Nanoskin AUTOSCRUB 7" Surface Prep Towel — Medium decontamination pad, reusable polymer, faster than clay

The Nanoskin AUTOSCRUB 7" Surface Prep Towel is a reusable rubber-polymer decontamination pad that removes bonded paint contaminants faster and more cleanly than traditional clay bars.

Nanoskin designed the AUTOSCRUB to simplify prep work before polishing, waxing, or coating. Using a formulated rubber polymer, this 7-inch towel lifts overspray, rail dust, water spots, fresh tree sap and other bonded debris from paint, glass, plastic and trim without the constant reshaping required by clay bars. It can be worked by hand or with a dual-action orbital polisher, rinsed clean if it picks up grit, and reused many times for a quicker, cleaner finish.

How does AUTOSCRUB compare to a traditional clay bar?

Unlike clay that needs folding and eventual replacement, the AUTOSCRUB is a durable rubber polymer that stays effective longer and requires far less handling. It glides over surfaces, collecting contaminants in its textured matrix, and can be rinsed to restore performance. This reduces downtime and consumable cost during preparation steps.

• Works up to 3× faster than many clay bars
• Lasts up to 10× longer, lowering per-use cost
• No folding or reshaping; rinse and reuse
• Safer handling with reduced risk of marring when used with lubricant

Can I use AUTOSCRUB on different vehicle surfaces?

Yes — the medium-grade AUTOSCRUB is formulated for both light and dark paints and also works on glass, plastic, metal and trim when used with the correct lubricant. It removes bonded fallout and contaminants without aggressive abrasion, making it suitable for a wide range of exterior surfaces prior to correction or protection steps.

• Safe on automotive paint, glass, moldings and plastics
• Effective against overspray, rail dust, brake dust and sap
• Use with a recommended clay-lube or detail spray for best glide
• Available in multiple formats for different tasks and machines

How do I use and maintain the AUTOSCRUB pad?

Use the AUTOSCRUB by hand or with a dual-action polisher, always pairing it with a lubricant to prevent surface friction. When it becomes loaded with contaminants or if dropped on the ground, simply rinse the pad under water to clear trapped debris and continue working. Proper rinsing preserves the pad’s texture and extends service life.

• Spray lubricant on a panel, then work the pad in overlapping passes
• Rinse thoroughly after heavy use or if grit is visible
• Allow to air dry before storing to maintain the polymer matrix
• Do not use on heated surfaces; keep pad clean to avoid scratching

Will AUTOSCRUB affect my paint correction or coatings?

Using the AUTOSCRUB is a preparatory step intended to improve the results of downstream processes like polishing, waxing and ceramic coatings. By removing bonded contaminants first, abrasives and protective products make better contact with the clear coat, helping those treatments perform as designed. It’s not a polish itself, but a surface prep tool that helps subsequent products work more efficiently.

• Decontaminates so polishes and coatings bond more uniformly
• Reduces the need for aggressive compounding caused by embedded fallout
• Complements paint correction rather than replacing it
• Helps achieve cleaner final gloss and longer protection life

Who is this for: The Nanoskin AUTOSCRUB 7" Surface Prep Towel is made for detailers, DIY enthusiasts and professional shops that want a faster, reusable alternative to clay bars. It suits anyone preparing vehicles for polishing, sealing or coating who needs a dependable decontamination tool that cuts labor time and ongoing costs while working safely across multiple exterior surfaces.