Jackery 12V Charging Cable — Cigarette Lighter to Alligator Clamps, 12V/10A UL‑Certified 16 AWG Copper

Jackery's 12V Automobile Charging Cable converts a vehicle cigarette-lighter socket into a safe, 12V/10A connection with alligator clamps so you can recharge compatible Jackery power stations from a car battery. This compact cable provides a quick and reliable way to top up most Jackery solar generators and portable power stations when mains power or solar panels aren't available. It is specifically engineered for 12V lead-acid batteries and works with every Jackery generator model except the Explorer 160. The cord uses 16 AWG, 100% copper wire, UL-certified insulation, and a comfortable molded handle for secure, everyday use.

How fast will this cable recharge my Jackery power station from a car?

Charge times depend on the battery capacity you're drawing from and the generator's input acceptance. Typical guidance: a 40–60Ah lead-acid battery can provide enough current to recharge a compatible Jackery unit in roughly 15–20 minutes; a 60–100Ah battery commonly takes about 30–40 minutes. Actual times vary with the vehicle's alternator output, battery state of charge, and model-specific input limits.

• 40–60Ah battery: ~15–20 minutes to deliver recommended charge for starting.
• 60–100Ah battery: ~30–40 minutes under similar conditions.
• Charging rate: 12V/10A maximum, subject to generator input specs.
• Performance influenced by alternator health and cable connections.

Which Jackery models and battery types are compatible?

This cable is designed to work with all Jackery solar generators and portable power stations except the Explorer 160. It's intended only for use with 12V lead-acid batteries and like-for-like 12V systems. It is not suitable for electric vehicle (EV) battery systems or high-voltage lithium EV packs.

• Compatible: most Jackery power stations (except Explorer 160).
• Battery type: 12V lead-acid only (12V/10A).
• Not compatible with electric cars or high-voltage EV systems.
• Check your generator's input ratings before use.

Is this cable safe and easy to use for roadside or campsite charging?

Safety is improved with UL-certified insulation, fully insulated clamps with no exposed metal, and 100% copper conductors to reduce voltage drop. The molded handle and intuitive cigarette-lighter plug make setup straightforward: connect the alligator clamps to the vehicle battery and plug the cigarette-lighter end into the car's socket. Observe correct polarity and avoid attaching clamps to damaged terminals.

• UL-certified insulation and no exposed metal for safer handling.
• 16 AWG copper wire for reliable conduction and reduced heat.
• Molded handle on clamps for firm grip and easier connection.
• Simple plug-and-play cigarette lighter interface for fast setup.

What limitations and precautions should I know before using it?

The cable supports up to 12V/10A and is designed for lead-acid batteries only—do not use it with electric vehicles. Avoid extended high-current draws that could overheat the cigarette-lighter circuit or the cable; use the cable as intended for temporary recharging or emergency top-ups. Always inspect clamps and wiring for damage before each use and ensure a secure, corrosion-free connection.

• Maximum rating: 12V/10A—do not exceed this specification.
• Not for EV batteries or high-voltage systems.
• Intended for short-term or emergency charging, not continuous high-current use.
• Inspect for wear, secure polarity, and avoid corroded terminals.

Who is this for? This cable suits outdoorspeople, van lifers, and anyone who needs a quick, portable method to recharge Jackery power stations from a vehicle while camping, traveling, or during a power outage. It’s best for users with 12V lead-acid vehicle batteries who need a compact, UL-certified accessory to extend the usefulness of their Jackery generator off-grid. If you have an Explorer 160 or rely on EV charging systems, this cable is not appropriate.

FAQ

Q: Can I use this cable with an electric car?

A: No. This cable is for 12V lead-acid batteries only and is not compatible with electric vehicle battery systems.

Q: Will it work with my Jackery Explorer model?

A: Yes for most models, but it is not compatible with the Jackery Explorer 160. Check your model's input specs first.