Tow Hooks & Recovery Straps

Nilight’s 3/8" forged Grade 70 winch hook kit is a heavy-duty recovery hook assembly rated for a 35,000 lb working load, complete with a rubber cable stopper and all mounting hardware. This compact recovery kit gives off-roaders and tow operators a ready-to-install, high-strength hook...

Nilight's 3/8-inch forged steel winch hook kit is a heavy-duty recovery hook assembly with an integrated silicone cable stopper and full mounting hardware, built for demanding off-road and towing use. This compact kit replaces factory hooks and adds protection for your winch drum and...

VEVOR's V Bridle Chain is a Grade 80, 5/16" x 2 ft 2-leg transport chain rated 9,260 lbs and supplied with TJ hooks, crab hooks, pear link connectors and adjustable grab hooks for secure towing and load control. Designed for riggers, haulers and contractors...

VEVOR's heavy-duty 3" x 30' tow strap recovery kit delivers a 36,000 lb minimum breaking strength and includes reinforced loops, protective sleeves, two 3/4" D-ring shackles, and a compact storage bag for dependable vehicle recovery. Whether you're pulling a stuck Jeep from mud, recovering...

CURT 81277 is a zinc‑plated 7/16" snap hook with a spring‑loaded safety latch engineered to secure trailer safety chains and handle up to 5,000 lb gross trailer weight. When towing, small hardware choices make a big difference in both safety and confidence. The CURT...

CURT's 80313 is a 1/4" diameter, 24" Grade‑30 safety chain with a single latch hook rated for a 5,000 lb minimum break force. Towing requires dependable secondary connection points between a trailer and tow vehicle, and this compact safety chain from CURT delivers a...

The Camco 48742 Eaz-Lift ReCurve Hook Up Tool is a 20.6-inch powder-coated steel lever designed to safely and easily lift the ReCurve R3 and R6 spring bar onto hookup brackets during trailer setup. When hitching or unhitching a trailer, positioning the spring bar on...

BLACKHORSE-RACING 1/2" Grade 80 hammer lock safety chain connector link is a heavy-duty, rust-resistant coupling designed to secure trailer safety chains with a 12,000 lb working load limit. This two-piece set from BLACKHORSE-RACING is built for demanding towing tasks where a compact, robust chain...

The DC Cargo Mall Ratchet Strap Winder is a heavy-duty roller designed to quickly and neatly wind 4-inch flatbed and winch straps for trucks, trailers, vans, docks, and warehouses. Keeping large straps tidy speeds up load securement, reduces trip hazards, and protects webbing from...

MICTUNING's Aluminum Trailer Chain Holder Organizer with 7-way plug cover is a heavy-gauge, powder-coated mount that stores safety chains and a 7-way plug securely to prevent drag, tangles, and corrosion. Keep your trailer hitch area tidy and protected with a single-piece aluminum organizer built...

sumpluct's 2" x 20ft heavy-duty recovery tow strap is a 24,000 lb breaking-strength polyester strap designed for towing, vehicle recovery, and winch extension without hooks. This high-strength tow strap combines a compact 2-inch width with a 20-foot length and reinforced loop ends to deliver...

TECHPICCO Red Tow Hook Covers are durable silicone caps designed to protect and dress up the front tow hooks on compatible Ford F-150, Bronco, Ranger and Toyota Tundra models while remaining removable for recovery use. These bright-red tow hook covers replace missing or worn...

Hoypeyfiy 72157070643 is a heavy-duty replacement towing eye hinge hook engineered to fit BMW 1/3/5/7/X3/X5 E-series models and replaces part 72158266616. This towing eye from Hoypeyfiy is a direct-fit replacement designed for a range of BMW E-series vehicles (E60, E61, E65, E70, E87, E90,...

TGL Tree Saver Strap is a 3-inch by 8-foot heavy-duty winch and short tow strap with reinforced loops and a 30,000 lb rated capacity designed to protect trees and extend recovery lines. This compact, high-visibility strap is built for vehicle recovery, winch extensions, and...

Robbor 3/8" bolt-on grab hook kit is a Grade 70, forged-steel tow and anchor solution rated 4,700 lb WLL, supplied as a two-pack with backer plates and complete Grade 8 hardware for reliable bolted mounting. This bolt-on grab hook set from Robbor is built...

The NEIKO 51005A is a 2-inch by 20-foot heavy-duty polyester tow strap with drop-forged hook ends rated to 10,000 pounds for vehicle recovery and towing tasks. Built for roadside rescues and light-duty recoveries, this bright-yellow strap combines high-visibility polyester webbing with heat-treated metal hooks...

Peohud 8-inch Grade 70 J Hooks are heavy-duty, yellow zinc-plated tow hooks sold in a 2-pack and rated for 5,400 lbs to secure transport and safety chains on trailers, tractors, and trucks. These J hooks are forged for demanding towing and cargo control tasks...

The GIAHAND braided tow strap with forged zinc-plated hooks is a heavy-duty 5/8" x 18ft recovery rope rated 6,800 lbs break strength and a 2,266 lbs safe working load for towing vehicles and equipment. Built for roadside recovery, farm work, and light industrial towing,...

WOLFWILL's Aluminum RV Towing Chain Organizer secures safety chains and stores a 7-way trailer plug in an elevated, water-draining holder that mounts to 2" or 2¼" hitch/jack tubes. This compact aluminum accessory keeps towing essentials tidy and protected whether you tow a camper, utility...

WOLFWILL Aluminum RV Towing Chain Organizer is a heavy-duty 7-way trailer plug and chain holder that mounts to your trailer tongue to keep plugs off the ground and chains neatly stored. Keep trailer wiring and safety chains protected, easy to access, and out of...

These are 24 weld-on steel safety chain connection loops engineered to secure 3/8" or 5/16" trailer chains to a trailer frame. Designed for fabricators, trailer builders and anyone retrofitting towing equipment, these DSBGKJI weld-on chain clips provide a permanent anchor point for safety chains....

The WENHUALI 2 Pack 5/16" Clevis Slip Hooks are forged Grade 70 trailer hooks with spring-loaded safety latches, rated for up to 14,000 lb gross trailer weight for heavy-duty towing and load securement. These clevis slip hooks are built for demanding transport and recovery...

MICTUNING’s aluminum trailer chain holder organizer secures your 7-way plug, safety chains, and wiring in a weatherproof, die-cast aluminum housing that bolts to 2" and 2 1/4" tongue jacks. Keep trailer hookups tidy and protected with a compact, purpose-built organizer from MICTUNING. Designed for...

SnowyFox's aluminum 7-way trailer plug holder secures your 7-pin connector, stores excess wiring, and keeps safety chains off the ground for neater, safer towing. Keep trailer wiring and chains organized and protected with this all-in-one mounting bracket. Built from corrosion-resistant aluminum, the SnowyFox Trailer...

The ATENGIDR Quick-Release S-Hook is a one-piece G80 alloy tow hook that provides a rapid, tool-free connection for off-road recovery and towing with an 11,200 lbs working load and 33,000 lbs break strength. Built for ATV, SUV, pickup, truck and trailer use, this 3/8"...

NORJIN 6-pack 3/8" weld-on safety chain retainers are forged-steel anchors designed to secure 3/8" trailer chains to a welded flat surface, rated for a 25,000 lb working load. These heavy-duty chain retainers give your truck or trailer hitch a permanent, dependable anchor point for...

GRIP 30 ft x 4 in Heavy Duty Tow Strap is a reinforced polyester recovery strap with looped ends rated with a 20,000 lb breaking capacity for towing and off‑road recovery. Built for demanding roadside, farm, and trail situations, this tow strap combines heavy...

The HFS 2-inch x 30-foot tow strap is a heavy-duty polyester recovery strap with two metal hooks rated to handle up to 10,000 lb for towing and vehicle recovery. Built from tightly woven polyester webbing and reinforced stitching, this HFS tow strap combines long...

LENGSHIKEJI front tow hook is a heavy-duty alloy-steel towing eye designed to replace or upgrade the factory front tow point on compatible BMW models for reliable towing and recovery. This tow hook is manufactured to fit a wide range of BMW engine platforms (N20,...

Eorbow trailer safety cables are a pair of self-coiling, vinyl-coated towing chains with 7/16" snap hooks and a 5,000 lb break strength, sold as two 44-1/2" cables for secure trailer connection. If you tow boats, utility trailers, or light equipment trailers, dependable safety chains...

TOPZEA 2-pack bolt-on forged steel recovery tow hooks are heavy-duty, universal tow points rated up to 10,000 lbs for fast, secure vehicle recovery and towing tasks. These bolt-on recovery hooks from TOPZEA provide a straightforward, durable attachment point for winch lines, tow straps, or...

The High-PQ 3/8" winch hook is a heavy-duty, drop-forged clevis slip hook with a spring-loaded safety latch and matte black corrosion-resistant finish built for demanding towing and lifting jobs. Built from heat-treated forged steel and finished with a durable powder coat, this 1-piece winch...

ENLEE Mountain Bike Tow Strap is a compact, auto-retracting parent-child tow rope that safely links adult and child bikes for assisted riding up to 2.5 meters. This lightweight tow strap is designed for family rides and training sessions, letting an adult help a child...

Tnyeobae's 27" trailer safety chain kit pairs two zinc-plated Grade-30 chains with 1/4" spring-latch hooks rated to 5,000 lbs for reliable backup security when towing. If you tow a mid-size trailer, boat, or utility load, a dependable secondary connection between trailer and tow vehicle...

TECHPICCO red tow hook covers are precision-fit decorative caps that protect and dress the front tow hooks on Ford Super Duty F250, F350, and F450 models from 2017 through 2026. These tow hook covers combine a tailored fit, durable construction, and bold red styling...

VONLX Demon Tow Hook Bracket is a direct-fit front recovery mount for Toyota Tacoma (2009–2023) that replaces the factory tow hook and includes two 3/4" red shackles and spacers for ready-to-use recovery points. This kit gives Tacoma owners a durable, bolt-on recovery solution without...

The Threlaco Heavy Duty Tow Strap is a high-visibility 2" x 40' recovery strap with reinforced double hooks rated for up to 20,000 pounds, designed for towing, vehicle recovery, and emergency use. Whether you're recovering a stuck SUV, moving a trailer, or keeping a...

AODESTINY 2PCS 8" Heavy Duty J Hooks are forged Grade 70 tow hooks rated for 5,400 lbs each, finished in yellow zinc to resist corrosion for transport and cargo securement. These clevis-style J hooks are engineered for professional transport use: heat-treated, forged steel construction...

ARMORLOGISTICS Tow Dolly Basket Straps are a two-pack of heavy-duty 2" wheel tie-downs with flat hooks designed to secure 14"–17" tires to a tow dolly, rated 10,000 lbs break strength. These tow dolly basket straps provide a robust, weather-resistant way to anchor vehicle wheels...

iJDMTOY Front Tow Hook Ring is a CNC-machined anodized aluminum foldable D-ring designed to bolt into the Camaro Gen6 tow point for a race-inspired, rust-free styling accent. This tow hook kit fits 2016–2024 Chevy Camaro models and is built as an eye-catching, lightweight accessory...

ARMORLOGISTICS tow dolly basket straps are a two-pack of heavy-duty 2" wheel tie-downs with flat hooks, built for 14"–17" tires and rated to a 10,000 lb breaking strength. These wheel basket straps are made for transporting vehicles on tow dollies and car trailers where...

STARLEAPARTS Tow Dolly Straps are a two-pack of reflective tire bonnets with flat hooks designed to secure 14"–17" wheels to dollies, rated to a 10,000 lb breaking strength for reliable vehicle transport. Whether you move cars, ATVs, UTVs or trailer-loads of equipment, dependable wheel...

Hoowen E Track J hooks are heavy-gauge steel, spring-loaded E-track accessories (five 2" and five 4") designed to lock into standard E- and X-track rails to hang and organize tools, gear, and equipment. These Hoowen E Track Hooks come as a 10-piece set—five 2-inch...

Robbor Tow Dolly Basket Strap secures vehicle wheels on dollies and trailers using a 2" industrial webbing and twisted snap hooks for dependable hold on 14–19" tires. When transporting a car on a tow dolly or trailer, the right wheel strap prevents shifting, reduces...

Nilight’s 3/8-inch forged steel winch hook with integrated cable stopper is a heavy-duty recovery hook kit designed to protect your winch drum, reduce cable wear, and safely secure loads on off-road vehicles. When you need a reliable connector for towing, recovery, or rigging, this...

Rhino USA Tree Saver Tow Strap is a heavy-duty 3" x 8' winch extension and recovery strap rated for 31,518 lb, designed to protect trees and provide a secure, weather-resistant anchor for vehicle recovery. When you need a reliable winch extension that protects the...

The Rhino USA Tree Saver Tow Strap is a 3" x 8' heavy-duty polyester winch extension rated to 31,518 lb that lets you perform vehicle recoveries using a tree anchor without harming the tree. Designed for off-roaders, overlanders, and rescue-ready drivers, this tree saver...

AMBULL's Grade 70 3/8" bolt-on grab hook kit is a heavy-duty, forged-steel tow and load-anchoring solution that mounts to a 1/4" backer plate and delivers a 7,500 lb working load limit (15,000 lb break strength) for tractors, trucks, UTVs and RVs. Built for demanding...

AMBULL Tractor Bucket Grab Hook is a heavy-duty, bolt-on Grade 70 forged steel grab hook with a backer plate, rated 7,500 lb WLL (15,000 lb break strength) for secure towing and load anchoring. Built to fasten to tractor buckets, trailers, UTVs, RVs or truck...

AMBULL Tractor Bucket Grab Hook is a heavy-duty, bolt-on Grade 70 forged steel hook with backer plate designed to fasten chains and serve as a reliable tow anchor for tractors, UTVs, trucks and trailers. This two-pack of 3/8" bolt-on grab hooks offers a professional-grade...