Durabasics Ultrasonic Cleaner Solution 1 Gallon – Heavy-Duty Parts & Carburetor Cleaner

Durabasics 1 Gallon Ultrasonic Cleaner Solution is a concentrated, professional-strength cleaner formulated for ultrasonic and immersion washers to remove carbon, grease, varnish, and gums from carburetors and engine parts.

This heavy-duty, fragrance-free formula is designed for mechanics, restorers, and DIY enthusiasts who need a reliable cleaner that works deep inside passages, blind holes, and complex castings. Mix the concentrate at the recommended ratio for powerful cavitation-assisted cleaning that reduces manual scrubbing and shortens rebuild times. It’s engineered to be safe on common metals while delivering the aggressive performance required for automotive, motorcycle, and small-engine work.

How do I use this solution in an ultrasonic cleaner?

Prepare the cleaning bath by diluting the concentrate with water using the 1:5 ratio (one part solution to five parts water) unless your specific application calls for a different concentration. Fill the ultrasonic tank to the manufacturer’s recommended level, heat if advised, and run cycles until contaminants loosen and lift away. Rinse parts thoroughly after cleaning and dry to prevent oxidation.

• Mix ratio: 1 part Durabasics concentrate to 5 parts water for general use.
• For heavy deposits, increase concentrate slightly and extend cycle time.
• Rinse parts in clean water and air-dry or use compressed air after cleaning.
• Follow ultrasonic machine instructions for temperature and cycle length.

Which materials and parts is it safe to clean?

The formula is intended for common engine and mechanical metals and is safe on aluminum, brass, copper, and cast iron when used according to directions. Avoid using on materials that are inherently reactive or untested, such as soft-plated finishes, certain polymers, or electronic components unless manufacturer guidance allows immersion cleaning. When in doubt, test a small area first.

• Safely cleans aluminum carburetors and intake parts.
• Effective on brass jets, copper fittings, and cast-iron valves.
• Not recommended for delicate plated finishes without testing.
• Avoid direct immersion of sensitive electronics or sealed components.

How well does it remove carbon, varnish, and grease?

Designed for industrial-strength cleaning, the solution assists ultrasonic cavitation to break up carbonized deposits, varnish layers, and oily grime in hard-to-reach areas. The micro-bubble action created by the ultrasonic unit carries cleaning action into tiny passages and blind holes, dislodging deposits that manual brushing often cannot reach. Results depend on concentration, temperature, and cycle time.

• Pentrates jets, passages, and choke bores to loosen carbon and gum.
• Works on oil, grease, and baked-on varnish with extended cycles.
• Concentrated formula keeps per-cycle costs low for workshops.
• Fragrance-free to avoid masking residues or introducing scents.

What precautions should I take when using the cleaner?

Use gloves and eye protection to avoid skin and eye contact; ensure good ventilation in the workspace. Do not mix with other chemicals unless specified by the manufacturer, and always follow the ultrasonic unit’s safety and temperature guidelines. Store the concentrate in a cool, dry place away from children and pets.

• Wear protective gloves and safety glasses during handling.
• Do not mix with acids or unknown cleaners.
• Flush and dispose of used solution according to local regulations.
• Label and store the 1-gallon container securely.

Who is this for: Durabasics Ultrasonic Cleaner Solution is made for mechanics, vintage motorcycle and small-engine restorers, auto-repair shops, and anyone rebuilding carburetors or cleaning engine components. It suits users who own or operate ultrasonic or immersion washers and need a concentrated, professional cleaner that reduces manual labor while protecting common metal parts when used as directed.

Ingredients

Unscented