AUGREX DA-4 OBDII Cable Adapter for Snap-on Solus Ultra EESC318 — 6ft, Heavy-Duty Shielded Lead

The AUGREX DA-4 OBDII cable adaptor converts a 26-pin connector to a standard 16-pin OBD2 plug so your Snap-on Solus Ultra (EESC318) scanner can reach modern vehicle ports.

If you need a durable replacement or spare lead for a Solus Ultra diagnostic tool, this DA-4 adaptor gives you the correct pin conversion and extra length to make connections easier during repairs. It’s designed to match the wiring configuration Snap-on tools expect while offering a heavy-duty molded jacket and shielding for reliable signal delivery. Note: this is a compatible third-party cable and not manufactured by Snap-on; verify your scanner model before ordering.

How does this cable adapt a 26-pin port to a 16-pin OBD2 vehicle connector?

The DA-4 cable houses a 26-pin female connector on one end and a standard 16-pin male OBD2 plug on the other, routing the specific signals required by the Solus Ultra scanner. Internal wiring maps the original DA-4 pinout to the OBD2 layout so the tool can communicate with the vehicle ECU. Using the correct adapter avoids miswiring and ensures the scanner receives the expected diagnostic channels.

• 26-pin female to 16-pin male OBD2 conversion for Solus Ultra EESC318
• Pre-mapped wiring compatible with Snap-on DA-4 expectations
• Plug-and-play connection—no soldering or rewiring needed

Will the cable reach across an engine bay or into cramped service bays?

Yes — the cable is 6 feet long to give you more freedom when positioning the scanner away from the vehicle’s diagnostic port. The extra length helps when working on trucks or when the scan tool must be kept on a workbench. It also reduces strain on connectors by allowing a natural routing path.

• 6-foot total length for flexible positioning
• Extra slack reduces connector stress during use
• Suitable for passenger cars and many light trucks

Is this cable durable enough for daily shop use?

The AUGREX DA-4 uses a thick, molded outer jacket and heavy shielding to resist abrasion, oil, and common workshop wear. The reinforced strain reliefs at both ends protect pins from bending during frequent plug/unplug cycles. While it’s not an OEM Snap-on part, its construction focuses on long-term reliability in a professional environment.

• Thick-shielded, heavy-duty molded cable jacket
• Reinforced connector ends to prevent pin damage
• Quality materials for everyday diagnostic use

What models and part numbers does this replace or match?

This cable is intended as a direct replacement for the DA-4 lead used with Solus Ultra scanners and lists equivalent part numbers for easy cross-reference. Check the scanner model and the port style on your device to confirm fit before purchasing. Keep in mind the cable is a compatible aftermarket option rather than an original Snap-on product.

• Fits Solus Ultra EESC318 DA-4 style connections
• Replaces part numbers EAX0068L00C and EAX0068L26A
• Confirm your scan tool model matches the listing

Who is this for: Technicians, independent mechanics, and DIYers who own a Snap-on Solus Ultra EESC318 scanner and need a dependable 26-pin-to-16-pin conversion lead will find this AUGREX DA-4 cable useful. It’s especially practical as a shop spare or replacement when the original cable is worn or missing. Purchase it if you require a longer, well-shielded cord for routine diagnostics and don’t need an OEM-labeled part.

• Fitment: OBDII OBD2 cable fit for Snap on DA-4 for SOLUS ULTRA Scanner EESC318. Cable is NOT made by Snap-on
• Replace Part Number: Replace EAX0068L00C, EAX0068L26A
• Pin: 26-pin female to 16-pin male OBD2
• Cable Length: 6 Feet, DA-4 OBD2 cable is long enough for your convenience
• Top Quality molded: Heavy Duty Thick-Shielded Cable for best Test Results, NOTICE: Please make sure your scan tool model matches what is listed here