{"product_id":"saree-4-lug-trailer-hub-kit-2-pack-2-000-lb-fits-4-4-bolt-pattern-black-corrosion-resistant","title":"Saree 4-Lug Trailer Hub Kit 2-Pack — 2,000 lb, Fits 4×4\" Bolt Pattern, Black Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eSaree's 4-lug trailer hub kit is a complete pair of 2,000 lb hubs built to fit 4×4\" mounting flanges and straight spindles with either 1\" or 1-1\/16\" diameters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-piece hub assembly bundles everything needed to convert or replace hubs on small boat trailers, utility trailers, and other light-duty rigs. Each kit includes both hub bodies, bearing sets for both spindle sizes, grease seals, dust caps, lug nuts, and cotter pins — packaged to resist shipping damage. The hubs are manufactured to US G3000-equivalent standards, finished in corrosion-resistant coating, and use hardened hardware designed to reduce wear and noise over time.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know these hubs will fit my trailer spindle?\u003c\/h3\u003e\n\u003cp\u003eThese hubs are made for straight spindles only (not tapered). They accept both 1\" and 1-1\/16\" spindle diameters by supplying the correct bearing sizes and grease seals for each dimension. Verify your spindle is straight and measure its outside diameter before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 4×4\" bolt pattern hubs rated at 2,000 lb capacity each\u003c\/li\u003e\n  \u003cli\u003eIncludes L44643 bearings for 1\" spindles and L44649 bearings for 1-1\/16\" spindles\u003c\/li\u003e\n  \u003cli\u003eSupplied grease seals: two 1.25\" ID and two 1.5\" ID for compatibility\u003c\/li\u003e\n  \u003cli\u003eNot compatible with tapered spindle designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and what do they prevent?\u003c\/h3\u003e\n\u003cp\u003eEach package contains the full hardware set needed to assemble both hubs, helping prevent common failure modes like oil leakage, bearing noise, and corrosion. The dust caps and sealed bearings keep contaminants out, while hardened lug nuts lower the chance of breakage under repeated use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 hub units (4-bolt pattern) and 4 dust caps for sealing hub interiors\u003c\/li\u003e\n  \u003cli\u003e4 L44649 and 4 L44643 bearings to cover both spindle sizes\u003c\/li\u003e\n  \u003cli\u003e8 lug nuts (1\/2\"-20) with 10.9 hardness rating for durability\u003c\/li\u003e\n  \u003cli\u003e4 grease seals (two 1.25\" ID, two 1.5\" ID) and 2 cotter pins included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the finish and packaging protect performance over time?\u003c\/h3\u003e\n\u003cp\u003eThe hubs are finished with a black corrosion-resistant coating and the dust cap surfaces are galvanized to resist wear and salt spray exposure. Each kit is double-boxed and individually boxed to minimize shipping damage, which helps ensure parts arrive ready to install and perform as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack coating passed a 96-hour salt spray test to resist rust\u003c\/li\u003e\n  \u003cli\u003eGalvanized dust caps add extra corrosion resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eIndividual inner boxes and outer box reduce transit impacts and scratching\u003c\/li\u003e\n  \u003cli\u003eHigh-strength materials and optimized heat-transfer properties extend service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires standard trailer tools and a straight spindle; castle nuts are not included so plan to reuse or purchase new ones if needed. Proper grease packing and torqueing to manufacturer specs will keep bearings quiet and reduce friction. Routine inspection of seals and lug nuts after initial miles is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires castle nuts (not included) and basic hand tools for fitment\u003c\/li\u003e\n  \u003cli\u003ePack bearings with grease and torque to recommended specs for safety\u003c\/li\u003e\n  \u003cli\u003eInspect seals, dust caps, and lug nuts after first few trips\u003c\/li\u003e\n  \u003cli\u003eReplacement parts and routine greasing extend wheel-end life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Saree hub kit is aimed at DIY trailer owners, small-boat trailers, landscapers, and light-equipment haulers who need a reliable 2,000 lb-rated hub solution that fits common 1\" or 1-1\/16\" straight spindles. It’s a practical choice for people upgrading worn hubs, building a new trailer axle, or replacing corroded components with a complete, well-packaged set.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these hubs fit a tapered spindle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit is made for straight spindles only; tapered spindles are not compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are castle nuts included with the hub kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Castle nuts are not included; the kit contains hubs, bearings, seals, dust caps, lug nuts, and cotter pins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Saree","offers":[{"title":"Default Title","offer_id":67585863286969,"sku":"B0D12HXGSZ","price":181.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/saree-front-hub-pair.jpg?v=1790478956","url":"https:\/\/redleafauto.ca\/products\/saree-4-lug-trailer-hub-kit-2-pack-2-000-lb-fits-4-4-bolt-pattern-black-corrosion-resistant","provider":"Redleaf Auto","version":"1.0","type":"link"}