GAsupply ATV Wheel Spacers 4x110 2" (50mm) 74mm Hub Bore — 2-Pack CNC 6061-T6 Aluminum

GAsupply 4x110 ATV Wheel Spacers are 2" (50mm) CNC-machined aluminum adapters that increase track width and allow wider tires for compatible 4-lug ATVs with a 74mm hub bore.

If you need extra clearance, a wider stance, or the ability to fit larger tires on a 4×110 ATV hub, these spacers provide a straightforward bolt-on solution. Machined from 6061-T6 billet aluminum, anodized for corrosion resistance, and supplied with high-strength grade 12.9 studs, the pair is engineered for durability while minimizing added weight. They are sold as a set of two spacers and are intended only for wheels with M10×1.25 studs and hubs with a maximum 74mm bore.

Will these spacers fit my ATV with a 4×110 bolt pattern?

They are designed specifically for vehicles with a 4×110 bolt pattern and a hub bore no larger than 74mm.

• Fitment: 4×110 to 4×110 bolt pattern compatibility.
• Maximum hub bore: 74mm — do not use if your hub bore exceeds this.
• Thread pitch: requires wheels with M10×1.25 studs.
• Check your vehicle’s year/model fitment notes before ordering.

How durable and corrosion-resistant are these wheel spacers?

Each spacer is CNC machined from 6061-T6 aluminum, offering a strong yet lightweight base material. Anodized finish adds a protective layer that helps resist oxidation and wear under normal riding conditions.

• Material: 6061-T6 billet aluminum for strength and lightness.
• Finish: anodized surface to reduce corrosion and fading.
• Hardware: supplied with Grade 12.9 bolts for superior clamping strength.
• Construction: precision machining for accurate fit and balance.

What benefits can I expect after installing these 2" spacers?

Installing the 50mm spacers moves the wheel outward, increasing track width and allowing clearance for wider or higher-traction tires. They also change the vehicle’s stance for a more aggressive look and may improve stability in some off-road situations.

• Increased tire clearance for wider or larger tires.
• Wider track for improved visual stance and potential handling benefits.
• Ability to fit high-traction or custom wheels when paired with correct studs.
• Minimal added weight thanks to aluminum construction.

Are there any installation or compatibility precautions I should know?

These spacers only work with wheels that use M10×1.25 studs—do not use with 12×1.25 wheels. Proper torque, regular inspection, and keeping the hub bore within the specified limit are essential for safe operation.

• Do not use with wheel studs that are 12×1.25; only M10×1.25 fits.
• Ensure hub bore is 74mm or smaller for correct centering and support.
• Tighten hardware to manufacturer torque specs and recheck after initial rides.
• Inspect for wear, corrosion, or loosening periodically.

Who is this for? These GAsupply 2" (50mm) spacers are aimed at ATV owners who have a 4×110 bolt pattern and want to install wider tires, change the vehicle stance, or gain additional clearance without modifying suspension geometry. They suit riders seeking a durable, lightweight spacer machined to tight tolerances and supplied with high-grade studs—provided the wheel stud pitch (M10×1.25) and hub bore (≤74mm) match your setup.