OEMTOOLS

The OEMTOOLS 25297 is a compact, drop-forged puller built to remove tie rod ends and Pitman arms quickly and reliably on compact cars and light trucks. This specialized puller combines a 2-1/16-inch yoke opening, a robust drop-forged steel yoke, and a heat-treated pressure screw...

OEMTOOLS 25429 is a four-piece O-ring and seal removal pick set with short and long spoon and contour tips built for heavy-duty automotive and mechanical work. This compact kit groups two contoured picks and two spoon-style picks in 5.5" and 8.5" lengths so you...

OEMTOOLS 25443 is a compact 200cc manual fluid extractor pump that safely removes and refills common automotive fluids using a translucent graduated cylinder and two connectable extension tubes. This hand-operated fluid transfer pump is built for routine vehicle maintenance tasks like topping off power...

OEMTOOLS 25969 is a dedicated 4-pin hub locknut socket engineered to remove and install Toyota front hub locknuts safely and without rounding. The OEMTOOLS 25969 Toyota 4 Pin Hub Locknut Socket is a purpose-built 1/2" drive tool for servicing free-wheel hub locknuts on Toyota...

OEMTOOLS Oil Filter Wrench Pliers are adjustable pliers with forged steel jaws designed to grip and remove oil filters sized 2-1/2" to 4-5/8" safely and with strong leverage. These robust oil filter pliers combine a wide jaw range, an angled jaw profile, and cushioned...

The OEMTOOLS 24490 is a five-piece transmission and transaxle plug set that seals openings from 1" to 2.18" with a stepped, leak-resistant profile and includes a Ford side gear centering pin for precise alignment. This compact kit is built for technicians and home mechanics...

OEMTOOLS Collapsible Magnetic Tray Set is a two-pack of 4-1/2" foldable magnetic bowls that keep bolts, nuts and small tools secure on metal surfaces and collapse flat for compact storage. These foldable magnetic trays are built for people who work with fasteners and small...

OEMTOOLS 24688 is a compact metal transmission oil cooler line disconnect tool that cleanly releases 3/8" and 1/2" quick‑connect fittings on Ford and Cadillac vehicles. This tool is engineered for technicians and DIYers who need a small, reliable implement to separate transmission cooler and...

OEMTOOLS 25220 is a compact overhead valve spring compressor that lets you remove and install valve springs and keepers with the cylinder head in place, saving time and effort during valve work. Designed for mechanics and DIYers who service overhead-valve engines, this tool combines...

OEMTOOLS Brake Hub Resurfacing Tool with Pads is a drill-driven kit that removes rust and corrosion from wheel hubs so rotors sit flush for smoother braking and less vibration. When installing new rotors or performing brake service, uneven or corroded hub faces and lug...

OEMTOOLS 3-jaw magnetic oil filter wrench is an adjustable, heavy-duty removal tool that grips 2.4" to 3.6" filters and works with a 3/8" drive for fast, slip-free filter changes. This compact, durable wrench combines a spring-loaded three-jaw clutch with a built-in magnet and 3/8"...

The OEMTOOLS 27399 Ball Joint Spanner Wrench is a hardened-tooth socket-style tool built to remove and install ball joint adjusting sleeves on 1/2, 3/4 and 1-ton Dana 44 open-yoke front axles quickly and reliably. This specialized spanner wrench is tailored for the sleeve-style ball...

The OEMTOOLS 25258 is a heavy-duty 5-inch timing gear and pulley puller designed to remove crankshaft gears, pulleys, and tapped-hole timing gears quickly and safely. This compact, rugged puller uses a 5-inch yoke and two long 5/16-18 bolts to grab and extract gears from...

The OEMTOOLS 25200 Steering Wheel Puller is a universal steel kit that removes steering wheels safely and efficiently using a yoke, pressure screw, and three bolt sets for broad vehicle compatibility. When you need to remove a steering wheel for repair, airbag service, or...

The OEMTOOLS 25262 Pitman Arm Puller is a heavy-duty, drop-forged tool designed to remove Pitman arms from domestic cars and light trucks quickly and without harming surrounding steering components. Built for mechanics and DIYers who need controlled, repeatable removal of Pitman arms, this puller...

These eight OEMTOOLS brake caliper hangers keep calipers and hoses suspended and protected during brake, rotor, and suspension work. When you need a fast, reliable way to secure brake calipers and prevent stress on hoses while servicing pads, rotors, or steering components, the OEMTOOLS...

OEMTOOLS 27" x 34" vinyl fender cover protects vehicle paint and holds tools during maintenance without absorbing grease or acids. This heavy-gauge vinyl fender cover by OEMTOOLS is a professional-grade protector designed to shield fenders, hoods, and other exterior surfaces while you work. At...

The OEMTOOLS 25338 Window Molding Clip Remover is a 10.1‑inch, double‑sided carbon steel tool built to pry out trim and window clips cleanly without harming body panels. If you work on automotive body trim, door panels or window moldings, the right clip remover keeps...

The OEMTOOLS 25572 is a compact 500 mL manual fluid extractor pump that safely removes and refills small quantities of automotive fluids while showing fluid levels through a translucent, graduated cylinder. This hand-operated transfer pump is built for routine vehicle maintenance tasks—topping off reservoirs,...

OEMTOOLS 25440 Tube Bender Pliers are a compact, forged-alloy tool engineered to bend 1/4", 5/16" and 3/8" tubing up to 90° with consistent, low-damage results. Whether you’re routing brake lines, shaping fuel lines, or making tight HVAC runs, this hand-held tube bender delivers repeatable...

The OEMTOOLS 25115 Magnetic Nut Cup 2-pack are high-visibility, rubber-coated 6-inch bowls that use strong magnets to hold up to 5 lbs. of nuts, bolts, screws, and small tools on any flat ferrous surface. These magnetic parts cups are made to keep fasteners and...

The OEMTOOLS 7/8" (22 mm) O2 sensor wrench is a swivel-head removal tool built to reach and extract oxygen sensors from Ford 4.6L and 5.4L engines with a secure Posi-Grip hold. If you service SUVs or light trucks with Ford 4.6 and 5.4 engines,...

The OEMTOOLS 27059 Pilot Bearing Puller Attachment is a two-jaw slide-hammer accessory engineered to lock behind pilot bearings and press-fit bushings for controlled, damage-minimizing extraction when used with a compatible slide hammer and rod. This attachment is a purpose-built tool for separating small, hard-to-reach...

The OEMTOOLS 26052 is a four-piece collapsible magnetic tray set that keeps small fasteners and hardware organized, secure, and easy to access. These compact trays were built for hands-on work: each folds flat for storage, expands to a shallow 2" container, and uses a...

The OEMTOOLS 87009 No-Spill Coolant Funnel Kit is a 15-piece, transparent, no-drip funnel system designed to make radiator and fluid refills faster, cleaner, and more accurate. Whether you are topping off radiator fluid, bleeding a cooling system, or filling other automotive reservoirs, this kit...

The OEMTOOLS 25314 is a five-piece, impact-resistant nylon trim removal kit designed to remove automotive panels, moldings, wheel hub covers and fasteners without scratching paint or deforming trim. This compact kit brings a set of purpose-shaped plastic pry tools aimed at technicians, detailers and...

OEMTOOLS 26519 is a five-piece hook and pick set built for removing radiator lines, heater hoses, O-rings, clips and small fasteners without harming nearby parts. This mechanic-grade pick set combines long-reach hooks, offset picks and a short O-ring tool to make tight engine-bay work...

OEMTOOLS 87013 is a clear plastic oil drain pan with a built-in graduated scale that lets you catch, measure, and pour up to 4.5 liters of automotive fluids cleanly and accurately. This compact drain pan pairs a see-through body with a molded measurement scale...

OEMTOOLS 27146 hydraulic valve lifter tool is a slide-hammer puller designed to remove tight or seized hydraulic lifters cleanly and without damaging the engine block. When an engine teardown reveals stuck hydraulic lifters, the right extractor keeps the job moving and protects expensive components....

OEMTOOLS 26501 is a three-piece gasket scraper set made from heat-treated steel with steel striking caps and a rust-resistant finish for removing old gaskets, adhesives, and sealants. This compact toolkit gives mechanics and DIYers three blade widths—3/4", 1", and 1-1/2"—so you can tackle tight...

OEMTOOLS 25231 is a heavy-duty adjustable oil filter wrench engineered to remove large truck and diesel spin-on filters from 104 mm to 118 mm using a 1/2-inch drive. This adjustable filter wrench combines a wide gripping band, reinforced anchor plate, and alloy steel construction...

The OEMTOOLS 25252 is a heavy-duty automatic slack adjuster tool and reversible ratchet wrench designed to make precise air brake and drum brake adjustments on semi trucks faster and safer. Whether you're a fleet technician, owner-operator, or diesel mechanic, accurate slack adjuster tuning is...

OEMTOOLS 27311 is a vacuum-based bleeder kit that removes trapped air from power steering and brake reservoirs to speed up post-repair bleeding and protect your vacuum pump from fluid backflow. This compact kit supplies the adapters and catch bottle needed to perform a controlled...

The OEMTOOLS 24413 Tilt Locking Dual Foot Air Chuck is a heavy-duty, comfort-grip tire inflator designed to seal and inflate semi truck, tractor, and dually tires quickly and reliably up to 150 PSI. Built for mechanics, fleet drivers, and farmers who work with tandem...

OEMTOOLS 27261 is a 5-piece alternator decoupler pulley tool kit designed to remove and install overriding decoupler (OAD) and one-way clutch (OWC) alternator pulleys on most popular vehicles. When you’re servicing alternators, the right puller and driver set saves time and prevents damage. The...

The OEMTOOLS 24687 Serpentine Belt Tool Set is an 8-piece kit built to release tensioners and swap serpentine belts quickly, even in cramped engine bays. This compact kit puts the right shapes and sizes at your fingertips for most modern belt systems. Each component...

The OEMTOOLS 24434 is a purpose-built valve spring compressor that lets you compress and replace valve springs and retainers on 1991–2004 Ford 2-valve V8 engines without removing the cylinder head. This compact, heavy-duty tool is engineered to speed up valve service on compatible Ford,...

OEMTOOLS 25647 Spark Plug Saver is a five-piece M14-1.25 thread repair kit that permanently restores stripped spark plug threads using piloted reaming, swaging, and three size inserts. If a stripped spark plug hole has left you with cross-threaded or loose plugs, this OEMTOOLS kit...

OEMTOOLS 22389 Pro Magnetic Socket Tray is a slim, portable 3-row socket organizer that secures up to 36 sockets and tools with rubber-lined magnets and customizable studs. This magnetic socket tray is built to move with you: a compact 6" x 12" panel with...

OEMTOOLS 37306 is a long‑reach harmonic balancer and pulley installer kit with four threaded rods and a heavy‑duty driving nut, built to fit many Ford, GM, Dodge and Chrysler V6/V8 engines. This installer set is engineered to simplify and safeguard the final step of...

OEMTOOLS Power Steering Pulley Puller and Installer Kit is a complete, portable set for removing and installing pressed-on power steering and vacuum pump pulleys on most domestic vehicles. This kit supplies the fittings and adapters needed to handle common American and select European pump...

OEMTOOLS 87151 is a 10-piece oil filter cap wrench set engineered to remove a wide range of oil filters cleanly and quickly using a standard 3/8" drive. This compact kit groups ten commonly used oil filter cap sizes into one organized set so you...

OEMTOOLS 24899 Soft Fender Cover is a 42" x 24" fleece and microfiber pad with removable corner magnets that protects vehicle fenders from scratches and holds securely during repairs. When you’re working on a car, truck, or SUV, protecting painted surfaces is essential. This...

The OEMTOOLS 27187 Harmonic Balancer Puller Kit is a complete, heat-treated puller set designed to remove harmonic balancers, vibration dampers, pulleys, and gears — including specific bolts for GM 3300 and 3800 V6 engines. This compact kit delivers the hardware and design features professionals...

The OEMTOOLS 37263 is a portable exhaust back-pressure tester kit that reads psi and bar through the oxygen sensor to help pinpoint exhaust restrictions. When an engine feels sluggish, runs rough, or the check engine light indicates exhaust-related faults, measuring exhaust back pressure is...

The OEMTOOLS 24338 is a handheld 100A battery load tester that quickly evaluates 6V and 12V batteries, cranking volts, and charging system performance in about 10 seconds. Compact and built for workshop or roadside use, this analog-style tester combines heavy-duty copper-plated clamps, a shock-resistant...

The OEMTOOLS 24986 is a heavy-duty rolling mechanic stool that combines a stable wide base, 3" rubber casters, integrated storage and a 300 lb capacity for comfortable, efficient low-level work. Built for garages, shops and home projects, this mechanic creeper seat is sized and...

The OEMTOOLS 25090 Harmonic Balancer Puller Kit is an adjustable 3-jaw puller set with spring-loaded jaws and four forcing rods designed to remove harmonic balancers and crankshaft pulleys in tight engine bays without radiator removal. This compact, vehicle-compatible puller kit combines stable holding, multiple...

The OEMTOOLS 24539 Heavy Duty U-Joint Puller is a solid-steel removal tool that extracts 1"–1.25" bearing cups from driveline assemblies safely and quickly without hammering or heating. When you're working on passenger cars, SUVs, or light-duty trucks, removing stubborn U-joints can be time-consuming and...

The OEMTOOLS 27069 Cooling System Pressure Test Pump is a handheld radiator pressure tester that pressurizes and checks automotive cooling systems up to 30 PSI to help locate leaks quickly. Built for mechanics and DIYers, this pump lets you introduce and hold pressure in...