{"product_id":"tanyo-suspension-tool-2-piece-kit-strut-spreader-lower-control-arm-pry-tool-heat-treated-steel-for-fwd","title":"TANYO Suspension Tool 2‑Piece Kit — Strut Spreader \u0026 Lower Control Arm Pry Tool, Heat‑Treated Steel for FWD","description":"\u003cp\u003e\u003cstrong\u003eTANYO Suspension Tool 2Set is a professional-grade pair combining a strut spreader and a lower control arm prying tool to safely separate ball joints, remove axles, and service FWD struts in confined wheel wells.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-piece kit brings targeted leverage and precise fitment for front-wheel-drive suspension work. Each tool is forged from heat-treated steel and shaped to access tight spaces commonly found on import and domestic FWD vehicles. The set is meant to reduce the need for disassembly, protect suspension bushings and knuckles, and make strut, hub, and control arm jobs faster and safer for both pros and experienced DIYers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the strut spreader make FWD strut replacement easier?\u003c\/h3\u003e\n\u003cp\u003eThe strut spreader applies controlled pressure to separate the strut from the hub and knuckle without hammering or prying on delicate components. Its precision-machined spreader end fits a range of spindle and strut flanges, letting you create the gap needed to remove or install the strut assembly while avoiding damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined tip to engage various strut and hub geometries\u003c\/li\u003e\n  \u003cli\u003eSlim profile made for narrow wheel wells and tight suspension pockets\u003c\/li\u003e\n  \u003cli\u003eReduces risk of bent spindles or cracked housings compared to improvised tools\u003c\/li\u003e\n  \u003cli\u003eWorks with common strut bolts and penetrated mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the lower control arm prying tool safer than a regular pry bar?\u003c\/h3\u003e\n\u003cp\u003eDesigned for 1\/2-inch drive use, the lower control arm prying tool locks onto contact points so leverage is delivered where it belongs instead of slipping off. Non-slip contact surfaces and a heat-treated body prevent bending, minimize tool chatter, and protect bushings and knuckles during separation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2-inch drive compatibility for controlled torque application\u003c\/li\u003e\n  \u003cli\u003eNon-slip contact geometry secures the arm and knuckle during prying\u003c\/li\u003e\n  \u003cli\u003eHeat-treated forging resists bending under high load\u003c\/li\u003e\n  \u003cli\u003eLimits collateral damage to seals, boots, and bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this set handle ball joint separation and axle removal tasks?\u003c\/h3\u003e\n\u003cp\u003eYes — the set was created specifically for ball joint and control arm service on FWD vehicles and many imports. By combining the spreader and the pry tool you can separate ball joints cleanly and create the clearance needed to withdraw CV axles or remove lower control arms without disassembling unrelated suspension parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks for ball joint separation without pounding on joints\u003c\/li\u003e\n  \u003cli\u003eProvides enough clearance to pull CV axles from hubs in many applications\u003c\/li\u003e\n  \u003cli\u003eReduces the need to remove extra components, saving time\u003c\/li\u003e\n  \u003cli\u003eSuitable for repeated shop use thanks to robust construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and operators will this kit fit and benefit most?\u003c\/h3\u003e\n\u003cp\u003eThe tools are made with universal-fit intent for a wide range of front-wheel-drive and many import models where space is restricted. They suit professional technicians who need repeatable, reliable gear and experienced DIY mechanics tackling routine suspension, ball joint, and axle jobs without a press or excessive teardown.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront-wheel-drive cars and light SUVs with tight wheel wells\u003c\/li\u003e\n  \u003cli\u003eImport models with shallow access to lower control arms and struts\u003c\/li\u003e\n  \u003cli\u003eShops performing frequent suspension and brake-related repairs\u003c\/li\u003e\n  \u003cli\u003eHome mechanics who want a safer, more precise alternative to improvised tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TANYO Suspension Tool 2Set is aimed at automotive technicians, independent mechanics, and capable DIYers who regularly service struts, ball joints, and axles on FWD and import vehicles. If you need hardened, reliable tools that reach confined areas, protect suspension components, and cut repair time, this kit is built for that work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my front-wheel-drive car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The set is designed for wide-fitment across many FWD and import models; verify clearance and mounting geometry for your vehicle before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the pry tool with a torque wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the pry tool accepts a 1\/2-inch drive for controlled torque application with compatible breakers or torque tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TANYO","offers":[{"title":"Default Title","offer_id":67593796845753,"sku":"B0H4LDHNBD","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tanyo-strut-spreader-front-view.jpg?v=1790578974","url":"https:\/\/redleafauto.ca\/products\/tanyo-suspension-tool-2-piece-kit-strut-spreader-lower-control-arm-pry-tool-heat-treated-steel-for-fwd","provider":"Redleaf Auto","version":"1.0","type":"link"}