Partsam 5x7 (7x6) LED Sealed-Beam Headlights H6054 H4 Plug-2PCS — Hi/Low, 5000–6000K Cool White

Partsam 2PCS 5x7 (7x6) LED sealed-beam headlights replace standard H6054/H5054 units with integrated hi/low beams and a plug-and-play H4/9003 connector for many trucks, SUVs, and Jeeps.

These aftermarket LED headlamps are designed to fit vehicles that use the 7x6 (often called 5x7) sealed-beam form factor. They combine modern LED output with a durable aluminum shell and an integrated heatsink, offering a long service life and a straight swap-in installation for compatible housings. The lamps provide separate high- and low-beam output from a single unit, and are built to match common factory mounting and plug types so most installations require minimal modification.

Will these headlamps fit my vehicle?

Partsam LED headlight units are made for the 7x6 sealed-beam size and are compatible with many factory housings that accept H6054/H5054 or equivalent part numbers. They are intended to fit a wide range of older and specialty vehicles as well as some motorcycles and off-road rigs.

• Fits H6054, H6054LL, 6054, H5054, H6052, 6052, 6053 and similar
• Common fits: 86–95 Jeep Wrangler, Cherokee XJ, S10, Blazer, Express Van, many trucks
• Confirm your vehicle uses a 7x6 (5x7) sealed-beam headlight before purchasing

How bright are these LEDs and what is the light color?

Each lamp uses multiple high-power LEDs to deliver distinct low- and high-beam outputs that prioritize road illumination and distance. Color temperature is in the cool white range for clear contrast and nighttime visibility without heavy yellowing.

• High beam: about 5,600 lumens per lamp
• Low beam: about 2,500 lumens per lamp
• Color temperature: roughly 5000K–6000K for crisp white light

How difficult is installation and are wiring changes needed?

These are designed as plug-and-play replacements for H4/9003-style connectors on compatible vehicles, which allows most users to swap them in without cutting wires. Some older or specific makes (for example certain Toyotas) may use a different pin arrangement or dual-ground setup; in those cases simple pin re-arrangement or an H4 relay harness will resolve the issue.

• Designed for H4/9003 plug compatibility in most vehicles
• Toyota dual-ground or unique pinouts may require re-wiring or relay harness
• Search Partsam H4 9003 relay harness for retrofit instructions

What are the build and reliability details?

The housings are machined aluminum with integrated heatsinks and a PMMA lens to balance strength and optical clarity. The LEDs are rated for long life, and the sealed-beam design helps protect internal components from moisture and dust in demanding environments.

• Aluminum shell with heatsink for thermal management
• PMMA lens material and sealed-beam construction
• 15 high-power 3W LED chips; estimated life up to 50,000 hours

Who is this for: These Partsam 7x6 LED sealed-beam headlamps suit drivers restoring classic vehicles, upgrading older trucks and SUVs, or adapting off-road rigs that use the 5x7 sealed-beam standard. They are best for owners who want a brighter, cooler white beam with a long-lived LED platform while keeping a mostly factory installation process. Verify your vehicle’s headlight size and connector type before ordering to ensure compatibility.