ARANA Gas Strut Mounting Brackets for 10mm Ball Studs — 304 Stainless Steel 4-Piece Corrosion-Resistant Kit

ARANA 304 stainless steel mounting brackets for 10mm ball-stud gas struts are a corrosion-resistant, heavy-duty bracket kit including two angled and two flat mounts plus fasteners for reliable lid, door, and hatch installations.

Engineered for marine, automotive, cabinetry, and outdoor equipment, this ARANA kit uses 304 stainless steel for long-term resistance to saltwater and humid environments. The set supports universal 10mm ball-stud connectors and is rated to pair with gas springs up to 200 lb. The package includes all necessary brackets and screws so you can mount struts on lids, doors, frames, or angled surfaces with minimal fabrication.

How do these brackets perform in wet or coastal environments?

The brackets are stamped from 304 stainless steel, a common choice for resisting corrosion from seawater and moisture. Their finish and material minimize rusting risks compared with standard steel, extending service life in marine and outdoor installations.

• 304 stainless steel construction resists salt and humidity.
• Galvanized flat brackets provide added surface protection.
• Suitable for boat hatches, outdoor storage, and coastal hardware.

What kinds of gas struts and loads are compatible with this kit?

These mounts accept gas strut connectors with a 10mm bore, accommodating both nylon and metal head fittings. The hardware is intended for use with gas springs up to 200 lb, making it suitable for medium- to heavy-duty lids and doors when installed correctly.

• Fits universal 10mm ball-stud struts (nylon or iron head).
• Recommended pairing with struts rated up to 200 lb.
• Use correct torque and screw placement for safe load support.

What is included in the package and how do the angled vs flat brackets differ?

The kit contains two angled mounting brackets and two flat-shaped brackets, plus 16 screws to secure them. Flat brackets work best for attaching struts to vertical or side frames, while angled brackets are made for lids, covers, or slanted surfaces where alignment demands a tilt.

• 2 angled brackets for lid or cover mounting.
• 2 flat brackets for side-frame or vertical mounting.
• 16 screws included for straightforward installation.

How should I install these brackets for reliable operation?

Position the flat bracket on the side frame and the angled bracket on the lid so the strut is slightly compressed at rest; this provides proper assist and reduces shock. Use the supplied screws and torque them to secure contact without deforming the bracket. Regularly check fasteners in high-vibration settings.

• Mount brackets with supplied screws; ensure correct alignment.
• Pre-drill pilot holes to prevent material splitting on wood or composites.
• Inspect and re-tighten fasteners periodically in high-vibration environments.

Who this is for: installers, boat owners, cabinetmakers, RV and van converters, and fabricators who need a compact, corrosion-resistant solution for mounting 10mm gas struts. If you’re fitting hatches, storage lids, or service panels exposed to moisture or salt air, this ARANA kit supplies the brackets and hardware to complete the job with durable stainless-steel components. For any issues after delivery, ARANA offers support and assistance to resolve product concerns.