HD Switch

HD Switch K3011-62110 ignition switch kit replaces worn Kubota switches and includes two protective umbrella keys to keep water and dust out of the keyhole. When an ignition switch fails on tractors, mowers or utility equipment, the root cause is often contamination entering the...

HD Switch AM107421 is a 12V 40A sealed starter relay kit with an LED indicator and wiring harness designed to replace failing starter solenoids that only click during starting for compatible John Deere, Kawasaki and Onan engines. If your mower, tractor or small engine...

HD Switch ignition switch kit replaces the D & E Series John Deere switch and adds an umbrella-style key cover to protect the keyhole from dust and water. This ready-to-install kit from HD Switch includes a premium ignition switch, a protective soft-grip umbrella key...

The HD Switch 20 AMP Upgrade 925-04174A is a heavy-duty replacement PTO/clutch switch built to handle 20 amps for Cub Cadet and Troy-Bilt machines, offering longer life and improved weather protection over standard 5A/10A switches. Many factory PTO switches are undersized for modern electrical...

HD Switch 20 Amp Upgrade PTO Switch for John Deere (AM131966 / AM119139) is a heavy‑duty, weather‑resistant replacement designed to handle continuous 20A loads and outlast standard 5A factory switches. If your PTO switch fails before a fuse blows or corrodes from exposure, this...

The HD Switch 20 AMP Upgrade K3011-62300 / K3011-62301 is a heavy-duty replacement PTO switch engineered to replace OEM 5A units with a more durable, weatherproof 20A-rated assembly. When a factory PTO switch is only rated at 5A or 10A for a circuit protected...

The HD Switch 20 Amp Upgrade AM118802 is a heavy‑duty replacement PTO switch built to last longer, handle full 20A loads, and resist weather for John Deere 717–997 series and LX172/LX173 tractors. This upgraded PTO (power take‑off) switch was engineered to solve the common...

HD Switch 500017 is a complete replacement starter ignition switch kit for Dixie Chopper mowers that includes a protective umbrella-style key to keep dirt and moisture out of the keyhole. If you operate a Dixie Chopper or similar outdoor equipment, the 500017 Starter Ignition...

HD Switch 9040H conversion kit replaces front wheel bushings with sealed bearings to deliver a more durable, lower-friction hub for 1.375" rims and 0.750" axles. This 4-pack front wheel conversion kit is designed as a direct, stronger replacement for aging bushing-style hubs used on...

The HD Switch TCA22740 starter ignition switch is a direct-fit replacement for many John Deere machines and includes a protective umbrella key design to keep water and dirt out of your ignition. If your tractor or mower won’t start because the original ignition switch...

HD Switch TCA22740 is a direct-fit replacement starter ignition switch for compatible John Deere equipment supplied with a protective umbrella key and mounting hardware. This replacement ignition switch is built to match OEM dimensions and function, offering a straightforward swap for worn or damaged...

The HD Switch 20 AMP Upgrade (part numbers 4174684 / 500016) is a heavy-duty replacement clutch PTO switch built to last longer and handle full 20-amp commercial loads on Dixie Chopper mowers. This upgrade switch replaces the common low-amperage factory switches that frequently fail...

HD Switch starter ignition switch with umbrella-style sealed keys replaces factory units and protects the keyway from water and dirt. This replacement ignition is engineered to fit John Deere models that use the same mounting pattern and electrical terminals. It ships as a ready-to-install...

HD Switch 20 AMP PTO clutch switch for Exmark and Toro mowers replaces low-rated factory parts with a durable, weatherproof 20A assembly built for heavy use. The HD Switch 20 AMP Upgrade (models 116-0124 and 103-5221) is a direct-fit clutch/PTO switch designed as a...

HD Switch 574455401 Dual Protection Starter Ignition Switch is a complete, weather-resistant replacement ignition kit engineered to keep dirt and water out of Husqvarna and AYP lawn and garden equipment for more reliable starts. This replacement ignition assembly replaces worn or failing starter switches...

HD Switch Starter Ignition with an umbrella-style protective key is a full replacement kit built to keep John Deere LA-Series tractor ignitions free of dust and water for reliable starting. This kit replaces worn or failed ignition switches on John Deere LA-Series machines and...

The HD Switch 20 AMP Upgrade PTO switch (fits 925-3233A / 925-04258A) replaces factory 5A/10A switches with a weatherproof, commercial-duty 20A switch designed for longer life and greater reliability. Many original-equipment PTO switches are undersized for circuits protected by 20A or 30A fuses, which...

HD Switch front wheel bushing-to-bearing conversion kit replaces worn bushings with sealed bearings and premium hub caps to restore smooth, reliable wheel rotation on compatible garden tractors and lawn mowers. This 4-pack conversion kit is designed for owners of Husqvarna, Craftsman, Poulan, Jonsered, AYP...

The HD Switch 20 AMP Upgrade 776476 is a commercial-duty PTO switch engineered to replace factory 5A/10A units on Hustler Super Z and Z4 mowers, providing a durable, weatherproof 20A-rated solution. If your mower’s factory PTO switch is nicking out before the fuse blows...

HD Switch 20 AMP Upgrade 056-8058-00 is a commercial-grade replacement PTO switch for Bad Boy Mowers that delivers a durable, weatherproof 20A-rated alternative to fragile 5A factory switches. If your mower’s PTO switch has been failing or burning out before the fuse, the HD...

The HD Switch 137-4100 is a heavy-duty replacement ignition switch bundled with two protective umbrella-style keys to block water and dust from the keyhole. Built for lawn, turf, and outdoor power equipment, this kit replaces worn or failing ignition switches on Toro and Exmark...

The HD Switch 20 Amp Upgrade Blade Clutch PTO Switch is a heavy-duty, IP53-rated replacement for Scag 463034 designed to endure commercial use and protect your circuit by handling full 20A loads. When your mower or commercial equipment uses a 20A or 30A fuse,...

This HD Switch starter ignition switch replaces worn John Deere keyed ignitions and includes soft-grip umbrella keys that shield the keyway from water and dirt. Upgrade your tractor or utility vehicle’s ignition with a factory-style replacement that installs using the included mounting hardware and...

These HD Switch 12V, 40A waterproof relays with LED indicators are plug-and-play replacements engineered to restore reliable power switching on Hustler mowers and similar heavy-duty equipment. Designed as a direct-fit 2-pack replacement for part numbers 601053 and 026237, these relays combine IP68-rated sealing, an...

HD Switch 483472 is a weather-resistant ignition switch replacement for Scag equipment that includes two soft-grip umbrella keys and a snap-in design for fast installation. This premium replacement ignition from HD Switch is built to keep the starter mechanism protected from the elements while...

These two rebuild kits provide complete hub bearing, seal, and hardware replacements for 3500 lb single or tandem trailer axles, using L68149 and L44649 bearing sets with 1.719" ID grease seals. Whether you're maintaining a boat trailer, pop-up camper, or light utility trailer, the...

HD Switch Starter Ignition Switch with a protective umbrella key is a direct-fit replacement ignition for John Deere EZTrak mowers that combines a durable switch body with a soft-grip umbrella key to shield against dust, dirt, and water. This replacement ignition assembly is built...

HD Switch 20 AMP blade-clutch PTO switch replaces the weak factory 5A/10A switches on John Deere ZTrak 800 and 900 series to deliver longer life, higher current capacity, and better weather resistance. If you own a John Deere ZTrak 800 or 900 series mower...

HD Switch X-ONE 2-Pack Heavy Duty High-Temperature Red Bearing Grease is a sticky, high-pressure lubricant formulated to protect bearings and spindles in extreme heat and moisture. This two-pack of X-ONE premium bearing grease delivers a thick, tacky red formula engineered for heavy-duty applications where...

These two HD Switch steering dampers are upgraded with dual dust seals to extend life and restore smooth steering response on compatible Toro Z-series mowers and similar equipment. If your mower's steering feels loose, noisy, or resistant, replacing worn dampers with a robust upgrade...

HD Switch 6-pack 086-1201-00 are fully sealed 12V, 40A replacement relays with built-in LED indicators, engineered to fit Bad Boy mowers and similar heavy-duty equipment. These relays replace common OEM 086-1201-00 units and bring IP68-rated weatherproofing plus an LED troubleshooting light to your electrical...

The HD Switch AM132500 is a weather-resistant ignition key module with a replaceable switch and protective umbrella-style keys for long-lasting, maintenance-friendly performance. This precision-engineered replacement ignition module was reverse-engineered by HD Switch to deliver a direct-fit, plug-and-play upgrade for compatible vehicles and equipment. It...

The HD Switch 20 AMP Upgrade AM135131 is a heavy-duty PTO switch built to replace the weak factory switches in John Deere X300 and X500 series, rated for continuous 20A service, IP53 protection, and a 100,000-cycle lifespan. This upgraded PTO (power take-off) switch from...

HD Switch 6-pack C3 spindle bearings deliver precision, high-speed performance with thermal-clearance C3 tolerances and synthetic high-temperature grease for longer life and less downtime. These premium spindle bearings (part numbers 59125000, 59225700, 59202600) are machined from high-quality steel and assembled with a synthetic grease...

HD Switch 4-pack adjustable drag links replace worn steering tie rods with 4130 steel, 360° crimped ends and threaded adjusters to restore alignment and extend tire life. This set of four upgraded adjustable drag links (part numbers 583513301, 583513401, 583513501) is built for accurate...

HD Switch GY20047/GY20048 steering spindle axle kit converts worn bushings to sealed bearings for smoother, longer-lasting steering on compatible lawn tractors and mowers. This complete spindle rebuild kit replaces tired bushing-style steering spindles with precision bearings and includes every fastener and cap needed for...

These HD Switch 2-pack adjustable steering drag links (597047802 / 597047902) are heavy-duty tie rods with 360° crimped ends and 4130 steel construction for precise wheel alignment and longer wear. Designed as a direct upgrade for lawn and utility vehicles, these adjustable steering drag...

HD Switch 2-Kit 482621/43581 is a premium wheel bearing upgrade for Scag mowers featuring spring-loaded seals and 100% 304 stainless steel axles for longer life and superior corrosion resistance. Replace worn or rusted wheel bearings and axles with a kit built to outlast factory...