VEVOR

VEVOR's Dirt Bike Lift Stand is a compact hydraulic motorcycle jack that safely lifts most dirt bikes up to 440 lbs for maintenance, storage, and cleaning. This low-profile, steel lift stand is built to position the bike off its wheels quickly and securely. It...

VEVOR's 3/8" x 100' galvanized steel winch cable is a heavy-duty wire rope built for robust towing and recovery, rated 15,200 lbs breaking strength with a self-locking swivel hook for safer rigging. This galvanized steel winch cable combines a seven-strand carbon-steel construction with hot-dip...

VEVOR's 3/8" x 75' galvanized steel winch cable is a heavy-duty wire rope built for towing and recovery with a 15,200 lb breaking strength and a self-locking swivel hook. This winch cable pairs rugged carbon-steel construction with hot-dip galvanization to give off-roaders, truck owners,...

VEVOR Wheel Lock Clamp is a two‑piece heavy‑duty, adjustable tire boot designed to immobilize and visibly deter theft on trailers, RVs, cars, trucks, and SUVs. Whether parked short‑term at a job site or long‑term in storage, this two‑pack wheel lock delivers visible protection and...

VEVOR's 21-piece ball joint press kit is a heavy-duty C‑press toolset built to remove and install ball joints, U‑joints, and brake anchor pins on most 2WD and 4WD vehicles. This comprehensive kit assembles durable carbon-steel components, hardened screws and clamps, and a compact carrying...

VEVOR's Portable Tire Bead Seater is a compact, handheld air blaster that delivers a rapid burst of high-pressure air to seat tubeless tire beads onto rims quickly and safely. Changing or repairing tubeless tires often requires a sudden rush of air to snap the...

VEVOR's 5-gallon air tire bead seater is a heavy-duty bead blaster designed to rapidly seat tubeless tire beads on rims by delivering a quick, high-volume burst of compressed air. If you change tires for pickups, trucks, ATVs, lawn tractors, RVs or farm equipment, this...

VEVOR's heavy-duty pintle hook delivers a 20,000 lb towing capacity with a 2" receiver designed to couple securely with 2.5–3" lunette rings for robust trailer connections. If you move heavy equipment, military-style trailers, or agricultural loads, you need a hitch that pairs strength with...

The VEVOR pintle hook is a heavy-duty towing hitch that combines a 20,000 lb gross towing capacity with a 2-5/16" hitch ball and universal adapter to fit 2" and 2.5" receivers and 2.5"–3" lunette rings. Engineered for heavy equipment, agricultural trailers, and commercial towing,...

VEVOR's 28-piece radiator pressure tester kit is a portable all-in-one tool to test cooling system pressure and refill coolant for a wide range of cars, trucks, and motorcycles. This kit combines a durable aluminum hand pump, 17 color-coded adapter caps, three test covers, and...

VEVOR Car Sound Deadening Mat is a 50 mil (1.3mm) butyl rubber automotive mat set that cuts road noise, dampens vibration, and adds heat resistance across 52 sq ft of coverage. If you want to make your car quieter, reduce rattles, and add a...

The VEVOR 3/4-inch barb diesel exhaust fluid (DEF) nozzle is a heavy-duty auto-shutoff dispenser that delivers up to 11.6 gallons per minute for reliable, splash-free filling of urea and similar industrial fluids. Built for fleet, workshop, and farm environments, this compact blue nozzle combines...

VEVOR's 5000 lbs A-frame trailer jack is a heavy-duty, cordless-drill-compatible lift that raises and stabilizes A-frame trailers, RVs, utility trailers, and small boats with a 15-inch vertical travel and adjustable 7-level drop leg. Built for workshops, weekenders, and anyone who tows, this VEVOR trailer...

The VEVOR 5000 lbs A‑Frame Trailer Jack is a heavy-duty electric jack with up to 5000 lb lifting capacity and 15" vertical travel designed to lift, level, and stabilize A-frame trailers quickly and reliably. This trailer jack combines solid construction and corrosion-resistant finishes with...

VEVOR's 12" x 12" interlocking drainage mat set is a modular, extra-thick polypropylene floor system that snaps together to create a durable, non-slip, water-draining surface for garages, workshops, patios, and wet areas. Built from high-strength polypropylene and engineered with a 15 mm thickness, this...

VEVOR's 12" x 12" interlocking drainage mat is a 40-piece modular, non-slip polypropylene tile system designed to quickly drain water and provide a durable, customizable flooring solution for garages, workshops, kitchens, and outdoor wet areas. This modular drainage mat combines a robust polypropylene build,...

VEVOR's 12" x 12" interlocking drainage mats are modular, heavy-duty polypropylene tiles designed to shed water, resist heavy loads, and create a non-slip garage or outdoor floor surface. These 24 splicing mats snap together to form a customizable, elevated floor that drains liquids away...

The VEVOR Interlocking Drainage Mat is a 12" x 12" modular floor tile system (40 pieces) engineered to channel water away, provide a non-slip surface and withstand heavy loads in garages, workshops, and outdoor wet areas. This set of 40 interlocking tiles from VEVOR...

VEVOR 5" rubber curb ramps (two-pack) are heavy-duty, weather-resistant threshold ramps designed to help vehicles, carts, and mobility devices climb curbs and raised surfaces safely. These curb ramps are molded from durable rubber and rated to support up to 33,069 lbs (15 tons) per...

The VEVOR Motorcycle Rear Wheel Stand is a heavy-duty lift that supports up to 850 lbs (390 kg) and raises rear wheels quickly and securely for maintenance, storage, and transport preparation. Designed for home mechanics and professional shops, this rear stand combines a rugged...

VEVOR's rear-wheel motorcycle stand is a heavy-duty lift that supports up to 850 lbs and uses adjustable U- and L-shaped fork heads to cradle a wide range of sport and street bikes for maintenance and storage. This sturdy red rear wheel stand is built...

VEVOR Tire Seater is a compact 2.1-gallon/8 L handheld air blaster that seats and inflates tires up to 22.5" with fast, high-pressure bursts up to 120 PSI. If you work on vehicles—cars, light trucks, tractors, motorcycles, ATVs, or commercial wheels—and need a reliable way...

VEVOR's 5-gallon (19 L) tire bead seater is a high-pressure inflator tank made to quickly seat tire beads on cars, trucks, ATVs and tractors using controlled bursts of compressed air. Designed for professional shops and DIY mechanics who need a fast, reliable way to...

The VEVOR bolt-on swivel trailer jack is a heavy-duty, 5000 lb-rated steel jack that bolts to your trailer tongue to lift and stabilize RVs, horse trailers, utility trailers, and boats across an 11.5"–25.7" range. Built to handle demanding towing and storage tasks, this VEVOR...

VEVOR Heavy Duty Trailer Jack is a bolt-on swivel jack that lifts up to 2,000 lbs and adjusts from 10.5" to 20.2" for RVs, horse trailers, utility trailers and small yachts. Built from carbon steel with a galvanized, rust-resistant finish, this VEVOR trailer jack...

The VEVOR Trailer Jack is a bolt-on, heavy-duty swivel jack that lifts up to 2,500 lbs and offers 15 inches of vertical travel for safe, stable trailer positioning. This compact jack is built to make hitching, leveling, and storing trailers easier without adding complicated...

VEVOR's Motorcycle Lift is a steel scissor jack that raises most street, cruiser, and touring bikes up to 1100 lbs with a wide non-slip deck and six-position safety pin. When performing routine maintenance, cleaning, or storage moves, a stable low-profile center lift makes jobs...

VEVOR 6-ton (13,000 lb) double-locking jack stands are a pair of heavy-duty support stands engineered to hold cars, SUVs, pickups, UTVs and ATVs securely during maintenance and repairs. These VEVOR jack stands combine a high load rating with a broad, stable base and dual...

VEVOR Trailer Jack Block 4-pack provides stable, stackable support up to 6,000 lb per block to level and steady RV jacks, posts, and feet. When you need a compact, durable solution to stop rocking, lower sag, or raise a tongue jack, these VEVOR polypropylene...

The VEVOR 40 in 2-in-1 Folding Mechanic Creeper converts in seconds between a low-profile laydown creeper and a Z-shaped rolling stool for under-car access and seated repair work. This hybrid garage tool blends a low 5-inch stance with a sturdy carbon-steel frame and a...

The VEVOR 40 in 3-in-1 Folding Mechanic Creeper is a convertible under-car roller that flips between a 40" laydown creeper, a padded repair seat with backrest, and a Z-shaped rolling stool for mobile garage work. Designed to make vehicle servicing easier, this heavy-duty creeper...

VEVOR's motorcycle center scissor lift jack is a steel lift that raises and secures bikes up to 1,100 lbs for maintenance, cleaning, and transport-ready storage. This compact, tool-free jack is built for home mechanics and small shops that need a reliable way to elevate...

VEVOR Mechanic Stool is a low-profile, heavy-duty rolling seat that supports up to 300 lbs and includes three slide-out tool trays plus a drawer for organized automotive work. This compact mechanic stool is designed for home garages and professional shops where mobility, tool organization,...

The VEVOR Hydraulic Long Ram Jack is an 8-ton, heavy-duty hydraulic lift that mounts to most shop cranes to raise engines and heavy loads from 26" to 45.7" with a single piston pump and clevis base. This long-ram jack converts a standard crane or...

The VEVOR 4 Ton Hydraulic Long Ram Jack is a heavy-duty cherry picker ram designed to lift engines and heavy components from 24" up to 43.7" with a 4-ton capacity and an easy single-piston manual pump. This long-ram hydraulic jack is built for garages,...

VEVOR's Manual Tire Bead Breaker is a compact, heavy‑duty tool that safely separates the tire bead from rims on 38"–42" wheels for cars, trucks, ATVs, UTVs, tractors and more. Whether you're a backyard mechanic, fleet technician, or outdoor equipment owner, removing stubborn tire beads...

VEVOR's Full Face Motorcycle Helmet is a DOT-approved adult motocross and street helmet with a durable ABS shell, EPS impact liner, removable comfort lining, and both clear and tinted visors for varying light conditions. This helmet blends safety-minded construction with rider-friendly features: a reinforced...

VEVOR's full-face motorcycle helmet (XL) is a DOT-approved, lightweight motocross and street helmet with interchangeable clear and tinted visors, multi-vent airflow, and a washable comfort liner for all-day riding. This adult-size motorcycle helmet blends safety-focused construction with convenience features for both dirt-bike and street...

VEVOR Full Face Motorcycle Helmet is a DOT-approved, full-coverage adult motocross and street helmet with a clear visor, quick-swap tinted lens, and lightweight comfort features for long rides. This full face helmet from VEVOR blends protective engineering with everyday convenience. Built with a high-strength...

The VEVOR 16" Rivet Nut Tool is a heavy-duty, hand-operated rivnut gun kit that sets threaded insert nuts quickly and releases them with a twist knob for fast, labor-saving installations. If you need a single tool to install threaded rivet nuts across a wide...

VEVOR's 16-inch rivet nut tool kit is a long-handled, semi-automatic rivnut setter that installs and removes threaded rivet nuts across 13 metric and SAE sizes. This heavy-duty kit groups a leverage-optimized hand tool with 13 mandrels and 186 rivet nuts so you can fasten...

VEVOR's 9-inch ratchet rivet nut tool kit is a complete rivnut solution with 10 interchangeable mandrels and 100 rivet nuts for fast, sturdy blind nut installation across metric and SAE sizes. This compact kit bundles the hand tool, ten durable mandrels, and a hundred...

VEVOR Temporary Power Outlet Panel is a weatherproof, prewired RV electrical breaker box that supplies a 30A NEMA outlet and a 20A GFCI receptacle for safe, temporary power hookups. This compact, heavy-duty panel is built to give campers, contractors, and EV users quick access...

VEVOR's 12V 140A Split Charge Relay Kit is a voltage-sensitive dual-battery isolator that automatically charges a secondary battery while protecting your starter battery from discharge. This all-in-one split charge relay kit includes the relay module plus cables, terminals, fuses and mounting hardware so you...

VEVOR's 12V 300A dual battery isolator is a compact voltage-sensitive relay with LCD readout that manages charging between two batteries in manual or automatic modes for cars, trucks, RVs, UTVs, ATVs and boats. If you run two-battery systems—starter plus auxiliary or house batteries—this VEVOR...

VEVOR's 20-ton hydraulic bottle jack is a compact, all-welded lifting tool designed to raise heavy vehicles and equipment from about 7.5 to 14 inches with smooth, leak-resistant operation. This heavy-duty bottle jack combines a high 20-ton capacity with a broad lifting range and a...

VEVOR 264.2 Gal Collapsible Water Storage Bladder is a heavy-duty, foldable PVC tank designed to store, transport and dispense large volumes of water for irrigation, RVs and emergency use. This 1000L (264.2 gallon) soft water bag combines reinforced 1000D double-layer PVC with heat-fused seams...

VEVOR's boat trailer winch stand is a hot-dip galvanized, adjustable winch post with a 1200 lb winch, 5.1" roller and secure U-bolt mount designed to make loading and securing watercraft safer and easier. Whether you're towing a jet ski, small sailboat, or speedboat, this...

VEVOR's trailer coupler lock is a heavy-duty, corrosion-resistant hitch lock engineered to secure 2" and 2-5/16" bulldog-style couplers for RVs, trailers, and boats. Designed for owners who tow, store, or leave trailers unattended, this hitch lock combines thick carbon-steel construction with weatherproof finishes and...

VEVOR's 3500 lb portable electric winch is a compact, box-style 12V recovery kit that combines a 1.3 HP motor, synthetic rope, a strap, and both wireless and wired remotes for off-road pulling and vehicle recovery. This all-in-one portable winch kit is designed to simplify...