Lisle

The Lisle 19852 Truck and Trailer Wheel Pan is a durable polypropylene tray designed to catch oil from wheel hubs while you service truck or trailer wheels. When working on heavy vehicle wheels, escaping oil from hub bearings and seals can create a mess...

Lisle 65150 Flexible Back Probes are silicone-insulated, bendable test probes designed to reach tight connectors and sensor wiring without disconnecting terminals. When you need to test harness connectors, sensor leads, or tightly packed terminals, the Lisle 65150 probes bend into cramped spaces while maintaining...

Lisle 65250 Bearing Packer is a durable hand tool that forces out old grease and evenly injects fresh grease into bearings up to 4-1/2" diameter. If you service wheel, agricultural, or industrial bearings, the Lisle 65250 Bearing Packer speeds up greasing jobs while reducing...

The Lisle 56750 Seal Puller is a 12-1/2" hand tool with two tip sizes designed to quickly and safely remove oil and grease seals using leverage. When a stuck oil or grease seal needs extracting, the Lisle 56750 provides a simple, mechanical solution: slide...

Lisle 18232 is a 10" translucent offset funnel with a lid and spout cap designed to reach awkward openings and keep fluids clean while you pour. Built for automotive and workshop tasks where straight funnels won’t fit, this offset spout funnel places the mouth...

The Lisle 39190 is a hinged aluminum disconnect tool made to release 3/4" GM heater hose quick-connect fittings safely and in confined spaces. When working on GM cooling and heater lines, factory-style quick-connect fittings can be hard to reach and tricky to separate without...

The Lisle 35150 Window Belt Molding Remover is a powder-coated, universal tool designed to pry and lift automotive window belt moldings quickly without scratching glass or trim. If you service vehicle interiors or do DIY trim work, this remover speeds up the process of...

The Lisle 55000 Magnetic Soldering Clamp is a detachable, magnetized helping-hands tool that secures wires and small parts for hands-free soldering and detail work. When you need steady, reliable support while soldering small components, the Lisle 55000 provides flexible positioning and a strong magnetic...

Lisle 39310 is a double-ended A/C disconnect tool designed to release plastic quick-connect fittings on most 1998 and newer Toyota air conditioning lines quickly and without damage. This compact, U.S.-made service tool lets technicians and DIYers disengage high- and low-pressure Toyota A/C connector collars...

The Lisle 29810 #1 Antenna Nut Socket is a double-ended replacement socket designed to remove and install common domestic and foreign antenna nuts quickly and reliably. This compact socket is a direct replacement for the Lisle 29650 antenna tool and is built to tackle...

The Lisle 19860 Tire Deflator lets you rapidly lower tire pressure without removing the valve core, so you can set and restore pressures faster and keep TPMS sensors undisturbed. When adapting tires for soft terrain, snow or towing, precise, repeatable pressure reduction matters. The...

Lisle 20750 Remote Starter is a rugged, push‑button remote starter switch that lets you jog or start an engine using heavy‑gauge, rubber‑insulated copper wiring for reliable connection and smooth operation. The Lisle 20750 Remote Starter is designed for technicians and DIYers who need a...

The Lisle 63250 Wide Range Filter Wrench is a top-loading removal tool engineered to strip oil and similar spin-on filters between 3 1/8" and 3 7/8" without slipping. Designed for mechanics and DIYers needing a compact, dependable way to remove standard-size spin-on filters, this...

The Lisle 10500 is a two-stone brake cylinder hone designed to restore and finish brake cylinder bores ranging from 11/16" to 2½" (17.4–63.5 mm) with controlled pressure and square-ended stones for end-to-end contact. Mechanics and DIYers use the Lisle 10500 Brake Cylinder Hone to...

Lisle 32150 Power/Ground Outlet provides a simple, vehicle-mounted 12V power connection and a dedicated chassis ground point for accessory testing and temporary power needs. This compact automotive accessory gives technicians, hobbyists and roadside do-it-yourselfers an easy way to access vehicle electrical power and a...

The Lisle 37950 camshaft lock tool secures Honda K-Series camshafts so you can set and maintain correct timing chain alignment with confidence. When servicing timing components on K20 and K24 engines, holding the camshafts exactly where they need to be is critical. The Lisle...

Lisle 22930 is a low-profile 3/8" Jiffy-Tite disconnect tool designed to release lines from Jiffy-Tite quick-connect fittings without removing the retaining clip. If you work on fuel, coolant, or vacuum lines that use Jiffy-Tite quick-connect fittings, the Lisle 22930 provides a slim, purpose-shaped solution...

The Lisle 57850 Battery Carrier is a heavy-duty steel lifter that clamps securely under a battery lip so one person can lift and move vehicle batteries safely and with balance. Moving automotive, motorcycle, or marine batteries becomes safer and simpler with a dedicated carrier....

The Lisle 46950 Relay Puller Pliers are a specialized hand tool designed to remove electrical relays from tight sockets on most domestic, import and industrial vehicles without damaging the relay or socket. When relays sit deep inside fuse boxes or tight engine bays, standard...

The Lisle 63900 Window Holder is a simple, universal cable-and-suction tool that secures car or truck door glass in the raised position while you repair regulators or replace glass. When replacing window regulators, working inside a door panel, or adjusting glass alignment, having the...

Compact, double-sided steel tool designed to install stretch belts on GM 5.3L, 6.2L and 6.6L gas engine pulleys safely and accurately. The Lisle 59560 is a purpose-built belt installation tool for modern GM trucks and SUVs, engineered to speed up and simplify fitment of...

Lisle 57020 is a compact oil filter swivel wrench that securely grips 2.875–3.25 inch filters and turns in tight engine bays. This compact, purpose-built tool combines a stainless-steel band with a textured, permanently bonded coating and a multi-position swivel handle to remove and install...

The Lisle 57030 Standard Oil Filter Swivel Wrench is a stainless-steel band tool that securely grips 3.5–3.875" oil filters and swivels over 180° for access in confined engine bays. The Lisle 57030 combines a durable stainless steel band, a permanently bonded textured coating and...

The Lisle 57010 is a narrow-band, swivel-handled oil and fuel filter wrench that grips 2.375–2.625" filters securely while turning in tight engine spaces. This compact wrench is engineered for small oil and fuel filters where access is limited. A half-inch-wide stainless steel band with...

The Lisle 19752 is a 6-quart translucent polyethylene oil dispenser designed for accurate pouring and easy level checking in workshops and garages. This dispenser combines clear capacity markings with a durable, see-through body so technicians and DIYers can monitor fluid levels without opening the...

Lisle 54200 is a heavy-duty oil filter wrench designed to remove and install large truck filters on Cummins and Detroit Diesel engines with a 4 5/16" to 4 3/4" diameter range. If you work on heavy trucks or fleet equipment, the Lisle 54200 is...

The Lisle 47000 is a handheld windshield locking-strip tool with a 90° swiveling, double-ended tip designed to feed and remove rubber locking strips from glass seals without hacking the frame. Designed for automotive glass technicians and DIYers, the Lisle 47000 simplifies working around tight...

Lisle 18500 is a compact ring compressor designed to snugly compress piston rings for small engine cylinders from 1½" to 3" (38.1–76.2 mm) in a single setting. This hand tool offers a simple, low-cost solution for reinstalling pistons in small engines, lawn equipment, and...

Lisle 35470 is a double-ended, heat-treated alloy steel trim remover with a rounded tip on one end and a narrow square tip on the other for safe prying of car interior panels. Made for technicians and DIYers who need a compact, durable pry tool,...

These Lisle 51420 offset spark plug wire removal pliers are a purpose-built hand tool for safely removing stubborn spark plug boots and wires without tearing or damaging the boot. When spark plug wires are seized, brittle, or hard to reach, using standard pliers risks...

The Lisle 39400 Angled Disconnect Tool Set is a six-piece plastic tool kit designed to safely release air-conditioning and quick-connect fuel line fittings, including the water-sensor fitting on select Duramax and Cummins engines. This compact, angled disconnect set gives technicians and home mechanics a...

The Lisle 81850 is a 9-piece manual brake lining thickness gauge set that delivers fast, repeatable measurements of brake pad wear for accurate service decisions. For technicians and DIY enthusiasts, knowing exact brake lining thickness removes guesswork when assessing pad life. The Lisle 81850...

Lisle 14540 is a specialized extra-long ratchet tool designed to reach and adjust rear-mounted aerodynamic headlight adjusters on Ford vehicles using a 4mm hex and roller-clutch mechanism. If you work on Ford headlights that sit deep in the fender or behind trim, the factory...

The Lisle 37160 Disconnect Pliers are a compact, spring‑action tool made to release fuel and EVAP line fittings that use depressible tabs. This specialized plier helps technicians and DIYers separate quick‑connect fuel and EVAP fittings in tight engine bay or tank access spaces. Its...

The Lisle 44210 Universal Emergency Brake Tool compresses parking brake cable springs with one hand so a technician can hold shoes or levers with the other. Designed for automotive repair professionals and DIYers, this compact specialty tool speeds emergency/parking brake service by freeing one...

Lisle 37300 Fuel and AC Disconnect Pliers are a specialized hand tool that adds leverage to release and reseat quick-connect fuel and air-conditioning lines, especially in tight or hard-to-reach locations. When working on vehicles, removing or reconnecting quick-connect couplings on fuel and A/C lines...

The Lisle 20700 Coil-On-Plug Spark Tester is a handheld tool that lets you safely check ignition coil output on vehicles with coil-on-plug systems without removing coils or spark plugs. When modern engines use coil-on-plug (COP) ignition setups, traditional inductive testers and spark plug wires...

The Lisle 37140 Disconnect Pliers are a low-profile, 45° bent tool designed to release fuel line, EVAP and DEF quick-connect fittings in tight spaces. Mechanics and DIYers often need a compact, reliable tool to access quick-disconnect fittings located under or beside vehicle components. The...

Lisle 39100 is a two-piece Ford transmission oil cooler line disconnect kit (3/8" and 1/2") built to release stepped-style quick-connect fittings quickly and safely. When servicing Ford transmission oil coolers, having the right disconnect tool prevents damage to fittings and saves time. The Lisle...

Compact hand tool that guides 1/8" rope into the windshield gasket groove so replacement or reseating is fast and consistent. The Lisle 83660 Gasket Rope Insert Tool in red is built to help installers and DIYers tuck gasket rope neatly under the lip and...

The Lisle 12390 Dual Drive Oxygen Sensor Wrench is a heavy-duty, slotted socket tool that accepts both 1/2" and 3/8" drives to remove and install oxygen sensors protected by heat shields. Designed for automotive technicians and DIY mechanics who encounter stubborn oxygen sensors, this...

Lisle 39650 is a 39mm, 12-point axle nut socket built to remove and install axle nuts on Toyota and Lexus 4WD hubs where standard sockets fail. This deep, impact-grade socket is engineered to reach recessed axle nuts on many Toyota and Lexus SUV and...

Lisle 35240 is a specialized window belt molding removal tool engineered to lift and release door moldings cleanly without harming paint or trim. Removing belt moldings on modern vehicles can be tricky: clips are hidden, plastic tabs are fragile, and prying with the wrong...

The Lisle 64970 Parasitic Drain Tester is a handheld adapter that makes it simple to connect a multimeter to a vehicle's electrical circuit so you can locate and diagnose hidden battery drain. If a car battery discharges overnight or the vehicle won't hold charge,...

Lisle 50240 Magnetic Funnel Holder is a translucent, magnet-mounted storage cradle that keeps funnels upright and drains residual fluids into a 12 oz. reservoir for a cleaner workspace. This compact polypropylene holder uses two powerful neodymium magnets to attach securely to ferrous metal surfaces...

The Lisle 34750 Low Profile Fuel Line Disconnect Set is a compact tool kit designed to release quick-connect fuel fittings in tight engine compartments for many GM, Ford and Chrysler vehicles. When fuel lines are tucked behind intake manifolds, rails, or other obstructions, standard...

The Lisle 19732 is a 6-quart translucent polyethylene oil dispenser with a flexible 8" pouring spout that makes measuring and transferring fluids effortless. This compact utility container is built for mechanics, DIYers, and workshop pros who need a clear, accurate way to store and...

Lisle 48600 is an offset windshield locking strip tool with a double-ended, 90° swivel tip designed to access and secure rubber locking strips on windshields and other glass in tight spaces. This compact hand tool combines an offset handle and two versatile ends so...

The Lisle 49000 is a 3/4" extra-deep socket engineered to free truck air brake cage bolts and remove air brake boosters quickly and safely. When servicing heavy-duty air brakes, access and torque tools must match the job. The Lisle 49000 was designed specifically for...

Lisle 37960 Electrical Disconnect Pliers are an 8" hand tool designed to release locking push-tab electrical connectors quickly and safely with one hand. If you routinely service sensors and electrical connectors on vehicles, this plier-style disconnect tool simplifies removing push-tab style plugs used on...