CURT Loaded Ball Mount with 2" Ball — 2" Shank, 6" Drop, 7,500 lb GTW, Pre-Torqued Gloss Black

The CURT loaded ball mount with a 2-inch ball is a ready-to-tow, factory-assembled hitch accessory rated for 7,500 lbs gross trailer weight and a 6-inch drop for precise trailer leveling.

This loaded ball mount from CURT arrives with a pre-torqued 2" trailer ball, pin, and clip so you can hitch and haul without installing separate components. Built on a 2" x 2" hollow shank and finished in gloss black powder coat, the unit balances durability, corrosion protection, and lighter weight. With a 7,500 lb gross trailer weight (GTW) and 750 lb tongue weight (TW) capacity, it fits many common trailers including boat, utility, camper, ATV, and motorcycle trailers — as always, do not exceed the lowest rating among vehicle, hitch and trailer components.

How does this ball mount simplify towing setup?

The CURT loaded design eliminates the need to buy, torque, and install a separate trailer ball. It arrives pre-assembled and factory-torqued, ready to drop into a 2" receiver and secure with the included pin and clip. That saves time and ensures the ball is tightened to the manufacturer's spec for safe connections.

• Factory-torqued 2" trailer ball already installed.
• Includes matching pin and clip for immediate mounting.
• 2" x 2" shank fits standard 2" receivers.
• Hollow shank reduces weight and accepts anti-rattle kits.

Will this ball mount handle my trailer weight and level the trailer properly?

With a 7,500 lb GTW and 750 lb TW rating, this CURT mount supports many mid-sized towing tasks, and its 6" drop helps align trailers that sit lower than the tow vehicle. Use it when the trailer tongue sits lower than the hitch pin height; measure tongue height and hitch height to confirm this 6" drop produces a level tow. Always verify the vehicle, hitch, and trailer ratings before use.

• 7,500 lb gross trailer weight capacity.
• 750 lb tongue weight rating for secure towing limits.
• 6" drop to correct common height differences between vehicle and trailer.
• 9-1/4" length for standard clearance and handling.

What makes the construction and finish reliable for long-term use?

CURT builds this loaded ball mount with a hollow 2" shank and a durable steel body, then applies a gloss black powder coat to resist chipping, rust, and UV damage. The hollow design reduces overall weight and makes the mount compatible with many anti-rattle solutions. Factory torque and quality control help ensure consistent performance across units.

• Gloss black powder coat for corrosion and UV resistance.
• Hollow shank for reduced weight and anti-rattle compatibility.
• Factory-assembled components to CURT torque standards.
• 2" trailer ball sized to accept most common couplers.

How do I verify fit and safe use before towing?

Confirm the 2" x 2" receiver on your tow vehicle, measure hitch pin height versus trailer coupler height, and ensure the trailer’s GTW and tongue weight do not exceed the lowest component rating. Inspect the powder coat for shipping damage and re-check ball torque periodically according to CURT's guidelines and your vehicle manual.

• Measure receiver opening: 2" x 2" required.
• Compare hitch pin height to trailer coupler height for 6" drop suitability.
• Confirm combined towing ratings: vehicle, hitch, ball mount, and trailer.
• Use included pin and clip; add anti-rattle kit if needed.

Who is this for: The CURT loaded ball mount with a 2" ball is designed for owners of trucks, SUVs, and vans who tow mid-weight trailers and prefer a ready-to-use, factory-assembled solution. It suits recreational boaters, campers, ATV and motorcycle haulers, and anyone who wants a straightforward, corrosion-resistant hitch setup that minimizes installation steps while providing dependable rated capacity. If your towing needs fall within 7,500 lb GTW and 750 lb TW and your vehicle has a 2" receiver, this CURT mount is a practical choice.