Shocks, Struts & Suspension

AiYiGu 6333 front hood struts are a pair of gas lift shocks engineered to replace the factory hood supports on 2007–2011 Toyota Camry models, restoring smooth, stable hood opening and holding. If your Camry’s hood no longer stays open or rises unevenly, these direct-fit...

MOOG K7352 sway bar bushings are a durable, precision-molded stabilizer bushing kit engineered to restore quiet, controlled handling for compatible Jeep and truck applications. Built from high-quality thermoplastic and developed through MOOG's rigorous testing protocols, the K7352 kit replaces worn or cracked bushings to...

AiYiGu front hood strut shocks are a direct-fit replacement pair designed to lift and hold the front hood on 2006–2012 BMW 3 Series (E90/E91/E92/E93) models. If your BMW’s front hood no longer stays open or moves unevenly, these gas-charged hood struts provide a factory-style...

Easily 152-piece auto alignment body shim kit is a durable, zinc-plated assortment of thin spacers designed to fine-tune vehicle body and wheel alignment clearances. If you work on cars, trucks, or SUVs and need repeatable, precise spacing for body mounts or suspension geometry, this...

AiYiGu 6020 front hood struts are a direct-fit pair of gas shocks that replace worn hood supports on 2015–2017 Hyundai Sonata, providing controlled lift and secure hold for the front hood. If your Sonata's hood no longer stays open or lifts unevenly, these AiYiGu...

SYKRSS Front Hood Struts 4153 are a pair of 16-inch gas lift supports designed to replace the factory hood shocks on Ford F-150 (2004–2008) and Lincoln Mark LT 2008 models, restoring smooth, controlled hood opening and reliable hold-open performance. If your truck hood no...

AiYiGu 6489 front hood struts are a pair of gas lift shocks designed to replace the factory front hood support on 2011–2014 Hyundai Sonata 4‑door models (non‑hybrid), restoring smooth opening and secure holding of the hood. These hood lift supports are engineered to match...

ARANA 10mm ball stud L-shaped mounting brackets: a 4-piece steel kit (with 20 screws) engineered to attach 10mm ball-end gas struts to lids, doors, and panels. These compact L-brackets are made for reliable attachment of 10mm ball-end gas springs used in automotive, furniture, cabinetry,...

ARANA 10mm ball stud mounting brackets are a 4-piece steel bracket set (two angled, two flat) with 16 screws, designed to attach 10mm‑bore gas struts quickly and securely. These mounting brackets give you a simple, corrosion‑resistant solution for fitting gas springs to lids, hatches,...

The OEMTOOLS 25297 is a compact, drop-forged puller built to remove tie rod ends and Pitman arms quickly and reliably on compact cars and light trucks. This specialized puller combines a 2-1/16-inch yoke opening, a robust drop-forged steel yoke, and a heat-treated pressure screw...

AUCLIDIS hood strut lift supports are direct-fit gas shocks designed to replace the factory bonnet struts on Nissan Armada models from 2017 through 2021, restoring smooth, reliable hood lifting and secure open-hood holding. When a Nissan Armada’s hood no longer stays open or lifts...

The ARANA 7.5-inch 10 lb gas struts are a pair of sealed support pistons engineered to replace factory lift supports on truck tool boxes, RV cabinets, and storage lids, providing controlled opening and held-open support for panels weighing about 5–15 lbs. These two gas...

TOVASTY front sway bar links are direct-replacement stabilizer links engineered to restore steering stability and reduce suspension noise on compatible compact SUVs. These front sway bar links from TOVASTY are built to match original equipment dimensions while upgrading durability and corrosion resistance. They serve...

HUOPO C16-11028 12" gas struts are a two-pack of 40 lb lift supports made to replace factory shocks on truck tool box lids, camper shells, and similar panels. If your truck toolbox or topper lid sags, slams shut, or feels unstable, these gas struts...

QiMox hood struts are an OEM-fit, two-piece replacement that restores smooth, secure hood lift and hold for Infiniti G37 (2007–2013), Q60 (2014–2016), and Q40 (2015). If your Infiniti hood sags, drops, or requires extra hands to stay open, these QiMox gas struts provide a...

QiMox Hood Lift Supports SG402058 are direct-fit replacement gas struts that restore smooth, secure hood opening and holding for BMW E90/E91/E92/E93 models (2006–2013). If your BMW hood sags, slams, or no longer stays open, these QiMox hood lift supports provide a straightforward fix that...

AUCLIDIS 12-inch gas strut set (24lb / 107N) is a pair of replacement lift supports engineered to open and hold camper shell, truck topper, canopy doors, and toolbox lids safely and smoothly. If a worn or weak lift support leaves your truck topper, camper...

AUCLIDIS C16-11028 is a pair of 12-inch gas struts rated 40 lb (178 N) designed to replace worn lift supports on truck toolboxes, camper shells, toppers and pickup caps. These two replacement gas shocks restore smooth, controlled opening and holding of lids and doors...

AUCLIDIS 15-inch gas strut pair (24 lb / 107 N) designed to replace camper shell, truck topper, canopy, toolbox and window lift supports. This set of two gas struts is made as a direct-fit replacement for a wide range of OEM numbers (including 025531,...

AUCLIDIS C16-06389 are 14-inch gas struts (set of 2) rated 24 lb / 107 N designed to replace worn or broken lift supports on camper shells, truck toppers, toolboxes, and canopy doors. These replacement shocks deliver controlled opening and steady support for hatches and...

AUCLIDIS ML99-45 10-inch gas strut set (45 lb / 200 N) is a direct-replacement lift support designed to open, hold and gently lower toolboxes, RV cabinets, overhead doors and boat lids. These replacement gas struts come as a matched pair with mounting hardware and...

These AUCLIDIS 16-inch gas struts (38 lb / 169 N), sold as a set of two, replace worn lift supports on camper shells, truck toppers, and pickup canopies. Designed as a direct-fit replacement for a wide range of OEM numbers, the C16-09209 gas strut...

Vepagoo ML99-45 10-inch gas struts are a pair of 45 lb (200N) lift supports designed to safely hold and smoothly open truck tool box lids and similar hinged panels. These gas springs arrive as a ready-to-install two-piece kit with brackets and hardware, built to...

Aeagle front hood lift supports are direct-fit gas struts designed to replace the factory hood prop on 1982–1992 Chevrolet Camaro and 1982–1992 Pontiac Firebird models with steel hoods. These hood lift supports provide a modern, reliable gas-spring solution that restores smooth opening and secure...

Aeagle hood lift supports are a direct-fit pair of gas struts designed to replace worn hood shocks on 1999–2004 Jeep Grand Cherokee models, restoring safe, smooth hood opening and secure hold. These replacement hood lift supports from Aeagle are engineered to match the original...

AiYiGu rear hatch shock strut pair restores smooth, safe opening and secure support for the rear trunk lids of select Ford Mustang and Panoz Esperante models. If your Mustang or Esperante rear hatch feels heavy, drops unexpectedly, or the original lift supports no longer...

The MOOG K200876 kit replaces worn sway bar bushings on select Chevrolet Traverse, Buick Enclave, GMC Acadia and Saturn Outlook models with durable thermoplastic mounts engineered for long life and quiet operation. If your vehicle exhibits excess body roll, clunks over bumps, or you...

JAVIK Rear Shock Bushing Sleeve Kit is a complete replacement set of upper and lower shock bushings and steel sleeves designed to restore rear suspension fit and reduce play on Polaris Ranger models from 400 through 1000. This kit supplies the wear parts that...

Aeagle trunk lid lift supports are a pair of gas struts engineered to replace worn shock supports on Chevrolet Malibu sedans from 2008 through 2012, restoring smooth, controlled trunk opening and holding power. If your Malibu's trunk no longer stays open or lifts slowly,...

TadaMark 6333 front hood struts are a direct-fit pair of gas lift supports engineered to replace worn or weak hood shocks on 2007–2011 Toyota Camry models. If your Camry’s hood no longer holds open reliably or feels heavy to lift, these replacement bonnet struts...

A-Premium front sway bar link is a direct-fit replacement stabilizer link engineered to restore steering stability and reduce body roll on compatible Ford trucks and SUVs. This heavy-duty stabilizer bar link is built for front-left and front-right installation on select Ford F-150, F-250, Expedition,...

Performance Tool W1475 is an adjustable telescoping hood prop rod that secures vehicle hoods and lids from 18.5 to 40 inches with a twist-lock for stable, hands-free access. If you service vehicles or do DIY maintenance, a reliable hood support is essential for safety...

MOOG DRiV's Suspension Stabilizer Bar Bushing Kit is a thermoplastic sway bar bushing set engineered to reduce noise and resist cracking while restoring handling stability. This bushing kit replaces worn or degraded sway bar mounts to bring back predictable steering response and a quieter...

Complete repair kit for a pair of sway bar end links with American-made CODE RED bushings, washers, and nuts for a reliable bushing replacement. This Suspension Dudes kit supplies everything needed to refresh the worn bushings on both sway bar end links without replacing...

Aeagle front hood lift supports are replacement gas struts engineered to safely raise and hold the hood on 2007–2011 Toyota Camry models (Base/CE/Hybrid/LE/SE/XLE). If your Camry's hood no longer stays open or feels heavy when lifted, these direct-fit hood lift supports restore smooth, controlled...

MOOG K80819 is a direct-fit stabilizer (sway) bar bushing kit engineered to restore front suspension stability and reduce sway on compatible Toyota Tacomas. Designed and validated by MOOG engineers, this bushing kit uses a high-quality thermoplastic compound and precise molding to resist cracking, splitting...

ApplianPar front stabilizer (sway bar) end links replace worn OEM links on Honda Accord (2013–2017) and Acura TLX (2015–2019) to restore steering stability and reduce noise. If your vehicle shows sway bar clunking, uneven handling, or loose-feeling steering, fresh end links can bring back...

MOOG K201913 is a precision-engineered sway bar bushing kit designed to restore steering stability and reduce noise in compatible Subaru models. If your Forester, Crosstrek, XV Crosstrek or WRX is showing sway-bar noise, uneven handling or excess play, worn bushings are a common cause....

These two front stabilizer sway bar links from GZYQPDZ replace worn links to restore steering stability and reduce body roll on compatible Toyota and Lexus vehicles. If your car is showing sway, uneven handling, or clunking noises near the front suspension, faulty sway bar...

AiYiGu front hood strut shocks are a direct-fit pair designed to replace worn lift supports on 2004–2008 Ford F-150 and the 2008 Lincoln Mark LT, restoring smooth, controlled hood opening and secure hold. If your truck’s hood no longer stays open or lifts unevenly,...

ApplianPar front driver and passenger stabilizer (sway bar) end links are direct-fit replacement links engineered to restore steering stability and reduce sway on compatible Honda Accord, Crosstour and Acura TSX models. If your vehicle rides with looseness in turns or you hear clunks from...

MOOG K80820 is a replacement stabilizer (sway) bar bushing kit engineered to restore quiet, controlled handling for compatible Toyota and Lexus SUVs and trucks. If your Tacoma, 4Runner, GX470 or FJ Cruiser shows sway bar noise, looseness, or uneven steering feel, worn bushings are...

Dorman 924-070 Rear Leaf Spring Insert is a direct-fit bumper spacer engineered to restore original leaf spring spacing and cushioning for compatible vehicles. This rear leaf spring insert is crafted to replicate the fit, appearance and function of the factory spacer so suspension height,...

AiYiGu front hood strut shocks are a direct-fit pair designed to replace worn lift supports on 1997–2001 Lexus ES300 and 1997–2001 Toyota Camry sedans, restoring smooth, controlled hood opening and secure support. If your older ES300 or Camry has a hood that falls, jerks,...

MOOG K200884 is a thermoplastic stabilizer bar bushing kit engineered to restore sway-bar support and reduce noise in compatible Ford F-250 and F-350 Super Duty trucks. These replacement sway bar bushings are manufactured from durable thermoplastic and engineered to meet MOOG's testing standards so...

HUOPO 10mm ball-stud mounting brackets are a four-piece kit (two flat, two angled) with ten screws, engineered to secure 10mm gas struts reliably for lids, doors, and access panels. These mounting brackets from HUOPO give you a practical way to attach 10 mm connector...

HD Switch 9040H conversion kit replaces front wheel bushings with sealed bearings to deliver a more durable, lower-friction hub for 1.375" rims and 0.750" axles. This 4-pack front wheel conversion kit is designed as a direct, stronger replacement for aging bushing-style hubs used on...

USSKYBOY 2" square polyurethane bump stops (set of 2) cushion suspension travel and protect underbody components by limiting bottom-out events. These universal 2-inch square tapered bump stops are molded from durable polyurethane to replace worn rubber stoppers on cars, trucks, SUVs, vans, and many...

AiYiGu Tailgate Assist Shock Kit gently controls lowering and eases lifting of Dodge Ram tailgates for safer, quieter operation. Replace abrupt slams and stiff closing with a hydraulic-damped solution engineered for Dodge Ram pickups. This AiYiGu kit is a bolt-on assist shock and mount...

SecosAutoparts 6-piece front bumper bracket set for Chevy Malibu 2016–2018 replaces OE parts 20809859 and 20809860 to restore secure bumper alignment and support on both driver and passenger sides. If your Malibu’s front bumper shows gaps, misalignment, or loose mounting, this SecosAutoparts kit supplies...