-
Vendor:GEAROLL
GEAROLL Lower Control Arm Prying Tool — Lower Ball Joint Pry, 1/2" Drive Compatible, Hardened Steel
GEAROLL's Lower Control Arm Prying Tool is a heavy-duty steel lever that separates lower ball joints and pries down control arms safely, compatible with a 1/2" drive extension or breaker bar. This suspension specialty arm lever is built for technicians and DIYers who need...- $54.60
- $54.60
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Inner Axle Side Seal Installation Tool for Dana 30/44/60 — CNC‑Machined Heavy Steel, Electroplated
GEAROLL's Inner Axle Side Seal Installation Tool is a heavy‑duty, CNC‑machined installer designed to seat and remove inner axle side seals for Dana 30, 44, and 60 front differentials quickly and accurately. If you service GM, Ford, Dodge, Jeep or GMC front axles that...- $64.76
- $64.76
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Flywheel Puller Tool for Polaris – 50mm x 1.5mm LH Extractor, Hardened Steel
GEAROLL Flywheel Puller Tool is a 50mm diameter, 1.5mm left-hand threaded extractor made to remove Polaris flywheels and rotors cleanly and safely. This precision puller is engineered specifically for a wide range of Polaris ATVs and UTVs — including Ranger, RZR, Sportsman and ACE...- $58.77
- $58.77
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Spark Plug Gap Tool – Adjustable 32-Blade Feeler Gauge, Fits 10/12/14/16mm Threads, Black
GEAROLL’s spark plug gap tool is an adjustable gapping device with a 32-blade steel feeler gauge that sets plug gaps for most 10mm, 12mm, 14mm and 16mm threaded spark plugs quickly and accurately. Designed to make routine ignition tuning faster and more reliable, this...- $56.69
- $56.69
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Spark Plug Gap Tool Kit with 32-Blade Steel Feeler Gauge — Red, Fits 10/12/14/16mm Threads, Precision Screw Clamp
The GEAROLL Spark Plug Gap Tool Kit is a handheld gapping device with a 32-blade steel feeler gauge that quickly and accurately sets spark plug gaps for most 10mm, 12mm, 14mm and 16mm threaded plugs. Whether you tune a motorcycle, lawn mower, ATV or...- $56.69
- $56.69
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Harmonic Balancer Installation Tool 66515 — SBC & BBC Threaded Ends (5/8-16, 7/16-16), Thrust Bearing
GEAROLL 66515 is a heavy-duty harmonic balancer installation kit designed to safely and accurately press SBC and BBC Chevy balancers onto crankshafts using 5/8-16 and 7/16-16 threaded ends. This installer kit provides a straightforward, mechanical way to fit harmonic balancers without risking crank or...- $60.86
- $60.86
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Spark Plug Gap Tool — Blue knob gapper with 32-blade steel feeler gauge for 10/12/14/16mm plugs, precise adjustment
GEAROLL Spark Plug Gap Tool is a compact, hand-operated gapping and measuring kit that lets you set accurate spark plug electrode distances for most 10mm, 12mm, 14mm and 16mm threaded plugs. Whether you tune a motorcycle, car, lawnmower or small engine, correct spark plug...- $56.69
- $56.69
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Oil Filter Cutter Tool, Adjustable 2-3/8–5 in with Vise Jaw Plate — Black, Anodized Aluminum
GEAROLL 77750 is a heavy-duty oil filter cutting tool with an adjustable vise jaw plate that cleanly opens canister filters from 2-3/8" to 5" for inspection and recycling. This compact workshop tool is designed to let mechanics, DIY enthusiasts, and recyclers slice open used...- $56.69
- $56.69
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL oil filter cutter 2-3/8"–5" (Blue) — heavy-duty anodized aluminum with vise jaw plate
The GEAROLL 77750 is a heavy-duty oil filter cutter that opens metal cartridge filters 2-3/8" to 5" in diameter for inspection and recycling. The GEAROLL 77750 oil filter cutter is built to split old oil filters cleanly so you can examine the media, recover...- $56.69
- $56.69
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Oil Filter Cutter 2-3/8"–5" (Red) — Vise Jaw Plate, Anodized Aluminum for Precise Cuts
The GEAROLL 77750 is a heavy-duty oil filter cutter that cleanly slices open spin-on filters 2-3/8" to 5" in diameter for element inspection and metal recycling. Whether you inspect used filters to check engine wear, separate oil from metal for recycling, or simply need...- $56.69
- $56.69
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Rear Axle Bearing Puller Set — 3‑Piece Extractor Kit, 45# Steel, Fits 1"–2.875" IDs
GEAROLL Rear Axle Bearing Puller Tool Set is a three-piece extractor kit designed to remove semi‑floating rear axle bearings quickly and without damaging bearing housings. If you service domestic vehicles with semi‑floating rear axles, this GEAROLL kit bundles three sized pullers that match the...- $75.47
- $75.47
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Wheel Alignment Pins 10PC Set — Multi-Thread Steel Alloy M12/M14/M15, Machined Threads for Fast Wheel Mounting
GEAROLL 10PC Wheel Alignment Pin set is a multi-threaded steel-alloy guide kit that holds wheels in place while you remove or install lug bolts, making wheel mounting faster and safer. When changing tires or servicing brakes, keeping the wheel steady while you position lug...- $67.12
- $67.12
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL X3 Belt Changing Tool for Can‑Am Maverick X3 (2017–2023) — 64/72" Wheelbase, Aluminum Textured Grip
GEAROLL X3 Belt Changing Tool is a compact aluminum clutch removal and installation kit designed to speed up belt service on 2017–2023 Can‑Am Maverick X3 models with 64" or 72" wheelbase. This toolset is built specifically for Maverick X3, X3 MAX, RS, DS, MR,...- $67.12
- $67.12
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Pulley Holder Tool Kit, 15-Piece Adjustable Pin Spanner Wrench — 1/2" Drive, 32–127 mm
GEAROLL's 15-piece pulley holder kit is a universal, adjustable pin spanner system that secures camshaft and crankshaft pulleys, fan clutches and harmonic balancers while attaching to a 1/2" drive for extra leverage. This compact kit supplies a selection of hardened steel pins, two wrench...- $79.64
- $79.64
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Lower Control Arm Pry Tool Kit — 1/2" Drive, 2 Adapters, Low-Profile SCM440 Steel
GEAROLL Lower Control Arm Prying Tool Kit is a heavy-duty suspension lever and two pry bar wrench adapters engineered to separate lower ball joints safely and access tight suspension spaces using a 1/2" drive extension or breaker bar. If you work on front-wheel drive...- $71.29
- $71.29
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Universal Automatic Clutch Drum Spring Compressor T-0158-HD 6" Legs Heavy-Duty Steel
The GEAROLL T-0158-HD is a heavy‑duty universal clutch drum spring compressor that safely compresses transmission return springs so you can remove and install snap rings on most clutch drums up to 6". If you work on automatic transmissions for Ford, Chrysler, GM or other...- $96.31
- $96.31
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Turbo Engine Timing Tool Kit for 1.0–1.4L Chevy Vauxhall Opel — Camshaft & Crankshaft Locking, Tensioner Pins
GEAROLL Turbo Engine Timing Tool Kit is a complete camshaft and crankshaft locking set engineered to hold timing components securely during timing-chain service on 1.0–1.4L Chevy, Vauxhall and Opel engines. When you need to change a timing chain, replace sprockets, or service sensors, precise...- $83.81
- $83.81
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Harmonic Balancer Installer Kit 5-Piece — Long-Reach Adapters, Thrust Bearing for V6/V8 Ford GM Dodge Chrysler
GEAROLL's 5-piece harmonic balancer installer kit is a heavy-duty, long-reach tool set designed to fit V6 and V8 Ford, GM, Dodge and Chrysler engines for smooth, accurate crank pulley and underdrive damper installation. When replacing or installing a harmonic balancer, crank pulley, or underdrive...- $85.90
- $85.90
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Harmonic Balancer Puller Kit — Adjustable 3-Jaw Extractor, Black Oxide Heavy-Duty Set (Includes Forcing Rods & Case)
GEAROLL's adjustable 3-jaw harmonic balancer puller kit is a heavy-duty, reversible extractor set designed to remove pressed-on harmonic dampers quickly and without dismantling surrounding engine components. When a harmonic balancer or damper needs to come off, having the right puller saves time and prevents...- $96.33
- $96.33
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Bearing Press Kit — 10pc Race & Seal Driver Set with 9 Aluminum Adapters, Handle
The GEAROLL 10-piece Bearing Race and Seal Driver Kit provides nine aluminum adapters, a durable handle, gloves and a compact case to correctly seat bearing races and seals without damaging hubs. This kit is built for wheel bearing jobs that require even, controlled impact...- $87.99
- $87.99
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL U-Joint Puller Universal Joint Extractor 10105 — 1/2" Wrench Adapter, Heavy-Duty Steel (1.00"–1.25" Cups)
GEAROLL U Joint Puller 10105 is a heavy-duty universal extractor designed to remove U-joint bearing cups, seals, and related parts from trucks and cars with controlled, wrench-driven force. If you're servicing driveline components or tackling stubborn bearing cups, the GEAROLL 10105 U-joint puller gives...- $98.19
- $98.19
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Harmonic Balancer Puller Installer Kit — Adjustable 3-Jaw Set, Black Oxide Steel with Multiple Jaws & Forcing Rods
GEAROLL Harmonic Balancer Puller Installer Kit is an adjustable 3-jaw puller and installer set engineered to remove and install pressed-on harmonic dampers on a wide range of GM, Ford, Chrysler and other vehicle engines. This all-in-one kit brings the key components technicians and DIY...- $108.85
- $108.85
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Cam Timing Tool Kit for Cummins ISX QSX X15 — 7mm Jake-brake Gauge, 4/5/6/7° Wedges & Crank Pin
GEAROLL's 3163021 cam timing tool kit with the 7mm engine-brake adjustment gauge is a complete set for accurately setting cam gear timing and adjusting Jake brake screws on Cummins ISX, QSX and X15 engines. When working on 2007–2017 Cummins engines you need a reliable...- $117.20
- $117.20
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL pneumatic fan clutch wrench kit — 8-piece air-hammer compatible set with 7 drivers and molded case
GEAROLL 43300 is an 8-piece pneumatic fan clutch removal kit that uses an air hammer and interchangeable driving wrenches to quickly free fan clutches on many Ford, GM, Chrysler and Jeep engines. This compact kit is built for technicians and DIYers who need a...- $110.94
- $110.94
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Gear Puller Set — 3in & 7in Reversible 2/3-Jaw Kit, Heat-Treated Steel for Gears, Bearings, Pulleys
GEAROLL Gear Puller Set is a two-piece 3" and 7" reversible 2- or 3-jaw puller kit engineered to remove gears, bearings, pulleys and flywheels safely and quickly. Whether you're a home mechanic, a small auto shop owner or a DIY enthusiast, the GEAROLL set...- $117.20
- $117.20
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Rear Axle Bearing Puller Kit — Slide Hammer, 1"–2-7/8" ID Adapters, Heat-Treated Steel
GEAROLL Rear Axle Bearing Remove Puller Tool Kit is a complete slide-hammer and adapter set designed to extract semi‑floating axle bearings and threaded parts from 1" to 2‑7/8" inner diameters safely and with controlled impact. This professional-grade puller kit combines a slide hammer, a...- $123.46
- $123.46
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Brake Line Flaring Tool Kit 3/16-1/4 Dual-Size, 45-degree Single & Double Flares, Carbon-Steel
The GEAROLL Brake Line Flaring Tool Kit is a complete dual-size kit that makes reliable 45° single, double and bubble flares on 3/16" and 1/4" copper, aluminum and nickel-copper brake and hydraulic tubing. If you service vehicle brake or hydraulic lines, this kit combines...- $106.76
- $106.76
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Truck Hub Seal Installer Kit — 5-Size Aluminum Drivers with Extensions & Case for Class 7/8 Trucks — CNC Precision, Damage
GEAROLL Truck Hub Seal Installer Kit is a five-size aluminum driver set with extensions and a blow-molded case for safe, damage-free installation of hub seals on Class 7 and Class 8 trucks. This heavy-duty seal driver set is built for professional technicians and fleet...- $171.45
- $171.45
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Locking Pliers Slide Hammer Puller Set — 9.8in Pliers, 2 lb Hammer with Quick-Release Swivel
The GEAROLL Locking Pliers Slide Hammer Puller Set is a dual-purpose extraction tool combining a 9.8-inch locking plier and a 2 lb slide hammer for turning, pulling, and removing stubborn fasteners, pins, nails, seals and bodywork without excessive force. This two-piece kit pairs a...- $125.54
- $125.54
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Bearing Press Kit — 43-Piece Race & Seal Driver Set, Aluminum Adapters & Carry Case
GEAROLL's 43-piece Bearing Press Kit is a complete aluminum bearing race, seal driver and adapter set designed to press bearings and seals evenly without damaging components. This professional-grade kit bundles a wide range of metric and SAE adapters, four heavy-duty handles, a sturdy carrying...- $158.93
- $158.93
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Camshaft Phaser Timing Chain Lock Tool Kit for Chrysler 3.6L Pentastar V6 — Complete OEM-style timing set with case
GEAROLL's Camshaft Phaser Timing Chain Lock Tool Kit is a complete, portable timing tool set designed to lock cam phasers, hold camshafts and secure the crankshaft on Chrysler, Jeep, Dodge and VW 3.6L Pentastar V6 engines. This kit gathers every specialized tool needed to...- $150.58
- $150.58
- Unit price
- per
-
Vendor:GEAROLL
GEAROLL Heavy-Duty Yoke Puller Kit for Class 6-8 Trucks, fits 1-7/8 to 2-3/16 in bearings, 1-inch impact ready
The GEAROLL 10803 / 60050 Heavy-Duty Yoke Puller Kit is a commercial-grade yoke and bearing removal set built to extract sealed yokes on Class 6–8 trucks reliably using a 1" impact tool. This professional yoke removal kit was engineered for fleet and heavy-equipment technicians...- $192.31
- $192.31
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.