Belts, Hoses & Pulleys

EVIL ENERGY 5/32" (4mm ID) silicone vacuum tubing is a 10-foot, food-grade silicone hose designed to deliver flexible, collapse-resistant vacuum and boost connections that tolerate extreme temperatures and high pressure. This 10FT (3.05 m) black silicone vacuum line combines a thin, flexible profile with...

The Ucreative 3.2FT reinforced silicone vacuum hose is a 16mm inner-diameter, 1m-long silicone tube built with 4-ply polyester reinforcement for high-temperature and high-pressure air and water applications. Compact and engineered for durability, this hose combines flexible silicone with a multi-layer polyester braid to resist...

VINMS 17228-5A2-A00 is a direct-fit replacement air intake hose tube with clamps designed for 2013–2017 Honda Accord 2.4L engines. This reinforced rubber intake hose restores airflow routing between the airbox and throttle body, matching OEM fitment and attaching hardware for a straightforward swap. Built...

VINMS 17228-REZ-A00 is a direct-fit replacement air intake hose assembly with clamps engineered to restore proper airflow to 2010–2011 Honda CR-V 2.4L engines. If your Honda CR-V is showing symptoms of reduced throttle response, rough idle, or visible damage to the intake ducting, replacing...

VINMS 17228-PNE-G00 is a direct-fit replacement engine air intake hose tube with clamps designed to restore proper airflow for compatible 2002–2006 Honda and Acura models. This replacement intake hose is engineered to match factory fitment for 2002–2004 Honda CR-V 2.4L and 2002–2006 Acura RSX...

The ROADFORMER 1.75 inch T-Bolt Hose Clamp is a heavy-duty 304 stainless-steel clamp designed to secure hoses with outer diameters from 1.62" to 1.85" (41–47 mm) and comes as a two-piece pack. These T-bolt clamps are built for demanding environments where vibration, pressure changes,...

ROADFORMER 2-inch T-bolt hose clamps are heavy-duty stainless steel clamps sized for hoses with an outside diameter of 1.81" to 2.05", sold in a 2-pack for secure, vibration-resistant hose connections. These ROADFORMER T-bolt clamps are built for applications where a consistent, wide-band seal matters...

YGDMD's 5-foot, 3/4-inch inner-diameter silicone heater hose is a reinforced cooling-line replacement rated to 650 PSI rupture pressure and built for water or gas transport in vehicle cooling systems. This professional-grade silicone heater hose is engineered for automotive cooling and heater circuit use, offering...

AFZZ Racing Fuel Jug Hose and Cap Kit is a complete replacement set designed to restore airtight, spill-resistant fueling for VP-style 5-gallon racing jugs. If you use VP racing fuel jugs or similar containers, worn caps and brittle hoses create leaks, spills and contamination...

IHOTDER 6PCS 5ft vacuum line kit provides six lengths of flexible silicone tubing in common diameters for air and water routing in cars and light equipment. This kit is a practical set of replacement hoses for DIY mechanics, hobbyists and professional technicians who need...

ban.do 7PK1715 is an OEM-grade 7‑rib serpentine belt from Bando USA, sized 1715 mm (67.5 in) and built with heat-resistant EPDM for long life and reliable power delivery. Bando has more than a century of rubber engineering and supplies many original equipment manufacturers worldwide....

MOCA AUTOPARTS 6PK2240 is a replacement EPDM serpentine belt engineered to restore accessory drive performance on 2009–2012 Jeep Liberty 3.7L engines. If your Liberty's accessories—alternator, power steering, A/C compressor and water pump—are slipping, squealing, or showing visible wear on the old belt, this direct-fit...

MOCA 6PK2580 is a 6-rib EPDM serpentine belt engineered to replace OE belts on Jeep Compass 2.0L models from 2007–2017, delivering long life, stable fit, and low noise. This replacement belt is manufactured from high-performance EPDM rubber and precisely molded to SAE-quality dimensions so...

MOCA AUTOPARTS 6PK2095 is a direct-fit serpentine (accessory) belt engineered to replace the factory belt on 2002–2008 Dodge Grand Caravan 3.3L engines. This heavy-duty replacement belt measures 6 ribs by 2095 mm (82.5 inches) and is molded from EPDM rubber to deliver long service...

TOP DRIVE 6PK2360 is a 93.46" EPDM serpentine drive belt engineered as a durable, direct-fit replacement for a wide range of cars and trucks. If your vehicle needs a reliable serpentine belt replacement, this TOP DRIVE premium belt combines EPDM compound and polyester cord...

joytrace M18x1.5 Oxygen Sensor Weld Bungs & Plugs Kit supplies five ready-to-weld O2 sensor bungs and five corrosion-resistant plugs for repairing or adding sensor ports on exhaust systems. Whether you're fixing a stripped sensor boss or installing extra monitoring points, this kit provides the...

The Gates 7PK2217 Micro‑V serpentine belt is a precision‑fit replacement belt engineered to match original equipment size and performance for cars and light trucks. Designed for both import and domestic vehicles, this Gates Micro‑V belt uses advanced materials and construction to deliver dependable power...

LDCRE’s Engine Air Intake Hose replaces OE 16576-1HK0A / 165761HK0A to restore proper airflow for 2012 Nissan Versa 1.6L and 1.8L engines. This replacement air intake hose is engineered to match the fit and function of the original equipment on 2012 Nissan Versa models...

A-Premium's upper radiator coolant hose is a direct-fit OE-style replacement for BMW X3/X4 models, engineered from reinforced rubber and plastic for reliable engine cooling circulation. This upper radiator hose (expansion tank to radiator) is designed to match the original fitment and performance for BMW...

The A-Premium 5-rib serpentine belt (40.47 in) is a direct-fit, EPDM K-series drive belt engineered to replace worn factory belts on compatible Buick, Chevrolet, GMC and Pontiac 4-cylinder models. This serpentine belt is designed to restore accessory drive function—powering the alternator, water pump, power...

WINBEST 6PK2325 is a replacement serpentine belt engineered to restore accessory drive function across compatible Chevrolet, GMC, Buick, Lincoln and other vehicles. This aftermarket 6PK2325 serpentine belt is built using updated materials and design practices to match OEM fit, form, and function. Each belt...

MAXWIN 6PK2580 is a direct-fit serpentine belt engineered to replace worn OEM belts on select Dodge, Jeep, Chrysler, Mercedes-Benz, GMC, Hummer, Lincoln, Ford and Hyundai models. This MAXWIN belt is built to the OE profile and specified length to restore accessory drive performance across...

FUSCH's 1 1/2" reinforced gasoline fuel filler neck hose is a 15 7/8" straight nitrile-rubber fuel filler hose kit that includes four stainless-steel clamps for a leak-resistant connection between tank and filler neck. This reinforced filler neck hose is designed to replace worn or...

koxuyim front windshield washer hose line is a direct-replacement tubing that connects the washer pump to the front tee on select Chevy, GMC and Cadillac trucks and SUVs for a reliable fluid flow. This replacement washer hose is designed to restore proper washer-fluid delivery...

MAXWIN 7PK1935 is a direct-fit EPDM serpentine belt engineered to replace factory 7PK1935 on 2.4L Toyota engines, restoring accessory drive performance with improved durability and quieter operation. If your vehicle shows signs of a worn accessory belt—squealing at startup, visible cracking, or frayed ribs—the...

Hayden Automotive 5979 is a heavy-duty idler and belt tensioner pulley engineered for 1" accessory belts, featuring a 3" outer diameter and 0.69" inner diameter for reliable belt routing and tension control. This replacement pulley helps guide and maintain proper tension on drive belts...

AC PERFORMANCE 3/4" NBR push-on fuel hose is a 2-foot, non-conductive, textile-reinforced fuel line designed for push-on AN fittings and compatible with E85, E10, oils, lubricants and coolant systems. This hose combines a high-grade nitrile rubber (NBR) liner with textile reinforcement and an elastomer...

LDCRE fuel vapor separator hose assembly replaces the evaporative emission line (F75Z-9D289-AA) to restore proper fuel vapor routing for compatible 1997–2004 Ford and 1998 Lincoln models. This replacement line is a direct-fit evaporative emissions tube designed to match the original F75Z-9D289-AA routing and connections....

Gates 27057 is a 3-foot transmission oil cooler hose with a 3/8" inner diameter, built from a nitrile tube and CSM cover for oil, abrasion, heat and ozone resistance. This hose is designed to link your vehicle's transmission to the oil cooler reliably under...

A complete 94-piece BILEKSU silicone vacuum hose kit that supplies six flexible 5ft hoses, 64 connectors and 24 clamps for reliable, heat-resistant vacuum and water routing in automotive, marine and industrial systems. Keep spare vacuum lines and fittings on hand with this all-in-one BILEKSU...

YINAVAGAD's aluminum upper radiator coolant hose is a direct-fit replacement for specific BMW 128i/130i/135i/325i/328i/330i/X1 models, designed to resist heat and swelling better than the original rubber line. This replacement upper radiator coolant hose swaps in for worn or leaking OEM hoses with a rigid,...

The Bando USA 7PK1320 is an OEM-grade 7-rib, 1320 mm (52 inch) serpentine belt engineered for long life and precise fit to modern engines. Bando has over a century of rubber manufacturing experience and supplies both original equipment and aftermarket belts built to the...

NOVAPARTS 46076 (F75Z9D289AA) is a replacement fuel vapor purge valve hose line designed to restore proper evaporative emission routing on compatible Ford and Lincoln trucks and SUVs. This engineered replacement tube restores the connection between the charcoal canister/evaporative emissions components and the purge valve...

MOCA AUTOPARTS 7PK1835 is a direct-fit EPDM serpentine belt engineered to replace the factory belt on 2008–2012 Honda Accord 2.4L engines. This replacement belt is manufactured from EPDM high-performance rubber to deliver consistent tension, reduced noise, and extended wear life for front-wheel-drive Honda Accord...

The YAMAKATO fuel line kit is a 3.3-foot set of oil- and ethanol-resistant gas hoses in five inner diameters (1/8", 5/32", 3/16", 1/5", 1/4") supplied with 30 mounting clips for small-engine fuel and vapor lines. This kit gives you a selection of commonly used...

AccEncyc's Gas Cans Racing Fuel Jug Hose Kit is a 14-inch transparent PVC spout with an integrated bottom filter, designed to fit most 3-, 5- and 5.5-gallon racing fuel jugs and prevent debris during refueling. Whether you work on the pit lane, maintain ATVs,...

DaisyInner 12 Pcs 6AN hose separator clamps are compact T-6 aluminum mounts that keep 3/8" fuel and fluid lines separated, secured and easy to service. If you run multiple 6AN (3/8" OD) hoses in an engine bay, racecar, boat or workshop setup, cluttered tubing...

Aspaton 15792821 is a direct-fit upper radiator hose engineered to replace worn or cracked hoses on GM 2000–2007 V8 trucks and SUVs. This replacement radiator hose is molded to match OE contours and connection points for a precise fit on compatible Chevrolet, GMC and...

The ban.do 7PK2090 OEM Quality serpentine belt is a direct-fit accessory drive belt engineered to match or exceed original equipment performance for many Lexus and Toyota models. This replacement belt combines OE-derived design with durable materials to deliver reliable power transfer for alternators, air...

A-Premium Serpentine Belt 6-Rib 71.42 In is a direct-fit EPDM K-section drive belt engineered to replace worn factory belts on many Chevrolet, GMC and Cadillac V8 models. This heavy-duty 6-rib serpentine belt from A-Premium measures 71.42 inches effective length and is built from durable...

The Bando USA 7PK1905 is an OEM-quality 7-rib serpentine belt measuring 1905mm (75 inches), designed to meet original equipment specifications for compatible Toyota, Scion and Pontiac models. Bando has produced automotive belts for over a century and supplies both OEM and aftermarket channels with...

Replacement upper radiator surge tank hose built to route coolant overflow from the radiator to the surge tank in select Cadillac and Chevrolet 2.0L engines. This X AUTOHAUX inlet hose (part number 22908202) is a direct-fit replacement engineered for Cadillac ATS and CTS 2.0L...

TUTUSIA's 22951182 air intake pipe hose is a direct-fit replacement designed to restore proper airflow to compatible Buick and Chevrolet V6 engines. If your vehicle uses the 22951182 intake pipe and has shown signs of reduced airflow, soot buildup, or damaged intake tubing, this...

Mhrxusd 3-piece engine drive belt kit replaces the front accessory serpentine belts on Toyota 3.4L V6 trucks (Tacoma, 4Runner, Tundra, T-100) from the mid‑1990s to early‑2000s. This complete set contains three OE‑style serpentine belts—4PK870, 4PK1050 and 4PK1070—designed to restore steady accessory drive operation for...

A-Premium Engine Coolant Overflow Hose is a direct-fit rubber coolant reservoir hose built to replace the factory bleed/overflow line on Chevrolet Cruze models from 2011–2016. This replacement coolant overflow hose from A-Premium is manufactured to match OE dimensions and restore a secure, leak-free connection...

uxcell Drive Belt Tensioner Assembly No.8844026100 is a heavy-duty replacement tensioner and idler pulley designed to restore correct belt tension and alignment on compatible Toyota engines. This full metal tensioner assembly is manufactured to replace worn or damaged belt-tension components on a range of...

Bando USA 6PK2375 is an OEM-quality EPDM serpentine belt engineered for a precise rib profile, superior heat resistance, and quiet, long-lasting operation. Made by a global belt manufacturer with over a century of rubber expertise, the 6PK2375 is built to the same standards Bando...

AA Ignition's Engine Air Intake Hose is a direct-fit replacement for Honda Accord 2003–2007 models that restores proper airflow between the airbox and throttle body. If your Accord is showing rough idle, hesitation, whistling from the engine bay, loss of power, or a check...

LANDSIN replacement serpentine drive belt 56992RNAA03 is a direct-fit EPDM multi-rib belt engineered to restore reliable accessory drive performance on Honda Civic L4 1.8L models from 2006–2011. This replacement belt is sized and shaped to match factory routing and accessory requirements for select Honda...

DriveFix Alternator Air Conditioning Serpentine Belt plus Power Steering Belt kit for Honda Accord 2.3L (1998–2002) replaces both drive belts in one convenient package. This two-belt set includes a 6PK1105 alternator/air-conditioning serpentine belt and a 4PK1065 power-steering belt, made to match the factory routing...