3D Ceramic Coating Surface Prep Wipe — 1 Gallon Concentrated Cleaner for Paint & Glass, Removes Oils for Better Bonding

3D Wipe Ceramic Coating Surface Prep is a concentrated cleaner that removes oils, lubricants, and residues from paint, glass, wheels, and trim so ceramic coatings bond cleanly and last longer.

If you plan to install a ceramic coating, surface cleanliness is critical. 3D Wipe is formulated to lift and dissolve polishing oils, wax residues, and manufacturing films that interfere with coating adhesion, delivering a ready-to-coat surface without aggressive abrasion. Packaged in a one-gallon container, this prep solution is designed for detailers and enthusiastic DIYers who need a reliable final step before applying ceramic coatings.

How does 3D Wipe improve ceramic coating longevity?

By removing contaminants that block intimate contact between the coating and paint, 3D Wipe helps the coating form a stronger, more uniform bond. Better adhesion reduces premature lifting or uneven cure zones, contributing to more consistent protection and gloss over time.

• Removes polishing oils and lubricants left from compound or polish.
• Eliminates wax and sealant residues that resist coating adhesion.
• Prepares glass and trim for even coating application.

Is 3D Wipe safe for different exterior surfaces?

Yes—3D Wipe is formulated to be safe on painted panels, clear coats, wheels, glass, and exterior trim when used as directed. It cleans without aggressive solvents that can dull finishes, making it suitable as the final wipe-down before coating.

• Compatible with clear coat, single-stage paint, and factory finishes.
• Safe on wheel finishes and automotive glass for a streak-free result.
• Use on trim areas to avoid coating overlap or high-spotting.

How do I apply 3D Wipe for best results?

Work in small sections and wipe the surface thoroughly to ensure all residues are removed. Use a clean, lint-free microfiber and allow no product pooling—this helps the coating make full contact with the paint for proper bonding.

• Spray lightly onto a 2x2 to 2x3-foot section or onto a microfiber towel.
• Wipe in overlapping passes until the surface appears clean and residue-free.
• Turn to a fresh towel face as soon as it becomes contaminated; repeat across the vehicle.

What advantages does the one-gallon size offer?

The one-gallon container provides enough product for multiple vehicles or full-detail projects, making it cost-effective for shops and hobbyists who coat frequently. It also reduces the need to refill small bottles during a job, saving time on busy detailing sessions.

• Economical for professional detailers and frequent DIY applications.
• Lower waste and fewer refill interruptions during prep work.
• Easy to decant into spray bottles for convenient section-by-section use.

Who is this for? 3D Wipe Ceramic Coating Surface Prep is intended for professional detailers, ceramic coating installers, and committed enthusiasts who want a dependable final-clean step before coating. If you value consistent coating results, reduced rework, and a product developed by a company with over 25 years of car-care experience, this one-gallon prep solution gives a practical, scalable way to prepare paint, glass, wheels, and trim for a cleaner, stronger ceramic coating bond.