Ciuouient Waste Ball Kit for Thetford Aqua Magic Toilets — Replace 34117/34120, Complete Seal & Drive Arm

The Ciuouient 34117 Waste Ball Kit (replace 34120) is a complete replacement set that restores smooth sealing and operation for Thetford Aqua Magic style caravan and RV toilets.

If your Thetford Aqua Magic Style II, Lite, or Plus toilet is leaking, sticking, or not shutting off properly, the waste ball assembly and seals are frequent causes. This Ciuouient kit supplies the waste ball, seals, drive arm and hardware you need to rebuild the valve mechanism so the bowl opens and closes reliably and reduces water loss. All components are sized to match part numbers 34117 and 34120 for direct-fit replacement.

How does this kit fix leaks and poor flushing performance?

Worn or hardened seals allow water to bypass the waste ball and cause continuous flow or slow drain. Replacing the waste ball and its associated seals restores the intended contact surfaces and re-establishes a watertight closure under the flange and around the ball.

• Includes a new waste ball and waste ball seal for fresh contact surfaces
• Closet flange seal replaces the under-base gasket to stop under-toilet leaks
• U-cup seals renew the push/pump sealing points that wear with use
• Drive arm and plastic rings reduce sticking and improve actuation

What parts are included and what are their roles?

The kit bundles the core components needed for a full waste ball valve service. Each piece is designed to fit together so you can remove the old assembly and replace it without sourcing multiple separate parts.

• 1x waste ball — the rotating valve that opens and closes the outlet
• 1x waste ball seal — seals the ball to the valve housing
• 2x “U” cup seals — replace pump and linkage sealing points
• 1x closet flange seal — prevents leaks beneath the toilet base
• 1x waste ball drive arm, 2x screws, 4x plastic rings — hardware for smooth operation

Is this kit compatible with my toilet and how do I install it?

This Ciuouient kit is compatible with Thetford Aqua Magic Style II, Style Lite and Style Plus toilets when those units use parts 34117 or 34120. Before installation, turn off water, empty and clean the toilet and lines. Remove the old seals under the base and the existing waste ball assembly, then fit the new pieces following your toilet’s service instructions.

• Verify your toilet model and existing part number matches 34117 or 34120
• Shut off and drain water, clean the bowl and valve area thoroughly
• Swap out the old seals, ball, and drive arm; secure with provided screws
• Test operation and check for leaks before regular use

What improvements can I expect after replacing these parts?

Once installed, the waste ball will rotate more freely and form a better seal, which reduces unwanted flow and improves flush control. The included drive arm and plastic rings help prevent sticking that commonly develops with worn linkages.

• Smoother actuation and reduced chance of a stuck waste ball
• Improved sealing to minimize water wasting and under-base leaks
• Renewed hardware that matches the original fit and function

Who is this for: The Ciuouient 34117 Waste Ball Kit is aimed at RV and caravan owners, maintenance technicians, and DIYers who need a direct replacement for Thetford Aqua Magic Style II, Lite, or Plus toilets. If your toilet is leaking, failing to seal, or the waste ball is sticky, this kit gives you the parts required to return the valve assembly to reliable operation without buying a full new toilet.