Comp Cams cam & lifter installation lube 8 oz — heavy-duty assembly protection for camshafts and gears

When a new camshaft or lifter set goes into an engine, the first moments of operation expose delicate metal surfaces to extreme pressure before full oil circulation and hydrodynamic film develop. COMP Cams 153 Installation Lube is designed to provide immediate, heavy-duty protection at assembly and during the break-in process, reducing the risk of premature wear on lobes, lifter bottoms, and mating gears.

How should I apply COMP Cams 153 for best protection?

Apply the lube generously to every cam lobe, the underside of each lifter, and the distributor gear at installation. Ensure even coverage so the high-friction contact points have a continuous protective layer before oil pressure builds.

• Spread on every cam lobe and base area that contacts lifters.
• Coat the bottom faces of lifters thoroughly before installation.
• Apply to distributor gear teeth that mesh with the cam or drive gear.
• Use a brush or your finger (with gloves) for precise placement; avoid contaminating the bottle tip.

Will this lube affect my cam break-in procedure?

COMP Cams 153 is formulated specifically for assembly and initial run-in; it does not replace the break-in oil regimen but complements it by guarding metal surfaces before oil pressure stabilizes. Follow the cam manufacturer’s warm-up and rpm recommendations while using the lube to ensure proper mating and seating.

• Use alongside recommended break-in oil—this lube protects before oil film forms.
• Do not rely solely on assembly lube for long-term lubrication.
• Monitor engine temperature and follow specified RPM windows during break-in.

What parts benefit most from this installation lube?

The product targets the engine components that see the greatest boundary lubrication stress at start-up: cam lobes, lifter faces, and distributor gear teeth. By creating a heavy, clingy protective film, it reduces metal-to-metal wear until full hydrodynamic lubrication is established.

• Camshaft lobes and journals.
• Lifter bottoms and contact faces.
• Distributor and cam drive gears.
• Other assembly surfaces that require temporary heavy-duty protection.

Who is this for: COMP Cams 153 is intended for engine builders, performance enthusiasts, racers, and mechanics installing new camshafts, lifters, or rebuilding engines. It’s especially useful whenever components are exposed to initial dry-start conditions or when precise break-in protection is required—works on street builds, track engines, and any application where cam and lifter longevity matters. Part number 153; 8 fluid ounces per bottle.