-
Vendor:Lisle
Lisle Shaft-In Seal Puller 58430 — compact camshaft & crankshaft seal remover, adjustable hook
The Lisle 58430 Shaft-In Seal Puller cleanly extracts camshaft and crankshaft seals without harming the shaft surface. When service calls for removing shaft-mounted seals in tight engine bays, a tool that grips securely and pulls straight is essential. The Lisle 58430 is a purpose-built...- $62.95
- $62.95
- Unit price
- per
-
Vendor:Lisle
Lisle Ring Compressor spring-style piston ring compressor 19500 — compact, non-damaging installation
The Lisle 19500 Ring Compressor is a spring-style tool that safely compresses piston rings for easy cylinder installation without damaging rings or pistons. When rebuilding engines or replacing pistons, controlling piston rings during insertion is critical. The Lisle 19500 offers a simple, spring-clamp design...- $64.37
- $64.37
- Unit price
- per
-
Vendor:Lisle
Lisle CV Boot Clamp Pliers 30500 — Earless (Crimp) Clamp Tool, Compact Durable
The Lisle 30500 CV Boot Clamp Plier is a rugged, affordable hand tool designed to install and remove earless-style CV boot clamps—commonly used on GM inboard CV joints—quickly and without damaging the boot. This compact plier focuses on simple, dependable performance for mechanics and...- $70.15
- $70.15
- Unit price
- per
-
Vendor:Lisle
Lisle Connector Pliers 37990 8" — Slim Knurled-Tip, Forged Carbon Steel for One-Handed Connector Release
The Lisle 37990 Connector Pliers are an 8" forged-carbon-steel tool engineered to quickly and safely release single and double electrical connectors in tight engine-bay spaces. When working on wiring harnesses, fuel lines or sensor plugs, grabbing and disengaging stubborn connectors can slow a job...- $64.99
- $64.99
- Unit price
- per
-
Vendor:Lisle
Lisle Electrical Disconnect Pliers 37980 60° Angle — Hooked Tip & Spring-Return Grips
Lisle 37980 Electrical Disconnect Pliers are a 60° angled hand tool designed to release locking push-tab electrical connectors safely and quickly in tight engine compartments. Built for technicians and DIY mechanics, these pliers combine an offset tip, a hooked release point and spring action...- $66.04
- $66.04
- Unit price
- per
-
Vendor:Lisle
Lisle Adjustable Seal Puller 56650 — 5‑Position Pivoting Head, Two Hook Sizes for Tight Engine Bays
The Lisle 56650 Adjustable Seal Puller is a five-position, two-hook tool that lets you extract oil and grease seals in confined areas without major disassembly. Designed for mechanics and DIYers who work on modern front-wheel-drive vehicles and tight engine bays, this compact seal puller...- $67.12
- $67.12
- Unit price
- per
-
Vendor:Lisle
Lisle in-line spark tester 20580 — 7" extension for coil-on-plug, live engine testing
Lisle 20580 is a handheld in-line ignition tester that lets you safely observe a live spark between the plug and wire, with a 7" extension for recessed coil-on-plug applications. The Lisle 20580 in-line spark tester is a compact diagnostic tool designed to help mechanics...- $70.31
- $70.31
- Unit price
- per
-
Vendor:Lisle
Lisle Emergency Brake Cable Release Tool 44220 — 14.5in Compact Reach for Rear Drum & Disc Brakes
Lisle 44220 is a compact hand tool designed to push the rear emergency brake cable out of its connector quickly and safely so you can service or replace rear brake components. When you need to work on rear drum or disc parking brake systems,...- $71.79
- $71.79
- Unit price
- per
-
Vendor:Lisle
Lisle Fender Cover – 89880 Red Heavy-Duty Nylon Protector with Non-Slip Backing, Machine-Washable
The Lisle 89880 Red Fender Cover is a heavy-duty nylon protective pad that shields vehicle paintwork while you work, with a non-slip rubber backing and grease-, oil- and water-resistant finish. When you need a reliable surface between tools, parts or a technician and your...- $72.21
- $72.21
- Unit price
- per
-
Vendor:Lisle
Lisle IPR Socket for Ford 6.0L Diesel, 3/8" Drive — Black, Bottoming Design Prevents Connector Damage
The Lisle 68210 IPR Socket is a purpose-built 3/8" drive tool that safely removes and installs the injector pressure regulator (IPR) on Ford 6.0L, International and compatible diesel engines without stressing the electrical connector. The IPR sits in a confined area on many diesel...- $72.94
- $72.94
- Unit price
- per
-
Vendor:Lisle
Lisle Torx Plus Bolt Driver Set — 9-Piece Kit (TP-10 to TP-50) with 1/4" & 3/8" Drives for GM & Ford
Lisle 81000 is a nine-piece Torx Plus bolt driver set engineered for common automotive fasteners, providing the correct Torx Plus sizes and drives for reliable access to GM and Ford hardware. This compact kit gathers the most frequently used Torx Plus sizes for vehicle...- $81.29
- $81.29
- Unit price
- per
-
Vendor:Lisle
Lisle idler pulley plug and gasket kit, 5-piece oversize thread repair — fits 13–19mm, 3/8" & 1/2" drives
Lisle 58650 is a five-piece plug and gasket repair kit designed to restore damaged idler pulley threads by cutting a controlled oversize thread for a reliable seal. This compact kit contains the plugs and gaskets needed to replace worn or stripped threads on idler...- $72.46
- $72.46
- Unit price
- per
-
Vendor:Lisle
Lisle Small Engine Valve Spring Compressor 23300 — 3/4–1-1/16 in Capacity, Screw-Driven Heavy-Duty
The Lisle 23300 Small Engine Valve Spring Compressor is a heavy-duty, screw-driven tool designed to compress valve springs from 3/4" to 1-1/16" for small engines and motorcycles. Built for mechanics and experienced DIYers who service small engines, the Lisle 23300 combines a rigid frame...- $82.31
- $82.31
- Unit price
- per
-
Vendor:Lisle
Lisle oil filter pliers 2.25"–4" adjustable, bent-jaw with sure-grip teeth and cushioned handles
Lisle 50750 Oil Filter Pliers are an adjustable slip-joint wrench designed to grip and remove oil filters from 2 1/4" to 4" with bent jaws and sure-grip teeth for slip-free turning. Built for mechanics and DIYers who need a compact, versatile tool for filter...- $82.16
- $82.16
- Unit price
- per
-
Vendor:Lisle
Lisle Wheel Stud Installer 22800 — Compact Ratchet/Impact Tool for Cars & Light-Truck Studs
The Lisle 22800 Wheel Stud Installer is a dedicated tool that lets you pull new wheel studs precisely into place using a ratchet or impact wrench. If you're replacing worn or broken studs on passenger cars or light trucks, this compact installer makes the...- $73.07
- $73.07
- Unit price
- per
-
Vendor:Lisle
Lisle Truck Wheel Stud Installer 28950 — Heavy-Duty, 22 mm (7/8") Fit, Impact Wrench Compatible
Lisle 28950 is a heavy-duty truck wheel stud installer that pulls new studs into hub bores quickly using an impact wrench or ratchet. Designed for professional mechanics and DIYers who work on trucks and other heavy vehicles, the Lisle 28950 simplifies the process of...- $83.54
- $83.54
- Unit price
- per
-
Vendor:Lisle
Lisle Handy Packer Bearing Packing Tool — 3.5" O.D. Capacity, Mess-Reducing Piston Pack
The Lisle 34550 Handy Packer is a compact bearing-packing tool that flushes old grease and forces fresh grease into bearings up to 3-1/2" O.D. while keeping grease contained inside the tool. The Handy Packer simplifies routine lubrication by allowing you to repack bearings quickly...- $73.80
- $73.80
- Unit price
- per
-
Vendor:Lisle
Lisle Dual Purpose Stethoscope Kit 52750 — 2-Mode mechanical probe and air-leak funnel for automotive & HVAC diagnostics
The Lisle 52750 Dual Purpose Stethoscope Kit is a handheld diagnostic stethoscope that pinpoints both mechanical noises and air-induced leaks in engines, transmissions, HVAC, and other systems. Compact and easy to use, this two-mode stethoscope swaps between a metal probe for mechanical inspections and...- $77.26
- $77.26
- Unit price
- per
-
Vendor:Lisle
Lisle Mechanic’s Stethoscope 52500 — handheld engine diagnostic probe, hollow probe for tight spaces
The Lisle 52500 Mechanic’s Stethoscope is a handheld diagnostic tool that amplifies and pinpoints mechanical noises in engines, transmissions, differentials and bearings. When troubleshooting unusual sounds in vehicles or machinery, isolating the exact source saves time and prevents unnecessary repairs. The Lisle 52500 uses...- $72.50
- $72.50
- Unit price
- per
-
Vendor:Lisle
Lisle Gasket Separator 50210 — hardened carbon-steel blade, side-hammer design
The Lisle 50210 Gasket Separator is a hammer-operated pry tool with a hardened carbon-steel blade designed to break gasket seals cleanly on oil pans, transmission pans and differential covers. Removing a stuck gasket without damaging the mating surfaces is a common challenge in automotive...- $75.57
- $75.57
- Unit price
- per
-
Vendor:Lisle
Lisle Oil Dispenser 8-Quart with 8" Removable Flexible Spout, Translucent Polyethylene - Quart/Liter Markings
Lisle 19702 is an 8-quart polyethylene oil dispenser with a removable flexible 8" spout, cap and lid to keep contaminants out while making bulk oil transfer simple. This sturdy oil container is built for carrying and pouring larger volumes of engine oil, lubricants or...- $93.64
- $93.64
- Unit price
- per
-
Vendor:Lisle
Lisle Exhaust Hanger Removal Pliers 38350 — Universal rubber hanger tool, contoured jaws
Lisle 38350 Exhaust Hanger Removal Pliers are a hand tool designed to quickly and safely pull rubber exhaust hangers off metal hanger pins, making exhaust removal and installation far easier. When working on exhaust systems, separating stubborn rubber supports from their metal brackets can...- $72.94
- $72.94
- Unit price
- per
-
Vendor:Lisle
Lisle Heavy Duty Strap Filter Wrench 60200 — 6-1/2" Capacity, 1/2" Drive Ready, Short Yoke
The Lisle 60200 Heavy Duty Strap Filter Wrench is a compact, durable strap wrench that uses a heat-treated alloy steel yoke and a strong web strap to remove or install filters and cylindrical parts up to 6-1/2 inches in diameter. Designed for mechanics and...- $75.36
- $75.36
- Unit price
- per
-
Vendor:Lisle
Lisle Compression Tester 20250 — Handheld 0–300 PSI Gauge with 14mm & 18mm Spark Plug Adapters for Gasoline Engines
Lisle 20250 is a handheld compression tester that lets you fast and reliably measure gasoline engine cylinder pressure from 0 to 300 PSI (0–2100 kPa). When diagnosing running problems, blow-by, or uneven cylinder performance, a compression test gives a clear, measurable indication of an...- $80.75
- $80.75
- Unit price
- per
-
Vendor:Lisle
Lisle 15/16" Truck Cage Bolt Socket, Extra-Deep — 1/2" Drive, Heat-Treated Alloy Steel
The Lisle 49020 is an extra-deep 15/16" cage bolt socket designed to reach recessed fasteners on truck spring brakes, dump bodies, and heavy-duty chassis components. Built for professional mechanics and fleet technicians, this socket offers the length and strength needed to engage 15/16" caging...- $73.38
- $73.38
- Unit price
- per
-
Vendor:Lisle
Lisle Pocket Carbide Scraper 5" — 3/8" Four-Sided Carbide Insert, Dual-Durometer Handle
The Lisle Pocket Carbide Scraper is a compact 5-inch tool with a four-sided carbide insert designed to remove gasket residue, carbon deposits, and light rust from steel and aluminum engine heads and manifolds. Built for technicians and DIY mechanics who need a reliable hand...- $78.51
- $78.51
- Unit price
- per
-
Vendor:Lisle
Lisle 2-Inch Torque Wrench — Compact 4 in‑lb Valve Core Driver, Pre‑Set Factory Calibration
The Lisle 2-Inch Torque Wrench is a compact, factory-original valve core driver pre-set to 4 inch-pounds to ensure correct tightening without damaging valve assemblies or triggering TPMS warnings. If you work on tires, wheels, or vehicle maintenance, consistent valve core torque matters. This slim...- $73.30
- $73.30
- Unit price
- per
-
Vendor:Lisle
Lisle Battery Terminal & Wiper Arm Puller 54150 — Compact 2-in-1 tool with knurled cone and center screw
The Lisle 54150 is a compact, dual-purpose puller engineered to safely remove stuck battery cable clamps and bolted windshield wiper arms without damaging surrounding components. When battery terminals corrode or wiper arms seize on tapered splines, removing them with improvised tools can bend parts...- $71.63
- $71.63
- Unit price
- per
-
Vendor:Lisle
Lisle Noid Light injector tester — 27800 universal fit with adjustable probes & suction cup
Lisle 27800 Universal Noid Light is a compact, one-person diagnostic tool that reveals whether an electronic fuel injector is receiving proper pulse signals. The Lisle 27800 is built to test throttle body, ported, and sequential central port injectors across most electronic fuel injection systems....- $94.12
- $94.12
- Unit price
- per
-
Vendor:Lisle
Lisle Torque Angle Meter 1/2 Inch Drive — Universal Fit, Dial Readout for Engine Head Bolts
Lisle 28100 is a 1/2" drive torque angle meter designed to measure rotational degrees for torque-to-yield fasteners with a universal fit and skin-pack packaging. This precision gauge lets technicians and DIYers add angle measurement to standard torque procedures, commonly used for head bolts and...- $104.59
- $104.59
- Unit price
- per
-
Vendor:Lisle
Lisle Hose Remover Set 4-Piece — Long & Short Straight and Offset Hooks, Heat‑Treated Steel
Lisle 80380 Hose Remover Set is a four-piece hook and puller kit with long and short, straight and offset hooks designed to remove hoses, clips, seals and fasteners without marring components. Built for technicians and DIY mechanics, this compact tool set combines heat-treated steel...- $100.07
- $100.07
- Unit price
- per
-
Vendor:Lisle
Lisle Water Pump Sprocket Holder for GM Ecotec — Half‑Moon Design, Access‑Cover Mount
Lisle 13800 is a purpose-built sprocket holder that locks the Ecotec water pump gear and timing chain in place while you remove or install the water pump. When servicing GM Ecotec engines, keeping the water pump sprocket and timing chain immobilized is critical to...- $86.21
- $86.21
- Unit price
- per
-
Vendor:Lisle
Lisle NOx & Soot Sensor Offset Socket Set 24mm & 30mm for 2014–Current Ram 3.0L EcoDiesel – 1/2" Drive, 6- & 12-Point
Lisle 12290 is a two-socket offset set made to reach and service NOx and soot sensors on 2014–current Ram 3.0L EcoDiesel V6 engines, giving technicians the clearance and engagement needed to remove and install sensors in tight spaces. When sensor bodies sit behind wiring...- $102.36
- $102.36
- Unit price
- per
-
Vendor:Lisle
Lisle Flywheel Locking Tool for 6.6L Duramax — 22100 Compact Steel Locking Tool, fits 36mm 12-Point Socket
The Lisle 22100 is a purpose-built flywheel locking tool that secures the flywheel on 6.6L Duramax engines with Allison automatic transmissions so you can remove and reinstall the harmonic balancer quickly and safely. Designed for heavy-duty diesel pickups, this compact steel tool holds the...- $102.15
- $102.15
- Unit price
- per
-
Vendor:Lisle
Lisle Line Sockets 19mm & 22mm for Cummins ISB/ISX – Slim, Ratchet-Ready Fuel Fitting Tools
Lisle 12320 Line Sockets are a pair of dedicated 19mm and 22mm sockets made to remove and install fuel line fittings on Cummins ISB and ISX diesel engines safely and reliably. If you work on diesel powertrains, the correct socket profile makes fuel-line service...- $106.33
- $106.33
- Unit price
- per
-
Vendor:Lisle
Lisle Fold-Up Creeper 95002 — Padded Vinyl Low-Profile Mechanic Creeper, Portable
The Lisle 95002 Fold-Up Creeper is a compact, padded vinyl mechanic creeper that folds for easy storage while giving a low-profile, cushioned surface for working under vehicles. Designed for hobbyists and professional technicians who need a portable, comfortable platform for working beneath cars, this...- $110.94
- $110.94
- Unit price
- per
-
Vendor:Lisle
Lisle Long Disc Pliers 13.5" — 37970 extended-reach electrical connector release, dual-durometer grips
Lisle 37970 Long Disc Pliers are a 13.5-inch compound-joint tool designed to safely release locking push-tab electrical connectors in tight engine bays without damaging housings or wiring. These pliers combine extended reach, a compound joint for smooth leverage, and dual-durometer grips so you can...- $98.42
- $98.42
- Unit price
- per
-
Vendor:Lisle
Lisle 8 Qt Low-Profile Oil Dispenser — 8 qt translucent polyethylene, shut-off valve & lid
Lisle 19602 is an 8-quart low-profile oil dispenser with a built-in shut-off valve and lid for clean, controlled transfer of engine oil. This compact, spill-reducing oil container is molded from translucent polyethylene so you can quickly check remaining fluid. Designed to move larger volumes...- $112.59
- $112.59
- Unit price
- per
-
Vendor:Lisle
Lisle Stud Remover 71200 — 1/2" & 3/4" Two-Hole Extractor for 3/8"–3/4" Studs, 1/2" Drive Compact Flush-Mount Design
Lisle 71200 Stud Remover is a compact, two-hole extractor that removes studs and broken bolts flush with mating surfaces without harming surrounding threads. Designed for mechanics and DIYers who tackle engine blocks, cylinder heads, exhaust manifolds and other tight automotive mounting surfaces, the Lisle...- $85.90
- $85.90
- Unit price
- per
-
Vendor:Lisle
Lisle 61040 End Cap Wrench for Toyota & Lexus 65mm 14-Flute — Forged Steel, Chrome-Plated
Forged steel Lisle 61040 end cap wrench removes 65mm, 14-flute Toyota and Lexus cartridge oil filter caps quickly and without slippage. This specialized oil filter cap wrench is engineered to engage the ribs and flutes of OEM Toyota and Lexus cartridge filters so you...- $104.24
- $104.24
- Unit price
- per
-
Vendor:Lisle
Lisle Pro Shear Socket 2-3/8" 1/2"-Drive for Chevy/GMC DRW Hubs, Hardened Black Oxide
The Lisle 31620 Pro Shear Socket is a hardened 2-3/8" 1/2"-drive tool made to remove and install the circular hub nut on 2021 and newer Chevrolet Silverado and GMC Sierra dual rear wheel (DRW) full-floating axles. Built for professional technicians and DIY mechanics who...- $91.97
- $91.97
- Unit price
- per
-
Vendor:Lisle
Lisle CV Boot Clamp Pliers 30800 — Torque-Wrench Compatible Ear‑Style Clamp Tool, Compact Durable
Lisle 30800 CV Boot Clamp Pliers are a purpose-built hand tool for installing and tightening ear-style stainless steel CV boot clamps, sized and shaped to accept torque-wrench operation for consistent clamp closure. This specialty plier is engineered for ear-type clamp work, including GM front-wheel-drive...- $92.99
- $92.99
- Unit price
- per
-
Vendor:Lisle
Lisle Fuel Tank Lock Ring Kit 62970 — 4"–7-1/4" Interchangeable Legs, Compact Centered Drive
The Lisle 62970 is a compact, interchangeable-leg tool designed to remove and install fuel tank lock rings from 4" to 7-1/4" without damaging the tank or ring. If you work on fuel tanks, the Lisle 62970 simplifies a common but fiddly job: engaging serrated...- $125.10
- $125.10
- Unit price
- per
-
Vendor:Lisle
Lisle Pedal Depressor telescoping 18.5–34.5 in | locks for hands-free clutch & brake service
The Lisle 21520 Pedal Depressor is a two-piece telescoping tool that locks at any length between 18-1/2" and 34-1/2" to hold clutch or brake pedals in place for hands-free maintenance and inspections. When you need a stable way to keep a pedal depressed while...- $136.73
- $136.73
- Unit price
- per
-
Vendor:Lisle
Lisle Jiffy-tite Disconnect Set 4-Piece — Low-Profile Tools in Molded Case, Protects Fittings
A compact four-piece tool set that releases fuel and fluid lines from Jiffy-tite quick-connect fittings in confined spaces without removing the retaining clip. This Lisle 22990 4-piece Low Profile Jiffy-tite Disconnect Set provides a precise, low-profile solution for disconnecting lines from Jiffy-tite style quick-connect...- $152.50
- $152.50
- Unit price
- per
-
Vendor:Lisle
Lisle Spill-Free Coolant Funnel Kit — 19-Piece Clear Funnel with Color-Coded Adapters & Extensions
Lisle 24980 is a 19-piece spill-free coolant funnel kit with a clear, hands-free funnel, multiple colored adapters, and a new threaded adapter for select Toyota/Lexus V6 Turbo engines. This complete kit is designed to make filling engine cooling systems fast, accurate, and clean. The...- $124.52
- $124.52
- Unit price
- per
-
Vendor:Lisle
Lisle No-Slip Pulley Puller 39000 — hub-enclosing tool for V-belt & serpentine pulleys, safe removal and installation
Lisle 39000 is a no-slip pulley puller that safely removes and installs pressed-on pulleys for power steering, alternator, and air pump applications without slipping. The Lisle 39000 No Slip Pulley Puller is built to grip the entire pulley hub so you can extract or...- $143.88
- $143.88
- Unit price
- per
-
Vendor:Lisle
Lisle Pickle Fork Kit 6-Piece (41500) — 3 Forged Forks & 2 Alloy-Steel Handles for Ball Joints & Tie Rods
Lisle 41500 Pickle Fork Kit is a six-piece separator set with three heavy-duty forks and two interchangeable handles for removing ball joints, tie rods, pitman arms, and related suspension components. This compact kit bundles durable forged forks and two hardened alloy-steel handles (one for...- $129.72
- $129.72
- Unit price
- per
-
Vendor:Lisle
Lisle Timing Tool for Ford 3.5L/3.7L V6 — Camshaft Locking Kit with Tensioner Holder
The Lisle 37200 is a purpose-built timing tool kit that locks camshaft positions and secures the secondary chain tensioner when servicing Ford 3.5L and 3.7L V6 timing chains. When working on Ford Duratec/3.5L and 3.7L V6 engines, maintaining precise camshaft alignment and immobilizing the...- $138.04
- $138.04
- Unit price
- per
-
Vendor:Lisle
Lisle Truck Anchor Pin Bushing Driver Set 1-3/8" — 2-Pc 11.5" Pneumatic Rod for Install & Removal
The Lisle 29090 is a two-piece pneumatic bushing driver set designed to remove and install 1-3/8" anchor pin bushings and to dislodge stuck anchor pins on trucks and trailers. The Lisle 29090 driver set gives technicians a focused solution for anchor pin and leaf-spring...- $142.01
- $142.01
- Unit price
- per
Get the guides first
Seasonal driving guides for Canada and a heads-up when new stock lands. No spam, unsubscribe any time.










































