DPTOOL

DPTOOL oil drain plug 8-pack replaces OEM-style plugs for select Ford and Lincoln models and includes a 3/8" drive removal/install handle and adapter for easier oil changes. These replacement oil drain plugs are engineered to fit a wide range of Ford and Lincoln engines,...

DPTOOL Fuel Pump Lock Ring Removal and Reinstall Tool is a heavy-duty, adjustable three-arm wrench designed to remove and reinstall fuel pump locking rings ranging from 5.2" to 7.6" without hammering or damaging the pump assembly. If you service fuel pumps or replace in-tank...

DPTOOL's two-piece 32mm/36mm fan clutch nut wrench and water pump pulley holder is a heavy-duty timing tool designed to securely hold BMW water pump pulleys and remove thermo-viscous fan locknuts with precision. If you work on BMW engines that use temperature-dependent viscous fans, this...

DPTOOL Fuel Injector Remove Tool is a durable slide-hammer puller engineered to extract stuck injectors from BMW N14, N18, N20, N26, N53, N54, N55, N63 and S63 engines safely and efficiently. This precision-engineered puller gives professional mechanics and experienced DIYers a controlled, non-destructive way...

DPTOOL Fuel Tank Lock Ring Tool is a heavy-duty, steel removal and installation kit engineered to open and secure fuel pump sender lock rings quickly and safely without hammers or prying. Designed for professional mechanics and DIY auto owners, this tool set fits a...

The DPTOOL 12mm back tap spark plug thread repair tool (M12x1.25) safely restores damaged spark plug threads without removing the cylinder head. If a spark plug hole has been cross-threaded, stripped, or worn, this M12x1.25 thread chaser is built to recut and clean the...

DPTOOL 14mm Back Tap Spark Plug Thread Repair Tool M14x1.25 is a heavy-duty thread chaser designed to restore damaged spark plug threads from the combustion chamber side without removing the cylinder head. If a spark plug thread is cross-threaded or partially stripped, this M14x1.25...

DPTOOL's 7-piece low profile oil filter socket set is a compact, 6-point canister-cap wrench kit designed to remove and install cartridge-style oil filter housings on a wide range of vehicles. This kit brings seven commonly used socket sizes in a compact, low-profile design so...

DPTOOL Power Steering Pump Pulley Puller Remove Install Tool is a complete, heavy-duty kit built to safely remove and install power steering pump pulleys on a wide range of domestic and import vehicles. This puller and installer set gives mechanics and DIYers the parts...

DPTOOL's 10mm back tap is a heavy-duty M10x1.0 thread chaser designed to restore damaged spark plug threads quickly and without removing the cylinder head. If a spark plug thread in an aluminum or steel cylinder head has been cross‑chased, overtightened, or partially stripped, this...

DPTOOL Fuel Tank Lid Wrench is a 9-slot lock-ring removal and installation tool designed to fit Toyota and Lexus fuel pump retaining rings for a secure, slip-resistant grip. This precision-made tool is built to remove and install fuel pump lock rings on many Toyota...

DPTOOL Engine Timing Tool Kit is a complete camshaft and timing-chain locking set designed to safely align and hold the 3.6L Pentastar VVT engine during service on compatible 2011–2019 Chrysler, Jeep and Dodge vehicles. This precision kit contains the specialized fixtures technicians use to...

The DPTOOL Engine Timing Tool Set is a complete, precision-made kit for locking and aligning Fiat/Alfa/Jeep 1.4 Multiair engines during timing service or belt replacement. Designed specifically for 1.4 Multiair engines found across Alfa Romeo, Fiat, Lancia, Jeep and Dodge models, this set groups...

DPTOOL's 6-piece L-type diesel injector line socket wrench set is a compact, hardened 1/2"-drive toolkit made to reach tight fuel injector fittings and remove or reinstall diesel fuel lines with reduced slipping and damage. When you're working on diesel engines, injector fittings sit in...

DPTOOL Engine Timing Tool Kit is a dedicated camshaft and crankshaft alignment set engineered to accurately lock, check, and set timing on GM 1.0 / 1.2 / 1.4 petrol engines from 2009–2020. This compact alloy and steel tool kit provides the fixtures technicians and...

DPTOOL Fuel Tank Locking Ring Remover Tool is a 1/2" square-drive wrench designed to remove and install fuel sender retaining rings on many VW, Audi and Porsche models. If you work on fuel pumps or perform fuel-sender service, using the right ring tool saves...

DPTOOL Heater Fan Blower Remove Install Tool for Volvo and Land Rover is a precision puller and installer engineered to remove and fit the heater/blower motor assembly to OEM 9997284 specifications. This specialty tool reproduces factory dimensions so technicians and experienced DIYers can extract...

DPTOOL Noid Light Test Kit is an electrical diagnostic kit that quickly tells you whether fuel injectors and idle air control circuits are receiving the correct pulse signal from the vehicle computer. When an engine runs poorly, the problem can be electrical rather than...

DPTOOL 303-1248 is a specialist camshaft holding and timing alignment kit made to lock and position Ford 3.5L and 3.7L Cyclone V6 camshafts for accurate service work. If you need to service or replace timing components on Ford Edge, Explorer, F‑150, Fusion, Mustang or...

DPTOOL's 15-piece tensioner and idler pulley removal kit is a compact, steel-built set engineered to access and release serpentine and timing-belt tensioners in tight engine bays. This all-in-one kit brings a curved tensioner wrench, a 48 mm adapter, ten hex and dodecagonal adapters, and...

DPTOOL's 14mm back-tap spark plug thread repair kit restores damaged M14x1.25 spark plug threads quickly without removing the cylinder head. When a spark plug thread is cross‑threaded or partially stripped, replacing the cylinder head or using time‑consuming inserts isn't always necessary. The DPTOOL 14mm...

DPTOOL 8pc Strut Nut Socket set is a heavy-duty 12-point 1/2" drive kit designed to remove and install front suspension strut nuts and to spread strut mounts safely without cutting or damaging wiring harnesses. This professional-grade set bundles six closed, side-slotted strut nut sockets...

DPTOOL Engine Timing Tool Kit for Ford 2.0T/2.3T locks and aligns camshafts and crankshaft components so you can set engine timing accurately on compatible Ford, Jaguar and Land Rover petrol engines. This professional-grade timing kit is engineered for 2.0L Duratec and 2.0–2.3L EcoBoost engines...

DPTOOL Harmonic Balancer Damper Pulley Puller Remove Extractor Kit is a versatile 6-jaw tool set built to extract hard-to-reach engine dampers and pulleys across many GM, Ford, Mitsubishi and other vehicle models without removing the radiator. This professional-grade pulley puller kit combines three thicker...

DPTOOL Engine Timing Tool Kit is a complete camshaft, crankshaft and flywheel locking set made to accurately set timing on GM 2.8–4.2 engines. This professional-grade timing tool kit consolidates the specialized locking and holding fittings technicians need to align and secure camshafts, crankshafts and...

DPTOOL Engine Timing Tool Kit for GM Ecotec 2.0 / 2.4 is a complete 15-piece set designed to lock camshafts, hold the water pump sprocket, and set chain tension so you can accurately service timing components on compatible GM engines. This precision kit gathers...

DPTOOL Engine Timing Tool Kit for GM Chrysler 2.8L Diesel Duramax is a precision locking set that secures camshafts, crankshaft, and diesel pump components to accurately set or maintain base engine timing. When working on 2.8L Duramax engines found in Jeep, Chrysler and related...

DPTOOL 23Pc Pneumatic Brake Caliper Compression Tool Kit is a compressed-air powered set that safely and quickly pushes back brake pistons and resets calipers for pad replacement. This compact kit combines a pneumatic pump with 22 purpose-made adapters so you can return single or...

DPTOOL Valve Pressure Spring Installer Remover for BMW 117110 is a rugged, high-precision tool engineered to remove and install valvetronic valve springs on BMW N-series engines without harming the cylinder head. This professional-grade tool is built specifically to fit BMW engine families including N13,...

DPTOOL Spark Plug Thread Chaser Kit is an 8-piece automotive thread rethreading set designed to quickly restore damaged spark plug and oxygen sensor threads without replacing cylinder heads. If a spark plug or oxygen sensor thread is stripped, cross-threaded, or corroded, the DPTOOL Thread...

DPTOOL Lug Nut Socket Set is a 1/2" drive, thin-wall flip socket kit that removes expanded, rounded, or stuck wheel nuts while protecting alloy rims. This compact flip-socket collection combines half-size thin-wall design, SAE and metric coverage, and a protective non-marring sleeve to tackle...

DPTOOL Spindle Nut Socket Tool Kit is a 6-piece 1/2" drive axle lock nut socket set designed to remove and install spindle and hub locknuts on most 4WD SUVs and light trucks. This professional-grade socket kit provides a focused set of sizes and tools...

DPTOOL Camshaft Timing Tool Kit is a complete, precision-engineered set designed to lock, align and hold components when servicing the 4.0L 4015CC SOHC 12V V6 engines found in Ford and Land Rover models from 2004–2010. When you're doing a timing job on a Ford...

DPTOOL Fuel Injector Rail Assembly Remover Tool Kit & Seal Installer GM245 is a complete metal toolset engineered to remove direct-injection fuel rails safely and fit replacement Teflon O-ring seals on a range of GM, Subaru and other engines. This professional-grade kit combines a...

DPTOOL Engine Timing Tool Kit is a complete, vehicle-specific set that locks and aligns camshafts and crankshafts for Ford 1.5T/1.6T/2.0T/2.3T Ecoboost, select Volvo T4/T5 and Land Rover/Jaguar 2.0 GTDi/Si4 engines. This professional-grade timing tool kit provides the fittings and locking pins required to safely...

DPTOOL Fuel Injector Puller Removal Tool and Injector Seal Replace Install Kit is a complete steel tool set for removing and installing fuel injectors and seals on many BMW engines. This kit combines three injector pullers, a slide-hammer puller, and multiple seal-installing adaptors in...

DPTOOL EA888 1.8/2.0 TSi TFSi Engine Timing Tool Kit is a full professional set of alignment, locking, and installation tools designed to accurately time and service VW and Audi EA888 1.8/2.0 TSi/TFSi engines from 2006–2018. This DPTOOL kit gathers the specialized fixtures technicians need...

DPTOOL Engine Timing Tool Kit is a complete camshaft and crankshaft locking set purpose-built to safely time BMW MINI Cooper engines N12, N13, N14, N16 and N18 during belt or chain service. If you're doing valve timing, replacing a timing belt or performing head...

DPTOOL Fuel Injector Puller Remover and Seal Installer is a dedicated slide-hammer toolset engineered to safely extract stubborn injectors and press-fit new Teflon seals on Land Rover and Jaguar 3.0L and 5.0L petrol engines. If you work on Jaguar X150, XK Series, X250 (XF),...

DPTOOL Air Conditioner Clutch Installer Tool is a complete remove-and-install kit that holds and secures AC compressor clutches so you can safely remove, shim, and reinstall clutch plates without replacing the entire compressor. Whether you're a DIY mechanic or a professional technician, this DPTOOL...

DPTOOL Harmonic Balancer Puller Removal & Install Tool Kit is a complete steel puller and installer set designed to safely extract and reinstall crankshaft pulleys, harmonic balancers, and flywheels with minimal effort and no engine damage. Whether you're a home mechanic or a professional...

DPTOOL 3.6 Pentastar Timing Tool Kit is a full, vehicle-specific set of camshaft phaser locks, chain holders and crankshaft tools designed to correctly secure timing components on 3.6L Pentastar V6 engines from 2011–2019. This professional-grade kit groups every specialized fixture needed to service timing...

DPTOOL Engine Camshaft Timing Tool Kit EN-51367 is a dedicated alignment and positioning set that lets you lock and set camshafts on GM 1.0L, 1.4L and 1.5T engines without removing the timing cover. This precision tool kit contains the camshaft alignment pins and positioning...

DPTOOL Camshaft Locking Tool Engine Timing Set secures and aligns BMW camshafts and crankshaft for precise timing chain replacement and maintenance. If you work on post-2014 BMW and Mini engines (including B37, B38, B48 and B58 families), this comprehensive DPTOOL timing kit gives technicians...

DPTOOL's 28-piece Universal Pneumatic Diesel Fuel Injector Puller Kit is a complete air-hammer system with conversion adapters that helps remove stuck diesel injectors quickly and safely. This professional-grade kit pairs a pneumatic hammer with 20 conversion screws and accessories to tackle injectors from many...

DPTOOL 10259B is a dedicated removal and spring-compression tool engineered to safely extract and tension variable valve actuator assemblies on Fiat/Chrysler Multiair and Uniair engines. This specialty workshop tool is designed for mechanics and experienced DIYers who work on 1.4L Multiair 16V, 2.0L, and...

DPTOOL's crankshaft pulley removal and installation kit is a complete, heavy-duty toolset designed to remove and fit the front crankshaft vibration damper on Jaguar and Land Rover 3.0L V6 and 5.0L V8 petrol engines safely and without damage. This purpose-built kit replaces the need...

DPTOOL Turbo System Leakage Tester Kit is a 19-piece workshop tool that pressurizes turbo hoses, intercoolers and cooling pipes to locate and diagnose boost leaks quickly and accurately. Built for garages and DIY mechanics, this comprehensive kit lets you isolate sections of the turbocharging...

DPTOOL Double Vanos Twin Camshaft Timing Tool Kit is a complete alignment and locking set built to hold camshafts, crankshaft, VANOS and timing chain components in correct position during service on BMW M52, M52TU, M54 and M56 engines. When you remove or reinstall timing...

The DPTOOL EN-51146 is a specialized fuel injector and rail removal tool engineered to extract injectors from GM 1.0L–1.6L SGE-family engines safely and without damage. Designed for technicians and DIYers working on GM small-displacement engines, this puller kit fits a broad range of Chevrolet...