HITCH SAFE Extended Hitch Bolts for 2.5" Receivers — HS7021T 1" Longer, .650" Shaft, Rust-Resistant Pair

HitchSafe HS7021T is a pair of extended hitch bolts engineered to fit 2.5" receivers and thicker welded hitch tubes, providing the extra 1" length needed to secure a HitchSafe vault or similar accessories.

If your truck or large SUV has a thicker hitch opening that prevents standard bolts from reaching through, these HS7021T bolts give you the extra reach without modifying the receiver. They were developed to work with HitchSafe’s secure vault hardware and other accessories that require a taller bolt profile. Each bolt measures 1" longer in overall length with a .650" shaft diameter and a rust-resistant finish to resist outdoor corrosion.

Will these bolts fit my vehicle's receiver and HitchSafe vault?

HS7021T bolts are intended for 2.5" receivers and vehicles that need an additional 1" of length compared with standard bolts. They are commonly used on Toyota pickups (2002–2021), large SUVs, and industrial trucks. Confirm your receiver thickness and hole alignment before purchasing.

• Overall extra length: 1" (extended model)
• Shaft diameter: .650" for heavy-duty fit
• Designed for 2.5" receivers and thicker-weld applications
• Not compatible with Toyota Pickup models 2022 and newer

How do these bolts work with the HitchSafe Vault system?

These bolts pair with the HitchSafe vault (sold separately) to secure the vault inside your receiver without leaving a vulnerable exposed lock. The extended length lets the bolt clear thicker receiver walls so the vault can sit flush and lock reliably. Installation is straightforward with standard tools.

• Uses existing hitch pin holes—no drilling required
• Creates a 100% metal locking point when combined with the Vault
• Rust-resistant finish for outdoor durability
• Vault unit must be purchased separately

What are the precise dimensions and material details?

HS7021T bolts have been manufactured to specific tolerances so they fit heavier-duty receivers and thicker welds. The extended profile (marked by the 'T' for "Tall") replaces standard .75" bolts plus spacer combinations when those are too short for your setup. Materials and finish optimize strength and weather resistance.

• Overall extension: 1" additional length
• Shaft diameter: .650" (heavy-duty)
• Finish: rust-resistant coating for exterior use
• Sold as a pair to secure both sides of the vault or accessory

How simple is installation and what tools do I need?

Installing the HS7021T bolts is a quick process that requires only common hand tools. Remove your existing hitch pin or bolt, slide the extended bolt through the accessory and receiver, then secure with the included locking mechanism or nut. Check fit before final tightening to ensure alignment and clearance.

• Tools: basic wrench or socket set recommended
• Typical install time: under 10 minutes per bolt pair
• Verify receiver thickness and hole alignment prior to installation
• No welding or permanent changes to the receiver required

Who is this for: The HS7021T is built for truck owners, fleet operators, and outdoor enthusiasts who have thicker-weld or larger 2.5" hitch receivers and need an extended bolt to secure a HitchSafe vault or heavy-duty accessory. Choose these bolts if standard hardware fails to reach through your receiver or if you want a stronger .650" shaft for long-term outdoor use.