FOXWELL NT630 Pro OBD2 Scanner & ABS SRS Diagnostic Tool — Black, 12V Battery Tester + Service Resets

The FOXWELL NT630 Pro is a handheld OBD2 scan tool that combines ABS/SRS/engine diagnostics with a full 12V battery tester and select maintenance services like ABS auto-bleed, BMS registration, oil reset, EPB and SAS.

The NT630 Pro upgrades the NT630 Plus by adding comprehensive battery testing and BMS registration while keeping robust ABS, SRS and OBD2 code reading and live-data features. Designed for DIYers and independent technicians, it helps pinpoint brake, airbag and starting-system issues and perform common service procedures on vehicles where these functions are supported. Software receives free Wi‑Fi updates to expand coverage and keep diagnostics current.

How does the NT630 Pro help diagnose ABS, SRS and engine warning lights?

The scanner reads and clears supported ABS, SRS and OBD2 fault codes and shows ECU information and live data to help locate the underlying cause. Use the stored codes, freeze-frame and live PID data to assess sensors, wiring or modules before replacing parts.

• Read/clear ABS, SRS and generic OBD2 codes on supported vehicles
• View live data like wheel speed and brake signals for troubleshooting
• Freeze-frame and ECU details to trace intermittent faults
• Notes: airbag crash-data resets and some module functions are not supported

What battery and electrical tests can I run with this tool?

The integrated 12V battery tester measures state-of-health (SOH), state-of-charge (SOC), CCA rating, internal resistance and voltage, and it evaluates cranking and charging performance. This helps decide whether a battery, starter or alternator is at fault.

• Supports flooded, AGM, EFB and GEL batteries from 100–3000 CCA
• Provides SOH, SOC, CCA and internal resistance readouts
• Performs cranking and charging-system tests to isolate faults
• BMS registration available on supported vehicles after same-spec battery replacement

Can the NT630 Pro perform maintenance tasks like ABS bleeding or EPB service?

Yes—on compatible vehicles the NT630 Pro offers several one‑button service functions: ABS auto bleed, BMS registration, oil reset, EPB service and SAS calibration. These functions are vehicle-dependent, so VIN-based verification is recommended before purchase.

• ABS Auto Bleed commands ABS pump and valves to help remove trapped air
• BMS registration after same-spec battery replacement (no battery coding)
• Oil reset, EPB service and SAS calibration where supported by the vehicle
• Function availability varies by Year/Make/Model/VIN—verify coverage first

What advanced tests and live-data features are included?

Beyond basic code reading, NT630 Pro can provide ABS live data and, on supported modules, run active tests such as pump or solenoid activation to further isolate hydraulic or module faults. Live PIDs vary by vehicle and ABS module.

• ABS active tests for pump/solenoid activation where supported
• Live-data PIDs for wheel speed, brake-related sensors and more
• Freeze-frame capture to review conditions when codes set
• Useful before replacing costly components to confirm failure source

Who is this tool for: The FOXWELL NT630 Pro is aimed at DIY enthusiasts, independent mechanics and small shops that need a reliable handheld scanner focused on ABS/SRS/OBD2 diagnosis plus practical 12V battery and service functions. It is ideal if you want one compact device to read & clear brake and airbag codes, test batteries and run common service procedures—provided you verify VIN-level coverage for any single advanced function. If you require full-system module programming, ECU coding or manufacturer-level advanced functions, choose a factory-level or higher-end diagnostic platform instead.