Belts, Hoses & Pulleys

Meonum 2-Pack 5/16" (8mm) 1-foot submersible fuel hoses with clamps provide a ready-to-install in-tank fuel line solution compatible with E85 and other modern fuels. This kit delivers two short lengths of SAE J30R10-compliant in-tank hose plus four heavy-duty stainless-steel clamps for a straightforward replacement...

ZONBANG's preassembled 6AN fuel line kit is a ready-to-install, corrosion-resistant CPE hose assembly with aluminum swivel fittings in 0° and 90° angles for automotive fuel and fluid lines. This assembled kit packages a 2-foot, factory-finished 6AN hose with matched hose-end fittings so you skip...

yilenxuri VP Gas Can Hose is a two-piece racing fuel jug hose kit with precision ball-valve control and dual-function hose benders for spill-free, easy refueling. Designed for racers, landscapers, and homeowners who refill portable tanks often, this kit pairs flexible clear PVC hoses with...

EVIL ENERGY's 4-pack 6AN hose finisher clamps are black 6061-T6 aluminum end covers with captive worm-gear clamps, sized to fit hose outer diameters from 10 to 16 mm for a neat, durable finish. These hose finishers combine a machined aluminum collar and stainless steel...

CHUN YUNG DA TT Heavy Duty T-bolt hose clamps secure 17–19 mm (0.67–0.75") OD small hoses with wide 304 stainless bands and solid T-nuts for high-torque applications. These four T-bolt clamps are made to join or repair small-diameter hoses where a reliable, corrosion-resistant connection...

TonGass Combo Pack is a two-piece RV sewer hose adapter set that converts a 3" RV twist-on outlet to a glued 3" ABS/PVC sewer pipe for a leak-resistant, fast connection. Whether you’re replacing a worn outlet fitting or prepping your RV for a longer...

Heavy-duty 1.5" T-bolt hose clamps by ROADFORMER provide corrosion-resistant, uniform clamping for 41–48mm hoses with a 304 stainless steel band and reliable sealing. These ROADFORMER T-bolt hose clamps are engineered for secure connections on turbo, intake, intercooler, radiator and coolant hoses where a consistent,...

EVIL ENERGY 1/2" Silicone Heater Hose is a 5-foot, SAE 20R3-rated coolant and heater line built with braided polyester and dual silicone layers for long-lasting high- and low-temperature performance. This 1/2" (12.7 mm) inside-diameter silicone heater hose is engineered to handle heating, cooling and...

EVIL ENERGY's 8AN 180° hose end fitting is a 6061-T6 aluminum, 360° swivel fitting engineered to join 8AN CPE braided fuel hoses with a 3/4-16 UNF threaded port sealed by a 37° AN seat. This compact 180-degree hose end fitting pairs a standard AN...

EVIL ENERGY 8AN Hose Separator Clamp is a set of four 6061-T6 aluminum AN8 mounts designed to secure, separate, and organize 8AN fuel and fluid lines for a cleaner, safer installation. These AN8 hose separator clamps are machined from aircraft-grade 6061-T6 aluminum and built...

EVIL ENERGY's AN12 hose separator clamp is a set of four 6061-T6 aluminum mounts designed to secure and separate 12AN (24 mm OD) fuel and fluid lines for a neater, more reliable installation. These four clamps provide a simple, durable solution to route, space...

ROADFORMER 0.75 inch worm gear hose clamps are durable all‑300 series stainless steel clamps sized to secure hoses 17–32mm (0.67"–1.25") and sold in a 10‑piece pack. These SAE 12 style hose clamps combine a 1/2" band width with an inner worm gear screw to...

ROADFORMER 1 inch hose clamps are all-stainless-steel worm-gear fasteners sized for 19–38mm hoses, sold in a 10-piece pack for dependable, corrosion-resistant clamping. These clamps combine a 300-series stainless-steel band, housing and screw with a precision inner worm gear to give adjustable, long-lasting clamping for...

Ucreative 3.2FT Reinforced Silicone Vacuum Hose is a 1/2" (13mm) ID, 0.91" OD silicone tubing built with 4-ply polyester reinforcement for durable vacuum and fluid transfer at temperatures from -60 to 260°C. This reinforced silicone vacuum hose combines flexible silicone rubber with multiple polyester...

WYSIWYKA 2 Pack 3.5" T-bolt hose clamps are heavy-duty 304 stainless steel clamps sized to securely fasten 3.5" I.D. hoses with a working range of 95–103mm (3.74"–4.06"). These clamps are built for high-pressure hose connections in turbo and intake systems, radiators, marine hoses, and...

NewYall Engine Timing Belt Auto Tensioner replaces the factory tensioner for select Honda and Acura V6 models to restore proper belt tension and engine timing control. This auto tensioner is an OE-style replacement designed for a broad range of Honda and Acura V6 vehicles....

MOCA AUTOPARTS 6PK2775 is a 6-rib, 2775 mm EPDM serpentine belt engineered to replace OE belts on 2006–2011 Chevrolet Impala 3.5L engines. This replacement accessory drive belt is built from EPDM rubber for extended durability, matched rib geometry for efficient power transfer to alternator,...

Tongze's 2.5-inch cold air intake pipe is a universal, extendable PVC duct with a metal wire core that lets you build or modify an air intake hose from 9.5" up to 40". This flexible intake tube is designed for DIY engine bay work where...

Ucreative 6PCS 5FT Silicone Vacuum Tubing Hose Kit is a set of six odorless, high-temperature black silicone vacuum hoses (3mm–10mm ID) designed for reliable air and water transfer up to 428°F. This kit supplies six different inner-diameter vacuum hoses—3mm, 4mm, 5mm, 6mm, 8mm and...

X4XZ 13717605638 air intake inlet tube is a direct-fit replacement turbo intake hose engineered to restore airflow, reduce turbo lag and fit specified 2011–2018 BMW models. This replacement intake pipe is designed for a broad range of BMW petrol models and offers a durable,...

NIULPFZTK 1320399A is a 650mm stainless-steel heater fuel tank standpipe kit designed to replace worn or missing standpipes and enable safe fuel pickup for many Webasto heater models. This standpipe assembly provides a direct, durable replacement for the OEM part numbers 1320399A and 35320A....

Dtomi 13717605638 is a direct-fit replacement engine air intake hose engineered to connect the air filter box to the throttle body on selected BMW models from 2012–2017. This high-quality intake hose restores the pathway that delivers ambient air from the grille and airbox into...

The A-Premium 5-rib serpentine belt (34.44 in effective length) is a heavy-duty EPDM replacement designed to restore reliable accessory drive performance across compatible cars and medium-duty trucks. This serpentine belt replaces worn multi-rib drive belts on a wide range of vehicles, from Subaru performance...

Attwood 14531-6 are die-cast zinc fuel fittings engineered to connect Mercury/Mariner outboard engines and fuel tanks using 1/4" NPT threads and 3/8" I.D. hose. These fittings are purpose-built to maintain a dependable fuel line between compatible Mercury/Mariner systems and your tank. Constructed from durable...

MDEOOSKY 2-pack heater hose output T pipe (part 87248-60460) is a direct-fit replacement designed to restore coolant distribution for compatible Toyota and Lexus models. This pair of T-shaped heater hose output pipes replaces worn or damaged factory components on several Toyota and Lexus vehicles....

TERLIGSK gasoline fuel filler neck hose is a reinforced 2-inch inside-diameter replacement hose (15 7/8" long) supplied with four hose clamps for a secure tank-to-filler connection. This replacement fuel filler neck hose is built for dependable fuel transfer between vehicle or equipment tanks and...

Replacement fuel filler and vent hose kit for Jeep Wrangler YJ models with 20‑gallon plastic tanks from 1987–1995. This LSDZWORK kit supplies two replacement hoses plus four clamps designed to renew the fuel fill and vent connections on Jeep Wrangler YJ vehicles that use...

Region Offroad's 90° fuel hose is the direct-fit replacement that links the rear fuel supply to the filter inlet on fuel-injected Jeep Wrangler YJ models (1987–1995). Designed specifically for 2.5L and 4.0L fuel-injected YJ engines, this formed elbow hose replaces the original Mopar 53004014...

MAXWIN 6PK1885 is a replacement serpentine belt designed to route multiple engine accessories for a precise set of vehicle applications. This MAXWIN belt is an aftermarket drive belt engineered to match OEM routing and pulley profiles for several late‑1990s to 2000s passenger cars. It...

This ApplianPar kit supplies both the alternator/AC serpentine belt and the power steering belt designed to fit Toyota Avalon models from 1995 through 2010. When a worn belt starts to squeal, slip, or fray, replacing both drive belts at once helps restore smooth accessory...

The Bando USA 7PK1700 is an OEM-grade 7-rib, 1700mm serpentine belt engineered from EPDM rubber for long-lasting, heat-resistant drive performance. Bando has over a century of experience making rubber drive components and supplies many top automakers worldwide. The 7PK1700 belt is manufactured to meet...

Genuine Husqvarna V-Belt 532130969 is an OEM replacement drive belt designed to restore reliable power transfer on compatible lawn and garden equipment. When your mower, tractor or garden tractor isn't transmitting engine power correctly, the V-belt is often the culprit. The Husqvarna 532130969 is...

Replacement air intake hose engineered to restore proper airflow and seal for 2006–2010 Toyota Highlander and 2006–2008 RX400h models (fits part #17882-20140). When the original air intake boot becomes brittle, cracked, or leaks, engine performance, throttle response and fuel economy can be affected. The...

BrJJrYRu's 2" ID gasoline fuel filler neck hose is a 15-7/8" straight replacement designed to restore secure, EPA-compliant fuel transfer between tank and filler cap. This replacement filler neck hose is built for long-term durability and compatibility across automotive, marine, and agricultural fuel systems....

The loosoo 4L670 (part 32993) is a heavy-duty forward drive V-belt engineered to replace worn originals on specific Victory and Benchmark rear-tine tillers with 196–212cc engines. This replacement belt is designed to restore smooth, reliable forward drive on select rear-tine tillers from model years...

The uhzz Racing Fuel Jug Hose & Cap is a universal 5.5-gallon gas can nozzle and filler hose kit that converts racing fuel jugs into tidy, leak-resistant fuel dispensers. Whether topping off a mower, fueling a pressure washer, or servicing race gear, this kit...

Continental OE Technology Series 4060480 is a 6-rib, 48.0" multi‑V (serpentine) belt engineered to match OE fit and deliver quieter, longer life driven‑accessory performance. This Multi‑V belt from Continental replaces the earlier Elite Poly‑V design with a straight‑ribbed construction that aligns with original equipment...

EVIL ENERGY's 3/8" NBR fuel hose is a 10-foot, SAE 30R7-rated fuel line that resists oil and wear while handling up to 300 PSI working pressure. This heavy-duty fuel hose from EVIL ENERGY is built for vehicles and equipment that need a reliable, oil-resistant...

dojobkinb 1/2" (12mm) ID fuel line hose is a 10-foot NBR rubber push-lock hose rated for 300 PSI working pressure and designed for automotive fuel systems and engine applications. This 10-foot fuel hose from dojobkinb pairs a 12mm inner diameter with durable nitrile butadiene...

MILIPARTS aluminum radiator coolant filler neck is a direct-fit replacement part designed to restore proper coolant flow for compatible Chrysler, Dodge and Jeep models. If your vehicle’s coolant filler neck is cracked, warped, or leaking, replacing it with a precisely shaped aluminum unit helps...

EVIL ENERGY 5/16" NBR fuel hose is a 5-foot, SAE 30R7–compliant line built for fuel and oil transfer at up to 300 psi. This 5/16" (8 mm) inner-diameter fuel hose combines an oil-resistant nitrile rubber (NBR) tube with a braided polyester reinforcement to deliver...

High-quality replacement throttle body inlet heater pipe hose designed to fit 2011–2018 Chevy Cruze and Sonic models, using OEM-equivalent part numbers such as 25192905 for a straightforward plug-and-play swap. This CULMKARI throttle body inlet heater pipe hose is engineered as a direct replacement for...

VINMS 16576-3JA0A is a direct-replacement reinforced rubber engine air intake hose with clamps designed to restore proper air routing for select Nissan and Infiniti V6 models. This intake hose assembly replaces OE part number 16576-3JA0A / 165763JA0A and is engineered to fit specified Nissan...

VINMS 16576-1AA1A is a direct-fit replacement intake hose tube built to restore proper air flow to Nissan Murano (2009–2014) and Quest (2011–2017) engines. When the factory air cleaner intake hose becomes hard, cracked, or damaged it can introduce leaks that upset engine performance, fuel...

EVIL ENERGY 6AN male flare blanking plug is a black anodized 6061-T6 aluminum fitting that seals 6AN (9/16-18 UNF) flare connections to keep contaminants out. Designed for performance workshops, race cars, and custom fluid systems, this EVIL ENERGY blanking plug blocks open AN flare...

Mapleza 2-Pack Fuel Jug Hose is a replacement pour spout that fits 5.5-, 5- and 3-gallon racing and utility fuel jugs, delivering an easy, spill-reducing pour with an upgraded filter. When you need a reliable, durable hose for transferring gasoline from bulk jugs into...

Steelsoft Non-Slip Worm Gear Hose Clamps are heavy‑duty 304 stainless connectors designed to secure 1/2"–3/4" (12–20mm) hoses without cutting or stripping the tube. These German‑style, non‑perforated worm drive clamps combine a rolled band edge with a welded worm housing to protect soft rubber and...

Steelsoft Non-Slip Stainless Steel Worm Gear Hose Clamps are a 25-piece set of 304 stainless, non-perforated, rolled-edge clamps engineered to protect hoses while delivering reliable clamping torque for 3/8"–5/8" (10–16mm) fittings. These clamps use a German-style worm-drive design with a welded housing and a...

EVIL ENERGY 3/8" silicone vacuum tubing is a 5-foot, food-grade silicone hose rated for high temperatures and up to 130 PSI burst strength at room temperature, built for reliable vacuum and boost line use. Designed for demanding automotive and performance applications, this 10mm (3/8")...

EVIL ENERGY 3/16" silicone vacuum tubing is a 10-foot, food-grade silicone hose with a 5mm inner diameter built for high-temperature, high-vacuum automotive and industrial use. This premium silicone tubing combines flexible, non-reactive material with a thick wall to resist collapse under vacuum and tolerate...