dynofit M14x2 Open-End Tuner Lug Nuts for 6-Lug Ford F150/Expedition (2000–2014) — 24pc Zinc-Plated, 60° Seat

These are Dynofit M14x2 open-end tuner lug nuts (24 pieces) designed to replace or upgrade 6-lug wheels on compatible Ford and Lincoln trucks and vans.

If you drive a 6-lug Ford F‑150, Expedition, Excursion, Transit, Navigator or similar vehicle from the 2000–2014 era and need replacement tuner-style lug nuts, these Dynofit units offer the correct 14×2.0 thread, 60° conical seat, and a compact open-end design that clears many aftermarket wheel styles. The set includes 24 high-strength one-piece lug nuts with a 19mm (3/4") hex, roughly 21mm overall height, and a durable plated finish engineered to resist corrosion under road conditions.

Will these lug nuts fit my Ford F‑150 or other 6-lug vehicle?

They fit wheels that require an M14×2.0 thread and a 60° conical (tapered) seat on six-lug hubs. These are typically used on aftermarket wheels or when spacers are installed, so confirm your original lug nut seat type before ordering.

• Thread: M14×2.0 standard pitch
• Seat: 60° conical taper
• Compatible vehicles: 2000–2014 Ford F‑150, Expedition, Excursion, Transit, Lincoln Navigator, and similar 6-lug hubs

How durable and corrosion-resistant are these Dynofit lug nuts?

Each nut is cold-forged from alloy steel for improved strength and consistency, then finished to protect against rust. Dynofit reports extended salt-spray testing beyond common industry checks to enhance longevity in wet or salted-road environments.

• Material: cold-forged alloy steel for high strength
• Finish: plated surface for rust and corrosion resistance
• Quality control: extended salt-spray testing for longer service life

What are the exact dimensions and installation notes?

These tuner lug nuts are relatively short and use an open-end style to accommodate aftermarket wheel designs and taller wheel studs. Use a hand wrench to avoid damage; avoid impact tools unless explicitly rated for alloy lug nuts.

• Overall height: about 21 mm (0.83")
• Hex size: 19 mm (3/4")
• Package: 24 pieces—enough for multiple wheels or spares

Why choose an open-end tuner lug nut rather than a closed-cup type?

Open-end tuner nuts provide clearance for extended wheel studs, custom caps, or certain aftermarket wheel designs while retaining secure seat contact. They’re favored when full closed-end nuts would interfere with wheel center caps or spacers.

• Open-end clears longer studs and certain wheel hub designs
• One-piece construction reduces failure points during installation
• Compact height fits within tight wheel pockets

Who is this for: drivers and installers replacing or upgrading lug nuts on 6-lug trucks and vans who need a compact, strong open-end nut with M14×2.0 threads and a 60° conical seat. These are suitable for owners of aftermarket wheels, vehicles with wheel spacers, and anyone seeking a corrosion-resistant replacement set in a 24-piece pack. If you’re unsure about seat type or thread fitment for your wheels, verify your vehicle’s lug nut specifications before purchase to ensure compatibility.