{"product_id":"tkkeuep-fuel-filler-neck-hose-2-id-15-7-8-straight-nitrile-lined-reinforced-with-4-clamps","title":"TKKEUEP Fuel Filler Neck Hose — 2\" ID 15 7\/8\" Straight, Nitrile-Lined Reinforced with 4 Clamps","description":"\u003cp\u003e\u003cstrong\u003eTKKEUEP Reinforced Gasoline Fuel Filler Neck Hose is a straight, 2\" inside-diameter replacement hose (15 7\/8\" long) that includes four hose clamps and a nitrile-lined, nylon-cord reinforced construction for reliable fuel transfer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a cracked, brittle, or leaking filler neck hose is compromising refueling safety or causing fuel odors, this TKKEUEP replacement provides a durable, EPA-compatible option designed to withstand typical automotive conditions. Built with a nitrile rubber tube and internal nylon cording, the hose balances flexibility with strength and resists temperatures from -40°F to 212°F (-40°C to 100°C). It arrives long enough for most filler-to-tank runs and includes four stainless-style clamps so you can install it right away.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this hose hold up to fuel and temperature exposure?\u003c\/h3\u003e\n\u003cp\u003eThe TKKEUEP filler hose uses a nitrile inner tube formulated to resist gasoline and common fuel blends allowed by regulatory standards, while the nylon reinforcement prevents stretch and collapse. Its operating temperature range covers cold starts and hot engine bay conditions typically encountered in passenger vehicles and small equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNitrile tube resists fuel permeation and degradation.\u003c\/li\u003e\n  \u003cli\u003eNylon cording provides tensile strength and shape retention.\u003c\/li\u003e\n  \u003cli\u003eRated for -40°F to 212°F for broad environmental tolerance.\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet maximum fuel blend concentrations allowed by EPA guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the size and fit details I need to check before ordering?\u003c\/h3\u003e\n\u003cp\u003eThis filler neck hose is specified at 2 inches inside diameter and 15 7\/8 inches overall length, measured from end to end. To ensure compatibility, measure the inside diameter of your existing hose and the distance from the tank connection to the filler neck; you can trim the hose for a precise fit if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInside diameter: 2.00 inches (50.8 mm).\u003c\/li\u003e\n  \u003cli\u003eOverall length: 15 7\/8 inches (40.3 cm) before trimming.\u003c\/li\u003e\n  \u003cli\u003eDesigned as a straight connector—verify routing for bends or clamps.\u003c\/li\u003e\n  \u003cli\u003eIncludes four hose clamps sized to secure standard filler-neck fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for DIYers and professional mechanics alike: cut the hose to the required length, slide clamps over each end, push onto the filler neck and tank spigot, then tighten clamps. The hose is flexible enough to manipulate around common vehicle components and can be trimmed cleanly with a utility knife.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut with a sharp box or utility knife for a clean end.\u003c\/li\u003e\n  \u003cli\u003eUse a screwdriver or nut driver to tighten the hose clamps evenly.\u003c\/li\u003e\n  \u003cli\u003eFlexible construction simplifies routing through tight spaces.\u003c\/li\u003e\n  \u003cli\u003eCheck for secure clamp seating and leak test after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose work for venting or other fuel-system uses?\u003c\/h3\u003e\n\u003cp\u003eWhile optimized as a filler neck hose, the reinforced nitrile construction also suits certain fuel line and vent applications where a 2\" ID and the stated temperature\/fuel resistance are appropriate. Always confirm compatibility with your vehicle’s specifications and local regulations before repurposing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for filler neck, vent, and some fuel line duties when sizes match.\u003c\/li\u003e\n  \u003cli\u003eNot a pressure-rated high-pressure fuel injection hose—intended for low-pressure fill\/vent use.\u003c\/li\u003e\n  \u003cli\u003eCut-to-fit design allows adaptation for custom routing or replacement needs.\u003c\/li\u003e\n  \u003cli\u003eIncludes clamps to secure ends for low-pressure sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TKKEUEP Gasoline Fuel Filler Neck Hose is intended for car owners, mechanics, and small-vehicle technicians who need a reliable, easy-to-install replacement part for fuel filler connections. It suits vehicles and equipment that require a straight 2\" ID hose about 15 7\/8\" long, and for anyone who wants a resilient nitrile-lined hose with reinforcement and included clamps for a complete replacement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I trim this hose to fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose can be cut to the exact length needed; use a sharp utility knife and re-clamp the ends securely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose rated for modern fuel blends like ethanol blends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The nitrile tube is formulated to resist common fuel blends within EPA-allowed concentrations, suitable for typical gasoline\/ethanol mixes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TKKEUEP","offers":[{"title":"Default Title","offer_id":67591197098169,"sku":"B0BXCMSDKZ","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tkkeuep-fuel-filler-neck-hose-front-packaging.jpg?v=1790543480","url":"https:\/\/redleafauto.ca\/products\/tkkeuep-fuel-filler-neck-hose-2-id-15-7-8-straight-nitrile-lined-reinforced-with-4-clamps","provider":"Redleaf Auto","version":"1.0","type":"link"}