GZDLMoto Swing Arm Spools for CFMOTO 675SS M10x1.25 — CNC T6061 Aluminum, Anodized Pair

These GZDLMoto swing arm spools are CNC-machined T6061 aluminum slider pins that protect the swingarm, act as stand lift points, and fit CFMOTO 675SS/675SR/675NK motorcycles with 10mm finer threads.

These spool-style swing arm sliders combine lightweight strength with corrosion-resistant anodizing to give your CFMOTO a purposeful protection point and an easy lift location for paddock stands. At 35mm diameter and 47mm tall with M10x1.25 threaded bolts, the pair installs quickly and provides both frame protection during falls and a safe, repeatable contact for maintenance stands. Each package includes two spools and the machined finish adds a visual upgrade to match your bike.

How do these spools protect my bike during a tip-over?

By creating a sacrificial contact point, the spools take impact on cast or machined aluminum instead of painted swingarm surfaces or fragile fasteners. Their rounded profile helps dissipate sliding forces while the anodized finish resists abrasion and corrosion from road contact. They reduce the chance of deep gouges or costly paint and metal damage.

• 35mm diameter provides a wide contact surface to absorb abrasion.
• CNC T6061 aluminum is tough yet lightweight to avoid adding excess mass.
• Anodized surface reduces corrosion and maintains appearance after impacts.

Will these spools support a rear paddock stand safely?

Yes — the spools offer a secure, repeatable lift point for most rear paddock stands designed to engage swingarm bobbins. Their M10x1.25 finer-thread mounting ensures a tight connection to the swingarm, and the measured height gives sufficient clearance for standard stand hooks. Use a compatible stand and check torque before lifting.

• M10x1.25 threaded bolts match common CFMOTO mounting points.
• 47mm height positions the spool for stable stand engagement.
• Sold in pairs to allow lifting and balancing both sides reliably.

How difficult is installation and what tools are needed?

Installation is straightforward and usually takes under five minutes with basic hand tools. Remove the stock bolt or bobbin, screw in the spool bolt to hand-tight and finish to recommended torque. No special modifications are required, and the kit is ready to use right away.

• Typical installation time: under 5 minutes.
• Tools: common hex/allen key or socket set, torque wrench recommended.
• Includes one pair of spools so both sides are protected immediately.

Are these spools compatible with my CFMOTO model and what sizes should I check?

These spools are designed for CFMOTO models with M10x1.25 swingarm mounting points, specifically 675SS, 675SR, 675SR-R and 675NK variants. Confirm your bike’s bobbin thread size and clearance before ordering; manual measurement may vary by 1–3mm. If your model uses a different thread pitch or mounting arrangement, select a spool designed for that specification.

• Designed for: CFMOTO 675SS / 675SR / 675SR-R / 675NK.
• Thread spec: M10x1.25 finer thread.
• Dimensions: 35mm diameter, 47mm height — check swingarm clearance.

Who is this for: Riders who maintain or store their CFMOTO 675 series bikes and want a durable, attractive swayarm protection and paddock-stand mounting solution. These spools suit track-day enthusiasts, DIY mechanics, and everyday riders who value simple, robust protection and a professional finish. If you need quick installation, corrosion-resistant material, and a matched pair that complements your bike’s styling, this set is built to deliver.