Dasbecan Ignition Lock Cylinder Assembly with ID46 Chip — 2 Keys, Fits Honda 2006–2011, Full Lock Kit

Dasbecan Ignition Switch Lock Cylinder Assembly is a complete replacement kit that restores ignition, door, and fuel cap locks and includes two programmed-ready ID46 chip keys for compatible Honda models (2006–2011).

If your Honda’s ignition won’t turn, or your door and fuel cap locks are worn, this Dasbecan assembly provides a full hardware replacement designed to match factory fitment for many late‑2000s Honda models. The kit comes with the ignition lock cylinder, a left door lock, a fuel cap lock, mounting hardware, and two 2‑button immobilizer keys that contain ID46 transponder chips. It’s engineered to replace part numbers 06350‑SAA‑G30 and 35100‑SDA‑A71, but note that the transponder keys require programming to your vehicle’s immobilizer system before the engine will start.

Which Honda models and years will this Dasbecan ignition set fit?

This assembly is intended for specific Honda model years that use the ID46 transponder system. It fits a selection of Accords, Civics, CR‑Vs, Fits, and Odysseys made in the late 2000s and early 2010s. Verify your vehicle year and part numbers before ordering to ensure compatibility.

• Compatible models: Honda Accord (2008–2011)
• Honda CR‑V (2007–2010), Honda Fit (2009–2011)
• Honda Odyssey (2009–2011), Honda Civic (2006–2011)
• Replaces OEM numbers: 06350‑SAA‑G30 and 35100‑SDA‑A71

How does the ID46 chip key in the kit work and what programming is required?

The two keys included have ID46 transponder chips embedded, which communicate with your car’s immobilizer. The chips are unpaired out of the box and must be programmed or matched to your vehicle’s engine control unit by a locksmith or dealership so the car will recognize them and start.

• Keys include ID46 transponders — ready to be programmed
• Programming required: locksmith, dealer, or professional key programmer
• Without programming, the engine immobilizer will prevent startup
• Not compatible with vehicles using different transponder types

What does the kit include and what’s needed for installation?

This Dasbecan kit supplies the primary lock components for ignition, driver door, and fuel cap plus the basic mounting hardware. Installation typically requires common automotive tools and basic mechanical experience; professional installation is recommended if you’re unfamiliar with steering column or door lock work.

• Included: ignition switch lock cylinder, left door lock, fuel cap lock
• Hardware: 2 bolts and 1 bracket are provided
• Two 2‑button immobilizer keys (ID46 chips) included
• Extra step: have keys programmed to vehicle after install

Are there limitations or special notes to consider before buying?

There are a few important restrictions: this assembly is not suitable for manual‑transmission vehicles and will only work with cars that accept ID46 chips. Confirm your car’s transponder type and transmission before purchase to avoid compatibility problems.

• Not compatible with manual transmission vehicles
• Only for vehicles that require ID46 transponder keys
• Keys must be matched to vehicle computer to start engine
• Check OEM part numbers and model year compatibility first

Who is this for? This Dasbecan replacement assembly is built for Honda owners, independent repair shops, and DIY mechanics who need a direct-fit ignition and lock replacement for compatible late‑2000s Hondas and want a single kit that covers ignition, driver door, and fuel cap. Choose this kit if you require OEM‑style hardware replacements and are prepared to have the included ID46 keys professionally programmed to your vehicle’s immobilizer system.