BLACKHORSE-RACING

Complete HPOP high-pressure oil pump seal and base gasket kit engineered to restore leak-free operation on Ford 7.3L engines (1994–2003). This BLACKHORSE-RACING HPOP kit supplies the seals, O-rings, and base gasket required to service the high-pressure oil pump and regulator on 7.3L Power Stroke...

BLACKHORSE-RACING 1/2" Grade 80 hammer lock safety chain connector link is a heavy-duty, rust-resistant coupling designed to secure trailer safety chains with a 12,000 lb working load limit. This two-piece set from BLACKHORSE-RACING is built for demanding towing tasks where a compact, robust chain...

BLACKHORSE-RACING 3-piece 725 drive belt kit — a durable aftermarket replacement engineered to fit 30-series torque converters on Hammerhead and TrailMaster mid karts. These three 725 asymmetrical drive belts are built from reinforced rubber to provide consistent power transfer, heat and oil resistance, and...

BLACKHORSE-RACING 6" Small Slim Push-Pull Electric Cooling Fan kit is a compact 12V cooling solution that delivers up to 650 CFM for radiator, oil cooler and engine-bay airflow in tight spaces. This slim, high-flow fan assembly includes mounting brackets and tie straps for universal...

BLACKHORSE-RACING 10" Slim Fan Push Pull Kit is a reversible 12V, 80W slim-profile radiator cooling fan with universal mounting hardware designed to improve airflow for radiators, condensers, intercoolers and engine bays. This compact cooling fan kit pairs a 10-inch, six-blade high-flow fan with brackets...

BLACKHORSE-RACING's 10" slim 12V push-pull electric radiator cooling kit is a universal mounting fan assembly designed to increase radiator airflow and lower engine bay temperatures. This compact, high-output cooling fan is built to fit a wide range of cars, trucks and aftermarket radiators. The...

BLACKHORSE-RACING’s 7" slim electric radiator fan kit is a reversible 12V, 80W cooling assembly designed to deliver over 800 CFM in a compact, low-profile package with universal mounting hardware. This compact push-pull fan kit combines a thin housing and ten high-efficiency blades to improve...

These are three genuine BLACKHORSE-RACING 40-series cogged torque-converter belts engineered to replace Comet 203785/203785A and MANCO 12346 for reliable go-kart drivetrains. Whether you service a single kart or stock spares for a fleet, this pack gives you three identical belts sized to fit popular...

BLACKHORSE-RACING 10" Universal Slim Fan is a 12V, 80W push-pull electric radiator cooling fan kit that delivers up to 800 CFM with an included thermostat, wiring switch, relay and mount hardware for reliable engine bay cooling. This compact, high-performance cooling assembly is built to...

BLACKHORSE-RACING 12-inch slim 12V electric radiator cooling fan kit is a compact, high-flow puller designed to improve heat management for radiators, A/C condensers, intercoolers and engine bays. This universal mounting kit pairs a slim 10-blade 12.44" fan with brackets and tie straps so you...

BLACKHORSE-RACING's 14-inch slim 12V electric radiator fan kit is a reversible push-pull cooling solution that delivers up to 900 CFM in a low-profile 2.64" thickness for universal fitment on radiators and auxiliary cooling systems. This slim fan assembly combines high airflow, a compact profile...

These are three 22" wide, wrap-style RV step covers from BLACKHORSE-RACING that protect metal steps, scrape dirt, and add non‑slip footing with spring‑hook attachments. If you want an easy way to keep your camper entrance cleaner, safer, and more comfortable, these RV step rugs...

These are 50 high-pressure TR-600HP snap-in tire valve stems (1-1/4") designed to deliver durable, leak-tested sealing for wheels with a 0.453" valve hole. Whether you're servicing a fleet, rebuilding rims for trailers, or maintaining off-road vehicles, this kit supplies a bulk set of robust...

BLACKHORSE-RACING RV Steps Covers Rugs 3 Pack are 18" wide, carpeted stair covers designed to protect, reduce slipping, and trap dirt on camper and motorhome steps. These replacement stair rugs fit most 18" wide RV and camper steps and attach quickly with paired grommets...

The BLACKHORSE-RACING 12V Portable Electric Fuel Transfer Extractor Pump moves diesel, kerosene, or oil quickly and safely from drums, tanks, and vehicles for fast on-site fluid transfers. This compact, vehicle-powered transfer pump is built for workshops, farms, service vans and DIY mechanics who need...

BLACKHORSE-RACING 3 Ton (6,000 lb) jack stands are a pair of heavy-duty adjustable steel supports that lift and securely hold cars, SUVs and light trucks between 11.4" and 16.8". Designed for home garages and professional repair shops, these two jack stands deliver a combination...

Blackhorse-Racing's 12" universal electric radiator cooling fan kit combines a slim 10-blade 12V fan with a 180°F thermostat, relay and mounting hardware for auxiliary engine cooling. This complete kit is built to improve airflow when your vehicle needs extra cooling: the compact 12.44" diameter...

These BLACKHORSE-RACING jack stands are a pair of heavy-duty steel supports rated for 6 tons (12,000 lbs) each, adjustable from 14.6" to 24" to safely hold cars, SUVs and light trucks during maintenance. Built for professional and home garages, this pair of BLACKHORSE-RACING jack...

BLACKHORSE-RACING rear tail light brake lamp is a direct-fit, high-durability replacement for Toyota Camry 2010–2011 that restores lighting performance and gives your vehicle a sharper appearance. This aftermarket rear tail light assembly is built from impact-resistant ABS plastic and PMMA lenses to match OEM...

BLACKHORSE-RACING pair of 3" center/center single-chamber race mufflers are a universal-fit, high-flow steel exhaust solution engineered to deliver deeper throat tone and track-ready performance without complicated modifications. These compact performance mufflers combine a single chamber acoustic design with a 3-inch inlet/outlet layout and aluminized...

BLACKHORSE-RACING pair of single-chamber performance race mufflers — 2.5" center inlet/center outlet, 7" body for a bold, track-ready exhaust note. These universal race mufflers are built for drivers who want a compact, aggressive-sounding exhaust upgrade that fits many custom and bolt-on systems. Each muffler...

BLACKHORSE-RACING 30 Series Bore GO Kart CVT Torque Converter Kit is a complete replacement clutch set designed to restore smooth automatic belt drive performance on small engines up to 8 HP. This kit includes both a 6" driven clutch with a 5/8" shaft bore...

BLACKHORSE-RACING fender roller tool gently reshapes wheel arches so you can fit larger wheels or correct minor arch damage without cutting metal. Designed for DIY mechanics and professional body shops, this heavy-duty lip rolling and flaring tool bolts to the hub flange and uses...

BLACKHORSE-RACING 1" Torque Converter CVT clutch kit is a complete replacement drive unit engineered for 1" straight crankshafts and small engines producing roughly 8–13 HP. This compact torque converter set replaces common Comet units and fits a wide range of horizontal-shaft small engines used...

BLACKHORSE-RACING Pack of 2 radiator cooling fan assemblies for Honda Accord 2013–2017 provide direct-fit, pull-type replacements that restore proper radiator airflow and engine temperature control. If your Accord is showing signs of overheating, erratic AC performance, or a radiator fan that runs continuously or...

The BLACKHORSE-RACING 5 Gallon Air Tire Bead Seater is a heavy-duty, 145 PSI blast tank designed to deliver a fast, reliable burst of air to seat tire beads on cars, trucks, ATVs, and agricultural wheels. This portable bead blaster combines a 5-gallon steel tank,...

The BLACKHORSE-RACING 110V self-priming oil transfer pump is a compact, electric-driven unit designed to move light fuels (diesel, kerosene, biodiesel) at up to 60 L/min safely and reliably. This pump combines a 550W 110V AC motor with self-priming capability to deliver steady flow for...