AUXITO 194/168 T10 Wedge LED Bulbs Blue - Pack of 10, 240LM 360° Canbus-Friendly 24×3014 SMD

AUXITO 194 blue wedge LED bulbs are ultra-blue, plug-and-play T10 replacements that deliver bright, 360° illumination for interior and exterior car lights without triggering Canbus errors.

These compact 12V LED lamps are engineered as direct replacements for 168/175/194/2825/W5W sockets and use twenty-four 3014 SMD chips per bulb to produce a vivid, evenly distributed blue glow. Designed for low power draw and broad compatibility, the bulbs give license plate lights, dome lights, map lights, and marker lights a crisp, modern appearance while fitting into tight housings with a 1 x 0.47 inch profile.

How bright are these AUXITO bulbs compared with stock incandescent lamps?

Each bulb outputs about 240 lumens while using roughly 2W, offering a dramatic increase in visible light per watt versus many factory incandescent bulbs. The dense 24-chip 3014 SMD layout spreads light evenly so you get consistent color and fewer hot spots.

• 240 LM per bulb at 2W power consumption
• 24 × 3014 SMD chips for uniform illumination
• 360° light distribution—reduces dark corners
• Compact dimensions: ~1.0 × 0.47 inches for tight fit

Will these LEDs cause dashboard errors or flicker on Canbus-equipped vehicles?

These replacement lamps are designed to be Canbus-friendly and to work without triggering common bulb-out warnings on many modern cars. They incorporate circuitry intended to mimic standard load, but outcomes can vary by vehicle electrical systems and trim.

• Marketed as Canbus error-free in many installations
• Plug-and-play installation—no wiring required in most cases
• Double-check by comparing original bulb size and diagnostics if warnings appear
• Extra resistors or adapters can be added if a particular vehicle still reports errors

Which sockets and vehicle locations are these bulbs suitable for?

These AUXITO LEDs are made to replace common wedge-style bulbs like 168, 175, 194, 2825, W5W and T10, so they work in a wide range of interior and exterior applications. They are especially useful where bright, colored accent or functional lighting is desired.

• License plate and rear marker lights
• Dome, map, and reading lights inside the cabin
• Trunk, glove box, and cargo area illumination
• Side marker, parking, and exterior accent lights

How simple is installation and what should I check before buying?

Installation is typically very straightforward: remove the old wedge bulb and push in the AUXITO LED in the same socket. Because trim and model years can vary, confirm your vehicle's bulb size with the owner's manual or by checking the existing lamp before ordering to ensure a proper fit.

• Tool-free, plug-and-play replacement in most installations
• Confirm bulb size (168/175/194/2825/W5W/T10) before purchase
• Package contains 10 bulbs—handy for multiple locations or spares
• Note: some vehicle models may still need resistors or adapters

Who this product is for: Drivers looking to upgrade their vehicle lighting to a bright, attention-grabbing blue with minimal fuss will appreciate these AUXITO wedge LEDs. They suit DIY owners who want efficient, low-heat bulbs for interior accents, license plates, or marker lights—and anyone replacing multiple bulbs, since the pack includes ten pieces. If you need absolute compatibility with a specific vehicle’s Canbus system, verify the fit and electrical behavior for your make and year before installation.