FUSCH Fuel Filler Neck Hose 1.5" ID 15-7/8" Long — Reinforced Nitrile with 4 Stainless Clamps

FUSCH's 1 1/2" reinforced gasoline fuel filler neck hose is a 15 7/8" straight nitrile-rubber fuel filler hose kit that includes four stainless-steel clamps for a leak-resistant connection between tank and filler neck.

This reinforced filler neck hose is designed to replace worn or cracked fuel filler lines on cars, trucks, lawn machines, and other engines that use a 1.5-inch inner diameter connection. Built from nitrile rubber with embedded nylon cords, the hose resists fuel swelling, stays flexible across a wide temperature range, and accepts simple trimming for fit. The kit includes four 304 stainless-steel clamps so you can secure both ends and any intermediate connections without buying extra hardware.

How does this hose hold up to fuel and temperature extremes?

The hose body is made from nitrile rubber, a material formulated to resist degradation from gasoline and petroleum products. Nylon-reinforced inner layers increase burst and tensile strength so the line remains stable under pressure and vibration. Rated for -40°F to +212°F (-40°C to +100°C), it covers typical outdoor and engine-bay conditions.

• Fuel-resistant nitrile rubber construction
• Nylon cord reinforcement for added strength
• Wide operating temperature range for varied climates

Will it fit my vehicle and how do I install it?

The hose measures 1 1/2" (inner diameter) and 15 7/8" in length, matching standard 1.5" filler neck fittings. Installation is straightforward: cut to the needed length with utility scissors or a blade, slide the hose over the fuel pipe/filler neck, and tighten the supplied clamps. No specialty tools are needed for most installs.

• 1.5" ID fits common filler-neck fittings
• Trim-to-fit length for versatility
• Four corrosion-resistant 304 stainless clamps included

How do the included clamps improve sealing and longevity?

The kit supplies four 304 stainless-steel worm-drive hose clamps that resist rust and provide uniform compression around the hose. Using properly sized clamps at each connection point minimizes fuel seepage and stops vibration-related loosening. Stainless hardware also extends service life in humid or salty environments.

• 304 stainless steel resists corrosion
• Worm-drive design offers even tightening
• Four clamps for secure dual-end and spare coverage

Can I modify this hose if my routing is different?

Yes — the hose can be shortened cleanly to match a specific routing path. After trimming, deburr the cut edge, fit over the pipe or connector, and clamp securely. Avoid sharp bends and kinks to maintain flow and prevent accelerated wear.

• Easy to cut to custom length
• Deburred edge prevents seal failure
• Avoid tight-radius bends to preserve integrity

Who this is for: DIY mechanics, restoration enthusiasts, fleet maintenance teams, and small-engine users who need a durable, fuel-resistant replacement filler neck hose that fits standard 1.5" connections. If you want a straightforward, serviceable hose kit that comes with corrosion-resistant clamps and can be trimmed to fit, this FUSCH assembly is tailored for routine fuel-line repairs and preventive maintenance.