KOCHCHEMIE P6.02 ONE Polishing Compound 1L — One-Step P2000+ Cut & High-Gloss Seal

KOCHCHEMIE P6.02 ONE is a one-step machine polishing compound that removes P2000+ scratches while leaving a durable, high-gloss seal.

Designed for workshop pros and careful car owners, this 1-liter polishing compound blends cutting power with sealant properties so you can correct paint defects and restore shine in a single operation. Formulated with carnauba wax and non-volatile silicones, P6.02 ONE is optimized for rotary and dual-action polishers and is safe on automotive paintwork — not on painted plastics or rubber. It targets grit marks, light scratches and grinding defects without the need for multi-stage compounds or separate sealers.

How quickly will this polish remove sanding marks and scratches?

P6.02 ONE is engineered as a single-step solution that efficiently eliminates sanding and polishing marks from a grit size of P2000 and finer. It balances abrasive particles with fillers and polishing oils to clear defects while refining the finish.

• Works on P2000 or finer sanding marks and light swirl marks.
• Removes common polishing defects in one machine pass when used correctly.
• Formulated to minimize heat and dust during mechanical polishing.

Will it leave a lasting high-gloss finish and protection?

Yes — the formula contains carnauba wax plus non-volatile silicones that bond to the paint surface, giving immediate gloss and a short-term sealing effect. While it improves appearance and hydrophobicity, long-term protection should be achieved with a dedicated sealant or wax topping.

• Delivers brilliant wet-look gloss straight from the polisher.
• Non-volatile silicones add temporary fill and water beading.
• Compatible as a base before applying long-lasting ceramic or polymer sealants.

Which machines, pads and surfaces are best for P6.02 ONE?

Use this compound with rotary or dual-action polishers for controlled cutting and finishing. Choose medium to soft foam pads to balance abrasion and surface refinement; firmer pads increase cut but may raise heat and risk on thin clearcoats.

• Works with rotary and DA polishers — adjust speed to panel condition.
• Recommended pads: medium cutting foam to soft finishing foam.
• Safe on automotive paint, commercial vehicles and motorcycles; avoid painted plastics and rubber.

How do I apply P6.02 ONE for best results?

Start on a clean, dry surface and test on an inconspicuous area to confirm cut level. Apply a few pea-sized drops to the pad, spread at low speed, then increase speed for short, overlapping passes until defects are removed and the gloss appears. Wipe residue with a clean microfiber and inspect under good light.

• Test patch first to verify compatibility and cut-intensity.
• Use controlled pressure, short passes and inspect frequently.
• Remove residue with a soft microfiber towel; follow with a long-term sealer if desired.

Who is this for: KOCHCHEMIE P6.02 ONE is aimed at professional detailers, bodyshop technicians and advanced DIYers who need a reliable one-step polish to correct fine sanding marks and light scratches while producing a showroom gloss. If you require multi-stage compounding for deep scratches, or need products safe on painted plastics, choose a different dedicated product or follow with compatible plastic-safe treatments. For clearcoat paint on cars, trucks and motorcycles where speed, consistent results and a sealing boost matter, P6.02 ONE delivers a practical, workshop-grade solution.