Nilight 2" Trailer Hitch Extension — 5/7/9" Adjustable Reach, 2" Rise/Drop, 7,500 lb Capacity

Nilight's 2-inch trailer hitch extension adds up to 9 inches of adjustable rise or drop while supporting up to 7,500 lb GTW for safer, leveled towing.

This heavy-duty hitch extension is designed to adapt standard 2" receivers so you can align the tow bar, trailer ball mount, or accessory with your vehicle's hitch height. Built from solid steel with full-edge welds, enhanced corrosion protection, and stainless mounting hardware, the extension lets you change the effective hitch length to 5", 7", or 9" and correct a 2" rise or drop. It ships with improved fasteners and an extra clip to minimize movement and increase reliability when hauling trailers, bikes, or cargo carriers.

How does this extension change my towing setup?

Install the Nilight extension into any industry-standard 2" receiver to move your hitch point outward and adjust vertical alignment. Adjust the shank to one of three insertion positions to create a 5", 7", or 9" reach while providing a 2" rise or drop to level your trailer or accessory relative to the vehicle.

• Three shank holes provide 5", 7", and 9" length options when seated in the receiver.
• 2" rise/drop corrects mismatched vehicle and trailer heights for safer towing geometry.
• Works with ball mounts, bike racks, cargo carriers, and base plates.

Is it strong enough for my trailer or accessories?

The extension is manufactured from solid steel and rated for a gross towing weight up to 7,500 pounds with a combined tongue weight limit of 400 pounds. Full-edge welds, a durable black powder coat over electrophoresis pretreatment, and stainless hardware improve longevity under heavy use.

• 7,500 lb GTW capacity and 400 lb tongue weight limit for a wide range of tows.
• Solid steel body instead of hollow construction for superior strength.
• Electrophoresis plus powder coat to resist rust, UV, and road grime.

How does it reduce movement, rattle, and corrosion?

Nilight includes stainless bolts and flange nuts that lessen pin travel and improve the fit between the extension and receiver. The package also provides an extra clip and is compatible with hitch tighteners (sold separately) so you can minimize play and squeak during transit.

• Stainless fasteners and flange nuts reduce loosening and galling over time.
• Extra clip doubles protection against accidental disengagement while towing.
• Compatible with aftermarket hitch tighteners to further eliminate rattle.

Will this extension fit my vehicle and accessories?

It fits any standard 2" receiver and accepts the same hitch-pin locations used by common ball mounts and accessories. Because length and vertical offset are adjustable, it suits many towing combinations, but always verify tongue weight and receiver ratings before towing.

• Designed for standard 2" trailer hitch receivers common on trucks and SUVs.
• Adjustable insertion positions to match accessory mounting points.
• Check both vehicle and accessory ratings; do not exceed the lower limit.

Who is this for? This Nilight hitch extension is intended for truck and SUV owners who need to correct hitch height, extend reach, or improve fit for bikes, cargo carriers, ball mounts, and small trailers. It’s a good choice for users who want solid-steel construction, corrosion resistance, and improved hardware to reduce noise and movement while towing. If you require more than the stated GTW or tongue weight, or if your receiver is a non-standard size, consult a professional before use.