Euplokeer 20in Gas Strut Kit 120lb (534N) — Pair with Mounting Brackets & Screws, Ready-to-Install

Euplokeer 20in 120lb gas strut pair (GSNI-2300-120) is a ready-to-install lift support kit for doors, lids, and hatches that delivers 120 lb of push force each and includes brackets and screws for straightforward mounting.

Whether you are repairing an RV compartment, upgrading a trailer hatch, or building a custom food truck window, this two-piece gas spring kit supplies reliable, damped lifting assistance with common OEM interchange numbers for fast compatibility checking. The set contains two 20.00-inch extended gas shocks rated at 120 lb (534 N) each, two L-shaped ball-stud brackets, two flat-bottomed brackets, and 16 screws so you can mount both ends securely. Euplokeer provides straightforward installation guidance and a 15-month exchange policy for added confidence.

How do I confirm these gas struts fit my existing application?

Check three things on your original strut: the OEM interchange number(s), the required pound (or Newton) force, and the extended length measurement. If those match the GSNI-2300-120 specifications, the Euplokeer 20in 120lb assembly is a likely match.

• Compare printed or stamped cylinder numbers to the listed interchange codes (e.g., 78327, C1608055).
• Measure the fully extended length of your old strut and confirm it equals 20.00 inches.
• Verify your application needs roughly 120 lb (534 N) of lift force per strut.

What tools and parts are included, and how simple is installation?

The kit ships with two gas shocks, two L-brackets, two flat-bottomed brackets, and 16 screws—everything required for most DIY mounts. Installation requires minimal tools; often a flat-head screwdriver and a socket or wrench to fasten the ball-stud brackets are sufficient.

• Included: 2x gas struts, 2x L-brackets, 2x flat brackets, 16 screws.
• Common tools: flat-head screwdriver, socket wrench or spanner for ball studs.
• Mount orientation: attach one bracket to stationary frame and one to moving panel, then snap onto ball studs.

What applications and surfaces work best with these 20-inch gas springs?

These gas struts are designed for multi-purpose use on vehicles and light construction. Typical installations include RV doors and compartments, camper shells, trailer lids, wooden box lids, food truck windows, and small shed windows where medium lift assistance is needed.

• Vehicle use: RV doors, camper shells, truck toppers, tonneau covers.
• Custom projects: food truck windows, cabinetry, storage lids, hobby enclosures.
• Mounting: flat metal, wood, or composite panels using provided brackets and screws.

How should I choose the correct gas strut force and maintain the parts?

Match force to the weight and leverage of the panel you want to lift: heavier or longer panels need higher pound-force ratings. Maintain the gas struts by keeping mounting points clean, avoiding side loads, and checking brackets periodically for wear; do not puncture or disassemble the cylinder.

• Selection tip: use your old strut's pound rating or consult a lift-force chart for panel weight and hinge location.
• Maintenance: inspect for corrosion, lubricate ball studs lightly, and replace if leaking or bent.
• Safety: install both struts as a matched pair for balanced lifting and long life.

Who is this for? Installers, RV owners, small-fleet technicians, and DIY builders who need a dependable, mid-strength lift solution will find this Euplokeer 20-inch 120 lb gas strut pair well suited to everyday repair and customization tasks. It’s aimed at people who want an off-the-shelf replacement with familiar OEM interchange numbers, included mounting hardware, easy installation, and a clear support channel from the Euplokeer brand.