JAVIK

JAVIK's front brake master cylinder is a direct-fit replacement for many Suzuki ATVs (OEM# 59600-44B11) engineered to restore front-brake control and reliable hydraulic pressure. If your Suzuki KingQuad, QuadRunner, QuadSport, QuadRacer, Eiger, Vinson, Ozark, QuadMaster or other listed model is showing spongy brakes, fluid...

JAVIK front wheel bearing and seal kit replaces worn components on Honda Foreman, Rincon and Rubicon ATVs to restore smooth, quiet steering and protect hub internals from water and dirt. If your Honda ATV shows play in the front wheels, unusual rumbling, or frequent...

JAVIK's handlebar control switch replaces the original start/stop and headlight controls for Honda TRX400EX Sportrax 400 models from 1999 to 2004, restoring full engine and light operation with a direct fit to OEM# 35020-HN1-000. If your Honda TRX400EX has a worn, damaged, or missing...

This JAVIK control switch assembly replaces the OEM handlebar switch for starting, running off, and headlight control on select Yamaha ATVs. If your Yamaha ATV’s left handlebar switch is worn, sticky, or nonfunctional, this replacement unit restores the engine start/run/off functions plus hi/lo/off headlight...

JAVIK Rear Shock Bushing Sleeve Kit is a complete replacement set of upper and lower shock bushings and steel sleeves designed to restore rear suspension fit and reduce play on Polaris Ranger models from 400 through 1000. This kit supplies the wear parts that...

These JAVIK rear brake shoes are a direct-fit replacement for a wide range of Honda Rancher and Foreman ATVs, engineered to restore reliable stopping power and long service life. If your ATV shows reduced rear braking performance, excessive pedal travel, or noisy drum brakes,...

JAVIK's 1" rear live axle bearing kit is a complete 3-hole mounting solution to replace or upgrade the rear axle bearings on go-karts, mini bikes, trikes and small ATVs. This ready-to-install kit is engineered for universal 1-inch solid axles and includes all the hangers,...

JAVIK front brake hose pair (OEM 1930752 / 1930753) replaces the factory line from each caliper to the brake tee, supplied with clamps for a direct fit on many Polaris ATVs. When a front brake hose shows wear, cracking, or leaks, replacing it with...

JAVIK's M33x1.5 flywheel puller is a dedicated right-hand thread removal tool designed to safely extract stator rotors from a wide range of Yamaha, Suzuki, Polaris and KTM engines. This precision puller is supplied as a single M33x1.5 right-hand thread kit (OEM # M33x1.5) built...

JAVIK M38x1.5 flywheel puller is a precision tool designed to safely remove OEM-styled flywheels from compatible Suzuki, Kawasaki and Arctic Cat models with an M38x1.5 right-hand thread. If you work on sport quads, dirt bikes or small-displacement motorcycles, getting a dependable puller that matches...

JAVIK's rear left axle wheel and brake drum bearing & seals kit is a complete replacement set designed to restore wheel bearing, seal integrity, and axle fitment for compatible Honda ATV models. This kit gathers bearings, O-rings, dust seals and clips into one package...

JAVIK's heavy-duty wheel bearing kit is a direct-fit replacement engineered to restore smooth, quiet wheel rotation on a wide range of Can-Am ATVs, UTVs and Spyder motorcycles. This repair kit supplies two precision bearings and two circlips sized 30x60x37 mm, made to match the...

The JAVIK 1911415 rear brake caliper assembly is a complete replacement unit engineered to restore reliable stopping power on compatible Polaris ATVs. If your Polaris Sportsman or Hawkeye shows a spongy pedal, uneven braking, or leaking caliper hardware, this JAVIK assembly provides a ready-to-fit...

JAVIK Semi-Metallic-Pro front brake pads are an upgraded semi‑metallic replacement designed to fit a wide range of Honda ATV models for improved fade resistance and longer life. These replacement front brake pads use a proprietary semi‑metallic compound formulated to balance strong stopping power, heat...

JAVIK Idle Air Control Valve Set replaces the throttle body IACV to restore smooth idling and consistent engine response on compatible Honda ATVs and UTVs. This replacement Idle Air Control Valve (IACV) is designed as an OEM-style substitute for Honda models including Rancher, Rubicon,...

Complete front brake shoe kit for Honda TRX200 and TRX250 Recon that replaces OEM# 06450-HC4-900 / 45175-VM0-003, supplying shoes, springs, clamps and pin tensioners for a ready-to-install repair. If your FourTrax front brakes feel weak, noisy, or show uneven wear, this JAVIK kit supplies...

JAVIK rear axle bearing and seal kit replaces Honda OEM parts to restore smooth rear-wheel rotation and keep contaminants out of the axle assembly. This comprehensive kit is designed specifically for Honda TRX250 Recon, TRX250EX and TRX250X models from 1997–2022. It bundles the radial...

JAVIK's complete spindle king pin tube bushing kit replaces worn kingpin hardware on compatible EZGO TXT/PDS and select shuttle/ST models to restore steering alignment and reduce play. If your EZGO golf cart or utility vehicle shows steering wander, excessive front-end play, or uneven tire...

JAVIK wheel center cap set replaces OEM# 44732-HC4-010 / 44732-HC4-000 to restore the finished look of front and rear Honda ATV wheels. These four replacement center caps are made as direct-fit aftermarket parts for a wide range of Honda ATVs, including Foreman, Rancher, FourTrax,...

JAVIK's left-handlebar start/stop control is a direct-fit replacement for Honda FourTrax TRX300 models, combining engine start/kill, headlight hi/low, and choke functions in one assembly. This compact control cluster is built to match the switch layout and OEM part numbers used on late‑80s and early‑90s...

Sturdy replacement shift lever assembly engineered to match OEM 24700-HP0-A00 fitment for Honda Foreman 500 manual TRX500FM/TRX500FPM/TRX500TM (2005–2011). If your Foreman 500’s shift lever is bent, worn, or missing, this JAVIK replacement gives you a precise, ready-to-install solution that follows the original specifications. Designed...

JAVIK’s upgraded leather seat cover is a one-piece, thick poly-urethane replacement crafted to fit Polaris Sportsman and Hawkeye ATVs from 2005–2014 with OEM-level tailoring. This replacement seat cover is designed to match original factory contours while adding a more durable, stretchable polyurethane leather surface....

JAVIK handlebar switch assembly is a direct-fit replacement for select Yamaha ATVs that controls engine start/stop, headlight hi/lo/off and choke from one OEM-style unit. This compact OEM-replacement switch (OEM# 5LP-83973-01-00, replaces 5LP-83973-00-00) mounts on the left handlebar and restores full electrical control for a...

Replacement JAVIK handlebar control that restores electric shift, start/kill, and headlight functions for Honda Rancher 350 ES (2000–2005) and Rancher 400 (2004–2007) models. This OEM-compatible control switch (35200-HN7-003 / 35020-HN5-A10) is a direct-fit replacement designed for Rancher ATVs with electric shift and automatic transmission....

JAVIK Fuel Gauge Gas Cap is a direct-fit replacement fuel cap with integrated float gauge for select Honda Rancher and Rubicon ATVs, designed to restore accurate tank-level readings and a secure seal. If your Honda ATV’s fuel gauge or gas cap is cracked, leaking,...

Complete front wheel bearing and seal kit specifically built for Honda FourTrax and Rancher 4x4 models, supplying bearings, seals, circlips and inner rings to restore front hub performance. If your Honda FourTrax or Rancher 4x4 is showing front-end play, noise, or moisture ingress, this...

JAVIK's Left Front Brake Master Cylinder is a direct-fit replacement designed to restore reliable front braking on compatible Polaris ATVs. This left-side front brake master cylinder replaces OEM number 2010238 (interchangeable with 2010196, 2010233, 1910684, 2050078, 2050072) and fits a wide range of Polaris...

JAVIK left-handlebar switch assembly replaces the start/stop and headlight HI/LO/off controls on compatible 1999–2001 Polaris ATVs. This OEM-style replacement consolidates engine start, engine off and headlight high/low/off functions into a single left-handlebar unit engineered to match the original mounting and wiring of many Polaris...

JAVIK Ball Joint & Bracket Kit (2-set) is a direct replacement suspension linkage kit engineered to restore steering and caster stability on compatible Polaris ATVs and UTVs. This kit contains two ball joints, two brackets and all mounting hardware designed to match multiple Polaris...

JAVIK’s carburetor airbox intake boot is a direct-fit replacement (OEM# 5412561) designed to restore the air seal between the carburetor and airbox on select Polaris ATVs. This replacement intake boot reproduces the OEM shape and mounting points used on Polaris Sportsman and H-awkeye models,...

JAVIK Front Brake Master Cylinder is a direct-fit replacement brake master cylinder engineered to match Polaris OEM numbers and restore reliable front braking performance on compatible Sportsman, Scrambler and Hawkeye ATVs. If your Polaris ATV is showing spongy brakes, leaks at the master cylinder,...

JAVIK Left Right Tie Rod End Kit is a full steering tie rod end replacement set engineered to restore precise steering and safe front-end control on compatible Polaris ATVs. If your Polaris Sportsman, Magnum, Scrambler, Trail Blazer or related ATV shows loose steering, uneven...

Complete replacement bushing kit for Club Car DS (1992 and later) covering front/rear leaf springs and upper A-arms with OEM-matching parts. If you own a 1992-up Club Car DS, this JAVIK kit gathers the most commonly replaced suspension bushings and sleeves into one package...

JAVIK 3235616/3235500 is a 3-piece replacement U-joint kit built to restore front and rear propeller shaft performance on compatible Polaris RZR and Ranger models. This heavy-duty U-joint set replaces worn or damaged universal joints on a wide range of Polaris ATVs and UTVs, covering...

JAVIK Front & Rear Shock Bushing Sleeve Kit is a complete replacement set of PVC bushings and high-strength steel sleeves engineered to restore shock mount fit and reduce noise for compatible Polaris ATV/UTV models. When your Polaris Ranger, RZR, Sportsman or Scrambler shows play,...

JAVIK Starter Clutch Gear Bearing is a direct-fit starter assembly kit designed to replace worn OEM starter components on select Polaris Sportsman, Outlaw and Predator youth ATVs. If your ATV struggles to engage or the starter feels rough, this complete replacement kit restores reliable...

JAVIK front wheel bearing kit replaces factory bearings on Kawasaki Teryx and Teryx4 750/800 models from 2008–2023 to restore smooth, reliable wheel rotation. If your Kawasaki Teryx shows front-wheel play, unusual rumble, or vibration, worn wheel bearings are a common cause. This JAVIK kit...

JAVIK's rear differential bearing and seal kit replaces worn components in Honda FourTrax 300 (TRX300/TRX300FW) models from 1988–2000, restoring proper differential fit and preventing leaks. If your FourTrax 300 is showing oil seepage at the differential or noises from the rear end during turns,...

JAVIK 2050078 front brake master cylinder is a direct-fit aluminum replacement for select Polaris ATVs, restoring front hydraulic brake control. This front brake master cylinder is engineered as a replacement unit for a range of Polaris models including Sportsman, Xplorer, Magnum, Big Boss, Worker...

JAVIK Rear Wheel Bearing Kit is a direct-fit replacement bearing and circlip set engineered to restore rear-wheel stability for compatible Kawasaki ATV and UTV models. This kit contains two precision bearings and two circlips designed to match Kawasaki OEM part numbers 92045-0107, 92045-0094, 92045-0102,...

High-strength aluminum front right brake master cylinder assembled to replace Kawasaki OEM 43015-1646 and restore reliable braking performance on compatible ATVs. This JAVIK front right brake master cylinder is a direct-fit replacement designed for a range of Kawasaki ATVs, including Bayou, Prairie, Brute Force,...

JAVIK Ball Joint Kit replaces the upper and lower ball joints on compatible Yamaha ATV/UTV models, supplying four ball joints plus nuts, split pins, and circlips for a complete front-end rebuild. This replacement set corresponds to OEM# 37S-23549-01-00 and is engineered to fit a...

JAVIK Taillight Lens & Socket Kit replaces the factory rear lens and socket assembly for compatible Honda TRX ATVs, restoring proper fit and light function. If your Honda TRX taillight is cracked, cloudy, or the socket is unreliable, this replacement kit offers an OEM-spec...

JAVIK Brake Master Cylinder is a direct-fit aluminum replacement for select Polaris RZR, Ranger, General and Brutus models listed under OEM#1911515 and compatible replacement numbers. If your Polaris vehicle shows soft brake pedal feel, fluid leaks, or diminished stopping response, fitting a correctly matched...

JAVIK's front right brake master cylinder is a direct-fit replacement assembly designed to restore reliable braking on compatible Kawasaki ATVs. If the original front brake master cylinder on your Kawasaki Bayou, Lakota, Mojave or Prairie is leaking, worn or producing spongy lever feel, this...

JAVIK Gas Cap replaces OEM# 709000868 to secure fuel openings on Can-Am Maverick, Defender, Commander and Traxter models from 2018–2023. If you need a direct-fit replacement fuel cap for your Can-Am side-by-side, this JAVIK gas cap is designed to match the original equipment dimensions...

JAVIK replacement upper/lower ball joints (4 pcs) fit multiple Polaris RZR, Ranger, Sportsman and Scrambler models to restore steering precision and suspension movement. These four ball joints and retaining rings are OEM-replacement components built from metal and rubber to match Polaris part numbers 7061220,...

JAVIK rear wheel bearings (40x74x40) are heavy-duty replacement bearings designed to restore smooth, quiet rear-wheel rotation on compatible Polaris ATVs and UTVs. These precision-engineered bearings match factory dimensions and include retaining rings so you can swap worn units without altering hub fitment. Made from...

These JAVIK outer tie rod ends are a direct-fit replacement kit designed to restore steering precision for many Polaris RZR, Ranger, ACE, Brutus HD, GEM and EM1400 models. When worn tie rod ends produce play, uneven tire wear, or vague steering, replacing them with...

JAVIK Fuel Gauge Gas Cap is a direct-replacement fuel cap with integrated gauge engineered to fit select John Deere Gator UTV models from 2010–2022 for accurate tank-level indication and a secure seal. This replacement assembly combines a molded fuel cap and float-operated gauge into...