Design Engineering Reflect-A-Gold High-Temp Reflective Adhesive Tape 1.5" x 15' — UV‑Resistant, Heat‑Shield

Design Engineering Reflect-A-Gold is a lightweight, metalized high-temperature adhesive tape engineered to reflect radiant heat and protect vehicle components in extreme temperature environments.

Reflect-A-Gold combines a metalized polyamide surface bonded to glass cloth with a high-temperature pressure-sensitive adhesive to deliver a durable, removable barrier against radiant heat. The roll measures 1.5 inches by 15 feet and is intended for automotive and motorsport applications where temperatures swing rapidly and parts need extra thermal protection. It is easy to shape and apply, resists UV degradation, and the adhesive liner is rated to withstand elevated temperatures during assembly.

How does Reflect-A-Gold reduce heat exposure to nearby components?

The reflective metalized layer redirects radiant heat away from vulnerable parts, lowering the heat load on hoses, wiring, and interior panels. The glass cloth core adds dimensional stability and mechanical strength, helping the tape hold shape under vibration and thermal cycles.

• Reflective metalized polyamide surface redirects infrared and radiant heat.
• Glass cloth reinforcement resists tearing and maintains coverage.
• Pressure-sensitive high-temp adhesive bonds quickly to clean substrates.
• Adhesive liner tolerates high assembly temperatures (up to 325°F).

Where can I apply this tape on a vehicle or machine?

Use Reflect-A-Gold on firewalls, engine covers, bulkheads, fuel cell housings, floor pans, and under-seat areas where heat transfer threatens components or passenger comfort. It adheres to metal, composites, and many rigid surfaces—ideal for spot repairs or continuous runs in confined locations.

• Firewall and bulkhead heat shielding to protect wiring and controls.
• Engine bay covers, manifolds, and turbo proximity shielding.
• Under-hood and underbody patches near exhaust paths.
• Seat bottoms and floor areas to block heat intrusion into cabin.

What temperature and durability limits should I expect?

Reflect-A-Gold is formulated to withstand continuous service at elevated temperatures and to tolerate extreme thermal cycling without rapid degradation. It resists UV exposure for longer life in exposed installations, though it should not be treated as permanent structural fastener—regular inspections in severe conditions are advised.

• Capable of continual exposure up to 850°F in reflective service.
• UV-resistant surface for outdoor and engine-bay longevity.
• Adhesive performance remains reliable across temperature swings.
• Designed for removability and rework when repairs or access are needed.

How do I prepare surfaces and install the tape correctly?

For best adhesion, clean surfaces free of oil, dirt, and loose corrosion; rough or porous substrates may require primer or extra pressure for full contact. Measure and cut the tape to size, remove the heat-rated release liner, press in place, and use a roller or firm hand pressure to set the bond.

• Clean surface with solvent or alcohol and let fully dry.
• Cut to fit and remove protective release liner before application.
• Apply firm pressure or a roller to ensure full adhesive contact.
• Inspect periodically, especially near high-vibration zones.

Who is this for: Reflect-A-Gold is aimed at automotive technicians, race teams, custom car builders, aircraft restorers, and maintenance professionals who need a high-performance, removable thermal barrier. It suits anyone wanting to reduce radiant heat transfer to electrical components, fuel systems, interiors, or other heat-sensitive parts without adding heavy bulk or complex installation.