DPTOOL 8pc Strut Nut Socket Set 16–24mm with 12-Point 1/2" Drive & Strut Spreader — Hardened Steel, Side-Slotted

DPTOOL 8pc Strut Nut Socket set is a heavy-duty 12-point 1/2" drive kit designed to remove and install front suspension strut nuts and to spread strut mounts safely without cutting or damaging wiring harnesses.

This professional-grade set bundles six closed, side-slotted strut nut sockets (16mm, 18mm, 19mm, 21mm, 22mm, 24mm) together with two suspension strut spreader sockets for common passenger vehicles. Each socket features a 12-point pattern and a 1/2" square drive, sized and shaped to clear electromagnetic wiring and other obstructions on modern struts. The set is forged from hard steel and chrome-vanadium components for durability, and it ships with a 12-month warranty for peace of mind.

Which fasteners does this set work with on my car?

The kit covers the most frequent strut nut sizes found on many cars and light trucks: 16, 18, 19, 21, 22 and 24 millimeters. The 12-point profile gives more engagement points for turning nuts in tight spaces, while the side openings allow the socket to pass over wiring harnesses and sensor leads without cutting them.

• Fits common front strut nuts 16–24mm
• 12-point design for better bite on rounded or corroded nuts
• Side slots accommodate wiring harnesses and sensor cables
• Use with a 1/2" drive ratchet or breaker bar

How does the strut spreader socket help when replacing struts?

The included suspension strut spreader sockets let you separate strut components and remove the strut assembly from the front axle without deforming the mount or adjacent parts. Their specific head sizes are made to push the spreader arms apart cleanly so you can extract or install the strut unit more easily.

• Two spreader head sizes: 5×8mm and 4.5×6.5mm for different spreader pins
• Makes removing the strut from the spindle faster and safer
• Designed to avoid hammering on fragile sensor wiring
• Works with common mechanic’s hand tools and impact wrenches

Are these sockets robust enough for repeated shop use?

Yes — sockets are made from high-strength hardened steel while the spreader sockets use chrome-vanadium steel for added toughness and wear resistance. The construction reduces bending or mushrooming under typical shop torque loads so the tools remain reliable over time.

• Durable hard steel socket bodies resist deformation
• Chrome-vanadium spreader sockets for impact compatibility
• 12-point geometry helps distribute force evenly across fasteners
• Rated torque guidance: approximately 40–45 Nm for appropriate fastener sizes

What should I expect from setup, fit, and warranty?

Each socket measures about 3.1 inches in length with a 1/2" drive slot to fit standard ratchets. The open-side slots fit around harnesses so you rarely need to disconnect electronics. DPTOOL backs the kit with a 12-month warranty: tooling defects are eligible for replacement or refund under the stated policy.

• Socket length: ~3.1 inches for reach and clearance
• Drive: 1/2" square for common ratchets and breaker bars
• Easy to use without cutting sensor wires or harnesses
• 12 months warranty for manufacturer defects

Who this kit is for: mechanics, mobile technicians and DIY enthusiasts who service front strut assemblies and want a compact, purpose-made set to remove and replace strut nuts without damaging wiring or mounts. If you frequently work on suspension jobs or need a reliable backup set for shop work, the DPTOOL 8pc strut nut socket kit provides the range, strength and clearance features you’ll use most often.