EVERESTWAY 10" Slim Radiator Fan 10 Inch Black — 12V 80W Dual Pack, Push/Pull with Mounting Kit

EVERESTWAY's 10-inch 12V 80W slim radiator fan kit is a reversible push-or-pull dual-pack designed to improve cooling for cars, trucks, RVs and other 12V systems.

This dual-fan set combines a compact 2.36" thickness with a high airflow design to boost heat dissipation where space is limited. Each fan runs on 12 volts and draws 5–7 amps while producing up to 800 CFM and near-2400 RPM, making them suitable for many aftermarket radiator or auxiliary cooling installations. The package includes mounting brackets and cable ties so you have what’s needed for a tidy, secure fit.

How does this fan improve cooling in tight engine bays?

The slim profile lets the fan sit close to the radiator or condenser without intruding on other components, increasing airflow across core surfaces. A six-blade curved design and strong motor deliver consistent airflow to lower operating temperatures under load.

• 10" diameter with only 2.36" thickness for confined spaces
• Maximum airflow ≥800 CFM and RPM ≈2400 for steady ventilation
• Curved 6-blade geometry for efficient air movement
• 12V operation compatible with standard vehicle electrical systems

Can I install these as pushers or pullers, and why choose one mode?

Yes — the fans are reversible. They ship configured in pull mode; flip the blades and reverse the wiring to switch to pusher mode. Pullers draw air through the radiator toward the engine, while pushers force air from the engine side out through the core — select the orientation that best suits your mounting position and airflow path.

• Factory set as pullers; reversible by blade flip and wire swap
• Pull mode pulls cooler external air through the radiator core
• Pusher mode pushes air from behind the radiator for tight front gaps
• Mounting kit included to orient fans correctly for your setup

Which vehicles and setups are compatible with these 10" fans?

These fans work with most 12V systems and suit a wide array of vehicles — from passenger cars and pickups to RVs, tractors and trailers — provided the radiator or mounting area accepts a 10" fan. Compatibility depends on radiator size and available clearance, so measure before buying.

• Designed for any 12V vehicle that fits a 10" fan footprint
• Commonly used for radiators, condensers, and auxiliary oil or transmission coolers
• Mount brackets and tie straps included for universal installs
• Ideal for aftermarket upgrades, replacements, or second-fan installations

What are the electrical and mechanical specs to know before buying?

Each fan is rated 80W at 12V and pulls about 5–7 amps during normal operation. Expect a peak speed near 2400 ±10% RPM and wind speeds up to about 9.09 m/s for strong consistent airflow. Confirm your vehicle’s electrical capacity and fuse protection when adding the fans.

• Rated power: 80W per fan; operating voltage: 12V
• Amp draw: approximately 5–7 A each; plan wiring and fusing accordingly
• Max RPM ≈2400 and wind speed ~9.09 m/s for efficient cooling
• Fan thickness 2.36" and six curved blades for compact performance

Who is this for: Installers, car enthusiasts and fleet owners who need a compact, high-flow aftermarket fan for improved heat control in tight engine bays. This two-piece EVERESTWAY kit fits many 12V applications where a 10" slim fan provides a practical cooling upgrade or replacement, and includes the hardware to make mounting straightforward. If your radiator measures 10" and your vehicle uses a 12V electrical system, this set is designed to deliver noticeable airflow gains while keeping installation tidy.