{"product_id":"senven-rv-roof-sealant-1-gallon-white-waterproof-solar-reflective-elastomeric-coating","title":"SENVEN RV Roof Sealant 1 Gallon White — Waterproof, Solar-Reflective Elastomeric Coating","description":"\u003cp\u003e\u003cstrong\u003eSENVEN RV Roof Sealant is a 1-gallon, water-based white elastomeric coating that creates a durable, waterproof, and solar-reflective membrane to protect and extend the life of RV, camper, and trailer roofs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you're maintaining a travel trailer, motorhome, or camper, the right roof coating keeps rain, UV and temperature swings from damaging interior spaces. This SENVEN formula rolls on like paint, bonds to common RV roof materials (with primer where recommended), and reflects sunlight to reduce heat absorption. With low-VOC water-based chemistry and compatibility across EPDM, TPO, fiberglass and metal, it’s intended for long-term sealing, leak repair and roof-preservation projects.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sealant stop leaks and hold up to weather?\u003c\/h3\u003e\n\u003cp\u003eThe product cures into an elastomeric rubber film that stretches with roof movement and seals seams, fastener heads, and worn areas. Its flexible membrane resists water intrusion, thermal cycling and ultraviolet degradation when applied to the recommended thickness. Regular maintenance applications help prevent small issues from becoming costly leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForms a continuous waterproof barrier that resists ponding water.\u003c\/li\u003e\n  \u003cli\u003eElastomeric flexibility absorbs expansion and contraction.\u003c\/li\u003e\n  \u003cli\u003eUV-stable reflective finish reduces sun-driven deterioration.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common RV roof substrates when used with primer where needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and repairs is this coating suitable for?\u003c\/h3\u003e\n\u003cp\u003eSENVEN’s coating is formulated to adhere to EPDM, TPO, fiberglass and aluminum RV roofs, plus vent covers, skylights and awnings when prepared properly. For slick EPDM or TPO, using the recommended EPDM primer improves adhesion. It’s intended as part of a system—use seam tape and lap sealant on joints and transitions for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on EPDM, TPO, fiberglass and metal roofs with proper prep.\u003c\/li\u003e\n  \u003cli\u003ePairs with Liquid Rubber EPDM Primer for tough surfaces.\u003c\/li\u003e\n  \u003cli\u003eUse with seam tape and lap sealant on high-movement areas.\u003c\/li\u003e\n  \u003cli\u003eSuitable for patching, recoating and full roof renewals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much coverage and what application tips should I expect?\u003c\/h3\u003e\n\u003cp\u003eOne gallon covers about 50 sq ft at the final recommended thickness; a full five-gallon pail typically covers a 30-foot RV depending on surface texture and porosity. Apply with a roller or brush like paint, and allow proper cure time between coats. For durable protection, follow a system approach—treat seams, fasteners and transitions before the topcoat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimate 1 gallon per 50 sq ft for final film thickness.\u003c\/li\u003e\n  \u003cli\u003eRoll or brush on; ensure clean, dry surfaces for best adhesion.\u003c\/li\u003e\n  \u003cli\u003eApply primer on EPDM\/TPO and use sealant\/tape at joints.\u003c\/li\u003e\n  \u003cli\u003eStore unopened containers above freezing for future touch-ups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product safe and environmentally considerate?\u003c\/h3\u003e\n\u003cp\u003eThe formula is water-based and zero-VOC, eliminating strong solvent odors and reducing harmful emissions during application and cure. That makes it easier to use around people and stored recreational vehicles, provided standard ventilation and personal protective gear are used. Proper storage and disposal follow local regulations for water-based coatings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-based, zero-VOC formula reduces solvent exposure.\u003c\/li\u003e\n  \u003cli\u003eMilder application odor than solvent-based alternatives.\u003c\/li\u003e\n  \u003cli\u003eStore above freezing to preserve product for touch-ups.\u003c\/li\u003e\n  \u003cli\u003eFollow label instructions and local disposal rules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? SENVEN RV Roof Sealant suits RV owners, fleet managers and RV service professionals seeking a durable, reflective roof coating that repairs leaks and lowers heat gain. It’s ideal for anyone maintaining trailers, campers, motorhomes or rooftop accessories who wants a water-based, flexible coating compatible with common RV roofing materials and designed to be used as part of a complete sealing system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on EPDM roofs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—use Liquid Rubber EPDM Primer first for best adhesion, then apply the SENVEN coating per instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much area does one gallon cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One gallon covers about 50 sq ft at the recommended final thickness; texture and porosity affect actual coverage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SENVEN","offers":[{"title":"Default Title","offer_id":67585787723961,"sku":"B0F9BD9DW9","price":140.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/senven-rv-roof-sealant-front-gallon.jpg?v=1790477372","url":"https:\/\/redleafauto.ca\/products\/senven-rv-roof-sealant-1-gallon-white-waterproof-solar-reflective-elastomeric-coating","provider":"Redleaf Auto","version":"1.0","type":"link"}