Evercoat Z-Grip Filler 0.8 Gal — Automotive High-Adhesion Body Filler, Fast Low-Clog Sanding

Evercoat Z-Grip® Filler 0.8 Gal is a high-adhesion automotive body filler designed for fast filling, low-clog sanding, and reliable bonding to steel, aluminum and fiberglass.

Built for collision repair and metalworking, Z-Grip® blends a clog-free formulation with additives that reduce heat and friction during sanding. The 0.8 gallon size gives enough volume for medium repair jobs while keeping storage and handling manageable. Its chemistry promotes adhesion to galvanized steel and aluminum, and it works well over common substrates used in auto and marine repair.

How does Z-Grip® make sanding easier and faster?

The filler contains Hattonite and other friction-reducing components to minimize heat buildup and clogging while you sand. That means you can use coarser grits like 80 to remove material quickly without frequent paper changes.

• Formulation resists clogging for longer sandpaper life
• Hattonite reduces heat and friction during sanding
• Sands effectively with 80-grit for rapid profile shaping
• Leaves a smooth, consistent surface for final feathering

Will Z-Grip® stick to galvanized steel and aluminum?

Z-Grip® is engineered for superior adhesion to difficult metals, including galvanized steel and aluminum, when surfaces are prepared correctly. Use standard cleaning, degreasing, and abrasion techniques to maximize bond strength and long-term durability.

• Unique bonding agents formulated for metal substrates
• Works over steel, galvanized steel, and aluminum when prepped
• Also compatible with fiberglass and many composite materials
• Recommended surface prep improves performance and longevity

What job types and surfaces is the 0.8 Gal size best suited for?

The 0.8 gallon container is ideal for moderate repair work: panel dents, seam filling, and small collision repairs where you need more volume than a touch-up tub but less than bulk trade packs. It suits professional shops, restoration projects, and serious DIYers handling multiple small to medium repairs.

• Panel repair and dent filling on cars and trucks
• Fiberglass patching on boats and body kits
• Restoration work on classic vehicles and metal structures
• Work requiring reliable sanding and reasonable coverage

How do I use Evercoat Z-Grip® for best results?

Prepare the surface by removing rust, oil, and loose paint, then abrade to a clean, dull finish. Mix the filler with the correct ratio of hardener, apply in thin layers, allow full cure, and sand progressively from coarse to fine grits for the desired profile.

• Clean and degrease substrate thoroughly before application
• Mix with recommended catalyst/hardener per instructions
• Apply in 1/4" or thinner lifts; build up in layers if needed
• Cure fully before sanding; start with 80-grit then refine

Who this product is for: Evercoat Z-Grip® Filler 0.8 Gal is intended for body shops, restoration specialists, and experienced DIY mechanics who need a dependable, easy-sanding filler with strong adhesion to metals and composites. Choose this size when you want a balance of usable volume and portability for repeated medium-scale repairs without frequent repurchasing.