KWGARCIIT CCS1 to CCS2 EV Adapter — 500A DC 1000V fast-charge converter, IP54 weather-resistant

KWGARCIIT CCS1 to CCS2 EV Adapter converts a CCS1/DC or J1772 fast-charging plug to fit CCS2/IEC62196 vehicles, supporting up to 500A DC (1000V) and AC 32A for rapid charging.

This compact converter bridges North American CCS1/J1772 chargers and European-style CCS2 vehicles so you can access high-power charging without swapping cars or chargers. Built for heavy use, the adapter combines high-current conductors, flame-retardant housing, and weather resistance so owners, fleets, and installers can rely on it during travel or daily operations.

How fast will this adapter charge my CCS2 EV?

The adapter supports DC charging up to 500A at 1000V and AC up to 32A, enabling high-power sessions when paired with a compatible CCS1 fast charger and vehicle inlet. Actual charge speed depends on your car's onboard charging capabilities, the charger's output, and conditions such as temperature and battery state of charge.

• DC capability: up to 500A and 1000V for rapid replenishment
• AC compatibility: up to 32A for lower-power modes
• Real-world rate limited by vehicle and charger communication

Is this adapter safe and weather-resistant for frequent use?

Safety features are engineered into the design — the housing meets UL94 V-0 flame-retardant standards, and the unit has built-in overcurrent, overheat, and short-circuit protections. An IP54 rating gives splash and dust resistance suitable for outdoor charging in most conditions, while tested electrical contacts and durability cycles reduce failure risk.

• UL94 V-0 flame-retardant housing for safer operation
• Integrated protection: overcurrent, overheating, short-circuit
• IP54-rated for dust and water spray resistance during outdoor charging

Will this adapter physically fit my car and chargers?

The adapter is designed to mate CCS1/J1772 plugs to CCS2 (IEC62196) inlets, covering the standard pin layouts used by these systems. It is intended for use with vehicles and chargers that follow the CCS1 and CCS2 specifications; always confirm plug types and vehicle manufacturer guidance before use.

• Connector types: CCS1/J1772 input to CCS2 output (IEC62196)
• Meets standard pin alignment for compatible EVs and chargers
• Verify vehicle inlet and charger protocol support prior to charging

How durable and portable is the adapter for travel or fleet use?

The body is molded from PA66 with fiberglass reinforcement and uses copper-alloy pins with silver plating for reliable conductivity and wear resistance. The adapter has been cycled through over 10,000 insertion/removal tests, operates from -40°C to 85°C, and ships with a storage box for secure transport and stowing in vehicles.

• Materials: PA66 fiberglass housing and silver-plated copper-alloy pins
• Longevity: 10,000+ insertion/removal cycles tested
• Operating range: -40°C to 85°C and includes a storage box

Who this is for: Drivers who need to use CCS1 or J1772 charging infrastructure with CCS2-equipped vehicles, fleet operators standardizing charging hardware across regions, and EV service providers who require a rugged, high-current adapter. If you need cross-standard compatibility with fast-charging capability, this adapter delivers a compact, safety-focused solution — but always confirm compatibility with your vehicle and charging station specifications before use.