Malco Super Duty Heavy Cut Compound 32 oz — Rapidly Removes P1500+ Scratches, High-Gloss Finish

Malco Super Duty Heavy Cut Compound is a 32 oz professional-grade cutting compound that rapidly removes heavy P1500-or-finer sand scratches, oxidation, and surface defects from clear coat and gel coat finishes while leaving a high-gloss result.

Whether you're a detailer, body-shop technician, or a hands-on car owner restoring a neglected finish, this heavy-cut formula is engineered to attack deep defects without excessive heat buildup or hazing. Made in the U.S.A., the product balances aggressive abrasiveness with finishing clarity so you can correct heavy damage then refine to gloss with fewer steps.

How quickly does this compound remove heavy scratches and oxidation?

Malco Super Duty is formulated for ultra-fast compounding action designed to tackle P1500 grit and finer sand scratches and typical oxidation layers. It cuts aggressively on both automotive clear coats and marine gel coats so you spend less time reworking the same area.

• Removes P1500-or-finer sand scratches efficiently
• Works on clear coat, single-stage, and gel coat surfaces
• Reduced dwell time compared with moderate-cut polishes

Will it leave a glossy finish or require additional polishing?

Although this is a heavy-cut compound, it’s formulated to leave a high-gloss surface that reduces the number of follow-up steps. Many users find one pass with the compound followed by a light finishing polish or foam pad produces showroom-level clarity.

• High-gloss result out of the compounding stage
• Compatible with finishing polishes for mirror-like shine
• Minimizes leftover haze when used with the right pad

What tools and pads should I use for best results?

For optimal performance, pair Malco Super Duty with a high-quality cutting pad. Malco recommends a 100% twisted white wool cutting pad on a variable-speed rotary or dual-action polisher for maximal cut and control. Always start at lower speeds and increase only as needed to control heat buildup.

• Recommended: Malco twisted white wool cutting pad
• Use a rotary or DA polisher; control speed to avoid overheating
• Follow with a finishing foam or microfiber pad for refinement

Is Malco Super Duty safe for modern clear coats and shop use?

Yes — the compound is formulated to be clear-coat safe and is suitable for professional body shop environments. It’s VOC-compliant and designed to remove defects without compromising gloss or the clear layer when used properly.

• Clear coat safe for automotive finishes
• Also appropriate for gel coat on boats and marine surfaces
• Body-shop safe and VOC compliant for commercial use

Who is this for: Malco Super Duty Heavy Cut Compound is aimed at automotive detailers, collision repair shops, marine restorers, and dedicated car enthusiasts who need an efficient, professional-grade solution for heavy paint correction. If you regularly encounter deeper sand scratches, moderate oxidation, or need to restore worn finishes quickly while retaining gloss, this 32 oz heavy-cut formula gives you the cutting power and finishing clarity to get the job done with fewer passes.