-
Vendor:MOCW
MOCW Cold Side Intercooler Pipe Kit 3.5in for 2011–2016 Ford 6.7L Powerstroke F-250/F-350/F-450 — Aluminum with Silicone Boots
The MOCW 3.5" Cold Side Intercooler Pipe Kit with silicone boot upgrade is a direct-fit aluminum replacement for the stock cold-side plumbing on 2011–2016 Ford 6.7L Powerstroke F-250, F-350 and F-450 trucks. This kit replaces the factory cold-side intercooler piping with a corrosion-resistant aluminum...- $136.81
- $136.81
- Unit price
- per
-
Vendor:MILIPARTS
MILIPARTS Engine Valve Cover for 2017–2019 Hyundai/Kia 2.0L — Aluminum, Gasket Kit Included
MILIPARTS Upgread Aluminum Engine Valve Cover is a direct-fit replacement for select 2.0L L4 Hyundai and Kia engines, supplying a durable, OEM-equivalent cover plus gasket, cap, and seals. If your vehicle uses the OEM part 22410-2E700 and you're replacing a cracked, leaking, or worn...- $165.19
- $165.19
- Unit price
- per
-
Vendor:GELUOXI
GELUOXI Timing Chain Tensioner Kit 06H109469 for 2.0 TSI/TFSI — OE-fit, 12‑Month Warranty
GELUOXI 06H109469 Timing Chain Tensioner Kit is a complete replacement kit engineered to restore precise chain tension and timing control for EA888 Gen2 2.0 TSI/TFSI engines in selected VW and Audi models. If your 2.0 TSI/TFSI engine shows noisy timing components, or you’re doing...- $115.13
- $115.13
- Unit price
- per
-
Vendor:A-Premium
A-Premium Oil Pan Sump Kit for Hyundai & Kia 2.0L/2.4L — Cast Iron, Complete Gasket & Bolts
A-Premium's complete oil pan sump kit replaces worn or leaking pans for many Hyundai and Kia 2.0L/2.4L engines, including gasket, drain plug, bolts and installation tools. This cast-iron oil pan assembly is a full service replacement designed for a wide range of Hyundai and...- $171.45
- $171.45
- Unit price
- per
-
Vendor:A-Premium
A-Premium Front HVAC Heater Blower Motor with Fan Cage for Peterbilt 325/330/337/348 — OE-Style, Boxed Assembly
The A-Premium Front HVAC Heater Blower Motor with Fan Cage is a direct-fit replacement blower assembly engineered to restore cabin airflow in compatible Peterbilt models without modification. If your Peterbilt truck's front HVAC is producing weak airflow or unusual noise, replacing the blower motor...- $150.58
- $150.58
- Unit price
- per
-
Vendor:A-Premium
A-Premium Radiator Fan Assembly for Jeep 4.0L L6 (1987–2001) — Single 9-Blade with Motor & Shroud
A-Premium Radiator Fan Assembly is a complete single-fan cooling unit with motor and shroud, designed to replace the original fan on compatible Jeep 4.0L models from the late 1980s through 2001. This replacement cooling fan from A-Premium is built to restore airflow and help...- $150.58
- $150.58
- Unit price
- per
-
Vendor:Dorman
Dorman Engine Valve Cover driver side 264-965 — direct-fit, heat-resistant OE replacement
Dorman 264-965 driver side engine valve cover is a direct-fit replacement designed to restore proper sealing and resist heat-related warping for your vehicle's engine head. When a valve cover becomes cracked, warped, or starts leaking oil, replacing it with a part that duplicates the...- $164.69
- $164.69
- Unit price
- per
-
Vendor:loongrie
loongrie Engine & Transmission Mount Kit for Ford Focus 2.0L (2012–2018) — Direct-Fit, Vibration-Reducing
loongrie Engine Motor and Transmission Mount Kit replaces worn mounts to restore stability and reduce vibration for 2012–2018 Ford Focus 2.0L L4 models. This kit from loongrie includes engine and transmission mounts engineered as direct-fit replacements for the 2012–2018 Ford Focus with the 2.0L...- $133.56
- $133.56
- Unit price
- per
-
Vendor:Fumoto
Fumoto F316L Quick Oil Drain Valve M14-1.5 — Bronze with L Nipple, One-Touch Lever for Clean, Fast Drains
The Fumoto F316L Quick Oil Drain Valve (M14-1.5) with L nipple is a bronze FL-series valve that lets you drain engine oil quickly and cleanly without tools or struggling with hot, stuck drain plugs. The Fumoto F316L is an OEM-grade, one-touch engine oil drain...- $110.94
- $110.94
- Unit price
- per
-
Vendor:ENA
ENA Engine & Transmission Mount Kit for Honda Civic 1996-2000 1.6L — Set of 5, OEM-Style Vibration Reduction
ENA engine and transmission mount set of five replaces worn mounts on 1996–2000 Honda Civic and 1997–2000 Acura EL 1.6L to restore stability, reduce vibration, and improve drivability. This complete OEM-style kit from ENA includes five precisely matched mounts—A6520, A6502, A6556, A6506, and A6526—engineered...- $160.99
- $160.99
- Unit price
- per
-
Vendor:AULINK
AULINK Harmonic Balancer Crankshaft Pulley for 4.8L/5.3L/6.0L — Direct-Fit OEM-Compatible Vibration Dampener
The AULINK 12576652 harmonic balancer is a direct-fit crankshaft pulley assembly designed to reduce vibration and restore smooth engine operation on select GM 4.8L, 5.3L and 6.0L gasoline engines. This replacement harmonic balancer (also called a crankshaft pulley) is engineered for vehicles that require...- $165.19
- $165.19
- Unit price
- per
-
Vendor:YZQPNB
YZQPNB 12-Point Head Stud Bolt Kit for GM LS Engines (2004–2019) — 8740 Chromoly, Black Oxide
YZQPNB's 12-point head stud bolt kit is a complete direct-replacement fastener set engineered to install and secure cylinder heads on 2004–2019 GM LS-series V8 engines. This kit supplies a full complement of hardened chromoly studs, 12-point nuts and precision washers designed specifically for many...- $135.98
- $135.98
- Unit price
- per
-
Vendor:Siptenk
Siptenk Expandable Neoprene Freeze Plugs Kit — 27pcs, 13 Sizes (3/4"–2-1/4") with Steel Hardware
Siptenk 27-piece expandable freeze rubber plug kit supplies 13 precisely sized neoprene expansion plugs and steel hardware for fast, leak-tight sealing of engine freeze/expansion holes. Keep a ready assortment of expansion plugs for engine work, pressure testing, exhaust sealing, and temporary repairs. This kit...- $119.28
- $119.28
- Unit price
- per
-
Vendor:Dorman
Dorman Engine Timing Cover 635-502 — Direct-Fit for Chevrolet & GMC 1995–2007, OE-Style Sealing
The Dorman 635-502 engine timing cover is a direct-fit replacement designed to restore proper sealing and alignment for compatible Chevrolet, GMC, Oldsmobile and Workhorse engines. This timing cover from Dorman replaces the original equipment part with the same mounting points and key dimensions so...- $108.83
- $108.83
- Unit price
- per
-
Vendor:YBDDZH
YBDDZH Engine & Transmission Mount for MINI Cooper 2014–2022 (Automatic 1.5L/2.0L) OE Fit, Durable
YBDDZH engine motor and transmission mount designed as a one-to-one replacement for 2014–2022 MINI Cooper models to restore drivetrain stability and factory fitment. Built to match original equipment fit and function, this engine and transmission bracket from YBDDZH is manufactured from high-grade materials and...- $163.31
- $163.31
- Unit price
- per
-
Vendor:C-Tzu
C-Tzu Intake Manifold Runner Control Motor for 2008–2013 Hyundai & Kia — Direct-Fit OE Replacement (28323-2G000)
The C-Tzu 911-922 intake manifold runner control motor is a direct-fit replacement actuator designed to restore proper intake runner positioning on compatible 2008–2013 Hyundai and Kia engines. If your vehicle shows uneven idling, reduced low-end torque, or engine fault codes related to the intake...- $140.15
- $140.15
- Unit price
- per
-
Vendor:Mievlyo
Mievlyo Engine Intake & Exhaust Valve Kit for Chevy Equinox GMC Terrain 2007–2017 — 16-Valve 2.0/2.4L Direct-Fit Alloy-Steel
Mievlyo Engine Intake and Exhaust Valves Kit is a complete 16-valve replacement set engineered to restore proper breathing and reliable performance for select 2.0/2.4L GM engines from 2007–2017. This valve set was designed for direct-fit replacement on a range of GM four-cylinder models, including...- $110.71
- $110.71
- Unit price
- per
-
Vendor:BELKEBIR
BELKEBIR Lower Intake Manifold for 3.6L V6 Pentastar — Pre‑installed Gasket, Direct‑Fit (2011–2021)
BELKEBIR Lower Intake Manifold with integrated gasket is a direct-fit replacement for 3.6L V6 Pentastar engines, restoring sealed airflow and reliable performance in compatible Dodge, Jeep, Chrysler, RAM and Fiat vehicles. This replacement lower intake manifold is engineered for vehicles equipped with the 3.6L...- $144.32
- $144.32
- Unit price
- per
-
Vendor:YEHERIT
YEHERIT Intake Camshaft Right Side for 3.6L V6 — Direct-Fit OE-Equivalent Replacement
YEHERIT 5184380AG is a right-side intake camshaft engineered as a direct-fit replacement for 3.6L V6 engines found in many Chrysler, Dodge, Jeep and Ram models. This camshaft is manufactured to replace worn or damaged right-side intake camshafts with OE-equivalent dimensions and mounting surfaces. It...- $165.19
- $165.19
- Unit price
- per
-
Vendor:Mardarth
Mardarth 3-Piece Engine & Transmission Motor Mount Kit for 2011–2016 Elantra 1.8L Auto — Direct-Fit, Reduced Vibration
Mardarth 3-piece motor mount kit replaces worn engine and automatic transmission mounts for 2011–2016 Hyundai Elantra and compatible models, restoring stability and reducing vibration. This complete kit includes the front right engine mount, the left transmission mount, and the front lower torque strut mount...- $165.00
- $165.00
- Unit price
- per
-
Vendor:Fukaixiang
Fukaixiang AFM Disabler Plug-and-Play OBD2 Module — 2026 Upgraded, Fits 4.3L–6.2L Chevy/GMC V6 V8, No ECU Mods, LED Indicator
The Fukaixiang 2026 Upgraded AFM Disabler is a plug-and-play OBD2 module that disables Active Fuel Management (AFM) / Dynamic Fuel Management (DFM) on compatible GM V6 and V8 engines without modifying the ECU. This compact device restores full-cylinder operation on supported Chevy, GMC, Cadillac...- $154.75
- $154.75
- Unit price
- per
-
Vendor:AULINK
AULINK Harmonic Balancer Crankshaft Pulley for 3.0L–3.6L V6 (5184293AC) — Direct-Fit, Rubber-Damped
The AULINK 5184293AC harmonic balancer is a direct-fit crankshaft pulley assembly engineered to reduce vibration and restore smooth operation on 3.0L–3.6L V6 Chrysler, Dodge, Jeep, Ram and VW Routan engines. This replacement harmonic balancer (also referenced as OEM 594405 / 5184293AG / 5184293AH and...- $129.72
- $129.72
- Unit price
- per
-
Vendor:Fel-Pro
Fel-Pro cylinder head bolt set ES72212 for Subaru — complete OE-equivalent TTY replacement restores clamp load
Fel-Pro ES 72212 is a complete cylinder head bolt set engineered to replace torque-to-yield fasteners and restore correct clamping for compatible Subaru engines. When rebuilding or servicing a Subaru cylinder head, using the correct head bolts is essential for achieving proper clamp load and...- $125.36
- $125.36
- Unit price
- per
-
Vendor:sevencow
sevencow M11 x 1.5 Head Bolt Thread Repair Kit — 33mm Long Inserts, Complete Tooling for Toyota Honda Cadillac Engines
The sevencow 35119S M11 x 1.5 Head Bolt Thread Repair Kit restores stripped head-bolt threads on many import and domestic engines using long 33mm inserts for a durable, torque-ready repair. When head bolt threads are damaged, reusing the cylinder head without a proper repair...- $144.32
- $144.32
- Unit price
- per
-
Vendor:Cloyes
Cloyes Timing Chain Kit C-3220 — Complete replacement kit with precision roller chain & guides
The Cloyes C-3220 Timing Chain Kit is a complete engine timing set designed to replace worn timing chains and related components for reliable engine timing restoration. Built by Cloyes, a long-established manufacturer of timing components, the C-3220 kit supplies the essential parts needed when...- $124.29
- $124.29
- Unit price
- per
-
Vendor:Hot Cams
Hot Cams 8.90mm Complete Shim Kit for KTM 250–505 (2005–2017) — 4140 Steel, 0.04mm Increments
Hot Cams HCSHIM00 is a complete 8.90mm shim kit for KTM 250–505 four-stroke models, supplying precision 4140 steel shims in 0.04mm increments to restore correct valve clearance quickly and reliably. When you need to reset valve clearances on KTM four-stroke engines from mid-2000s through...- $147.93
- $147.93
- Unit price
- per
-
Vendor:A-Premium
A-Premium Timing Chain Kit for GM V8 4.3–6.2L — 60-Link Chain, Tensioner & Sprockets
The A-Premium Engine Timing Chain Kit with tensioner is a complete OEM-spec replacement kit designed to restore timing drive reliability on GM 8-cylinder 4.3L–6.2L engines. This kit ships as a ready-to-fit timing chain solution including a 60-link chain, tensioner, cam and crank sprockets engineered...- $121.37
- $121.37
- Unit price
- per
-
Vendor:GMAFM
GMAFM AFM/DFM Module for GM 5.3L & 6.2L V6/V8 — Plug-and-Play Cylinder Deactivation Blocker, LED Status
GMAFM AFM DFM Module GM01 is a plug-and-play stability device that disables GM active fuel management (AFM/DFM) modes so your 5.3L or 6.2L V6/V8 runs consistently without unwanted cylinder deactivation. Designed specifically for many GM V6 and V8 engines, this newly updated AFM‑DFM unit...- $125.54
- $125.54
- Unit price
- per
-
Vendor:Yunnergo
Yunnergo Engine & Trans Mount Kit for Hyundai & Kia (2011–2017) — Front Right, Torque Strut & Left Trans
Yunnergo Engine & Trans Mount Kit is a direct-replacement, multi-piece mounting solution engineered to support and stabilize engines and automatic transmissions on compatible Hyundai and Kia models. This kit replaces the front right motor mount, front lower torque strut, and left transmission mount (automatic...- $151.75
- $151.75
- Unit price
- per
-
Vendor:GZYQPDZ
GZYQPDZ Aluminum Engine Valve Cover with Gasket — 1.4L Turbo L4 Fit for Chevy Cruze/Sonic/Trax, Complete Kit
GZYQPDZ's upgraded aluminum engine valve cover with gasket is a direct-fit replacement for specific 1.4L turbocharged Chevy, Buick, Cadillac and GM models, supplied as a complete kit to stop leaks and restore engine sealing. This precision-machined valve cover is built from high-quality aluminum and...- $169.36
- $169.36
- Unit price
- per
-
Vendor:Edelbrock
Edelbrock Valve Cover 4449 Signature Series 2.8-inch Low-Profile, OE-Style and Emissions-Compatible
The Edelbrock 4449 Signature Series Valve Cover is a low-profile, serviceable OE-style valve cover that accepts emissions gear and minimizes oil use through engineered breather baffles. Designed to combine show-quality styling with day-to-day practicality, the Edelbrock 4449 Signature Series Valve Cover offers a 2.8-inch...- $142.17
- $142.17
- Unit price
- per
-
Vendor:LUKYUCHA
LUKYUCHA Intake Manifold Runner Control Motor OE 28323-2GGA1 — Direct-Fit for Hyundai/Kia 2015–2019, Plug-and-Play
This is a direct-fit LUKYUCHA intake manifold runner control motor (OE 28323-2GGA1 / 283232GGA1 / 911-923) designed to restore proper runner control on compatible Hyundai and Kia 1.6L–3.3L engines. If your vehicle shows irregular idle, loss of midrange power, or an engine warning light...- $125.54
- $125.54
- Unit price
- per
-
Vendor:Wobiwina
Wobiwina Engine Intake Manifold Runner 283232GGA1 for Hyundai/Kia (2.0L–3.3L) — OE-Equivalent Direct-Fit
Wobiwina 283232GGA1 is a direct-fit intake manifold runner assembly designed to restore proper airflow control in select Hyundai and Kia 2.0L–3.3L engines. This replacement runner from Wobiwina is built to match original equipment fit and function for a range of Hyundai and Kia vehicles...- $125.54
- $125.54
- Unit price
- per
-
Vendor:loongrie
loongrie Engine & Transmission Mount Kit for 2010-2011 Toyota Camry 2.5L — Durable OE-Style Replacements, Reduced Vibration
High-strength loongrie engine and transmission mount kit engineered to replace worn mounts on 2010–2011 Toyota Camry 2.5L models, restoring stability and reducing vibration. If your Camry is showing signs of excess vibration, clunking during gear changes, or unusual engine movement, worn motor or transmission...- $188.14
- $188.14
- Unit price
- per
-
Vendor:A-Premium
A-Premium Condenser Fan Assembly for Honda CR-V / Element 2002–2006 — Direct-Fit Motor & Shroud, 7-Blade PA
A-Premium’s A/C condenser fan assembly is a direct-fit cooling fan with motor engineered to replace the original unit in Honda CR-V (2002–2006) and Element (2003–2006) models. This replacement condenser fan assembly includes the motor and shroud, built from durable PA material to resist wear...- $165.19
- $165.19
- Unit price
- per
-
Vendor:McrGinly
McrGinly PCV Crankcase Vent Valve 06K103495 - Direct-Fit for Audi VW Seat Skoda, Heat‑Resistant
McrGinly's crankcase vent valve (06K103495 series) regulates crankcase pressure and routes blow-by gases for a cleaner-running engine in compatible Audi, VW, Seat and Skoda models. This replacement positive crankcase ventilation (PCV) valve from McrGinly matches multiple OEM part numbers in the 06K103495 family and...- $110.94
- $110.94
- Unit price
- per
-
Vendor:AULINK
AULINK Engine Oil Pump for Chevy Equinox 2.4L/2.0L/2.2L (2002–2017) — Direct Replacement, Tested
AULINK 12637040 is a direct-replacement engine oil pump engineered to restore proper oil pressure for 2.0L, 2.2L and 2.4L Chevy Equinox engines from 2002 to 2017. When an oil pump wears or fails, engine lubrication and pressure suffer—leading to increased wear on bearings, camshafts...- $135.98
- $135.98
- Unit price
- per
-
Vendor:AULINK
AULINK Harmonic Balancer Crankshaft Pulley 12551537 — Direct-Fit for Chevrolet/GMC, Bonded Rubber Vibration Dampener
The AULINK 12551537 harmonic balancer is a direct-fit crankshaft pulley assembly engineered to reduce vibration and restore smooth engine operation for a wide range of Chevrolet and GMC models. This harmonic balancer (also called a crankshaft pulley) replaces worn or damaged dampers to help...- $123.46
- $123.46
- Unit price
- per
-
Vendor:Hipa
Hipa Tri-Fuel Carburetor Conversion Kit for 389/420cc Generators — Propane, Natural Gas & Gasoline, 3‑Position Selector
Hipa’s tri-fuel carburetor conversion kit lets compatible 338–460cc portable generator engines run on gasoline, propane (LPG), or natural gas (CNG) with a single direct-replacement carburetor. This conversion kit replaces a standard manual-choke carburetor on many Honda GX-series clone engines and a wide range of...- $131.80
- $131.80
- Unit price
- per
-
Vendor:Michigan Motorsports
Michigan Motorsports piston ring set for 4.8L & 5.3L LS engines — 3.779" (96mm) stock-bore moly/iron 1.5/1.5/3.0mm
Michigan Motorsports 2M4978 is a complete Hastings OEM-quality piston ring set for 4.8L and 5.3L LS-series engines built to match factory stock bore dimensions with moly and iron ring materials. If you are rebuilding or refreshing an LS-based small-block — including LM7, L59, LS4,...- $146.41
- $146.41
- Unit price
- per
-
Vendor:Jiataban
Jiataban Motorcycle Bolt Covers Kit 62pc Black — CNC Aluminum Snap‑On Engine Bolt Head Toppers
Engine bolt head toppers that tidy exposed fasteners and give Harley Touring and Softail models a mirror-like, low-profile finish. Keep your Harley’s visible bolts looking purposeful instead of neglected. This Jiataban kit supplies 62 black CNC aluminum and stainless-steel bolt caps sized to cover...- $125.52
- $125.52
- Unit price
- per
-
Vendor:zubaydee
zubaydee intake manifold runner control motor 283232GGA1 — OE direct-fit replacement, restores intake-runner actuation
zubaydee 911-923 283232GGA1 intake manifold runner control motor — a direct-fit OE replacement for select Hyundai and Kia engines that restores intake-runner actuation and drivability. This replacement intake manifold runner control motor (also listed as OE part numbers 911-923, 28323-2GGA1, 283232GGA1, IMA113) is built...- $125.54
- $125.54
- Unit price
- per
-
Vendor:ANGE ELEC
ANGE ELEC AFM Disabler AG001 Pro — OBDII AFM/DFM Disable for 5.3L & 6.2L GM Trucks (Plug-and-Play, No Reflash)
ANGE ELEC AFM Disabler AG001 Pro is a plug-and-play OBDII module that permanently disables AFM/DFM cylinder deactivation for compatible GM 5.3L and 6.2L engines, restoring constant full-cylinder operation. If your Chevy or GMC with Active Fuel Management (AFM) or Displacement Fuel Management (DFM) suffers...- $120.45
- $120.45
- Unit price
- per
-
Vendor:BELKEBIR
BELKEBIR Engine Valve Cover for Honda Accord & CR-V 2.4L (2013-2019) — Preinstalled Gasket & PCV, Reinforced Plastic
BELKEBIR Engine Valve Cover with preinstalled gasket and PCV valve replaces 12310-RDF-A01 to stop oil leaks and restore proper crankcase ventilation for 2.4L Honda Accord (2013–2017) and CR-V (2015–2019). This complete valve cover assembly is a direct-fit replacement engineered to match OEM mounting points...- $175.62
- $175.62
- Unit price
- per
-
Vendor:Melling
Melling Engine Oil Pump for GM LS-Series V8 — Cast-Aluminum, Standard-Volume
The Melling Engine Oil Pump is a direct-fit, internal wet-sump oil pump for GM LS-series engines, delivering standard volume and pressure in a cast-aluminum housing with included O-rings. Designed to replace the factory pump in many LS-series V8 engines, this Melling oil pump restores...- $165.21
- $165.21
- Unit price
- per
-
Vendor:loongrie
loongrie Engine Motor Mount for Nissan Versa 1.8L (2007–2012) — Direct-Fit, Vibration-Reducing Replacement
This loongrie engine motor mount is a direct-fit replacement for 2007–2012 Nissan Versa 1.8L (and compatible Nissan Cube models), engineered to restore engine stability and reduce vibration. If your Versa or Cube shows excessive engine movement, vibration in the cabin, or a clunk when...- $129.72
- $129.72
- Unit price
- per
-
Vendor:Allstar Performance
Allstar Performance 4L80E Locking Transmission Dipstick, Silver — Solid Steel Cadmium‑Plated
Allstar Performance ALL69118 is a locking, solid‑tube transmission dipstick engineered to give a secure, repeatable fluid check for Chevy/GMC 4L80E transmissions. This heavy‑duty dipstick replaces flimsy factory units with a steel cadmium‑plated solid tube and a positive locking mechanism that keeps the tube sealed...- $157.40
- $157.40
- Unit price
- per
-
Vendor:Dasbecan
Dasbecan High Volume Oil Pump M29-5HV — Direct-Fit High-Flow, High-Pressure Replacement for GM Vortec V8
Dasbecan High Volume Oil Pump Kit M29-5HV is a direct-fit, high-flow and high-pressure replacement oil pump built to increase lubrication capacity for GM Vortec V8 engines that see higher RPMs or heavier loads. If your Chevy, GMC, or related GM V8 runs hard, tows,...- $161.01
- $161.01
- Unit price
- per
-
Vendor:GDUKOP
GDUKOP Exhaust Camshaft for Hyundai & Kia 24200-2E074 Zinc-Alloy, Heat-Treated Replacement
The GDUKOP 24200-2E074 exhaust camshaft is a direct-fit replacement part designed to restore proper exhaust valve timing and reduce vibration and noise for compatible Hyundai and Kia engines. This camshaft is engineered as an aftermarket replacement for vehicles that list OE numbers 24200-2E074 or...- $132.01
- $132.01
- Unit price
- per
-
Vendor:Vevitts
Vevitts Portable Electric Oil Pump 12V 100W — Self-Priming Extractor for Car, Motorcycle & Boat
The Vevitts 12V 100W portable electric oil pump is a self-priming engine oil extractor that makes safe, single-person oil transfers and oil changes quick and tidy for cars, motorcycles, and boats. Small enough to store in a trunk yet built from aluminum alloy and...- $123.46
- $123.46
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.












































