Racewill Exhaust Heat Shield 6in x 24in Titanium Pipe Shield — Double-Layer Insulation, Gloves Included

Racewill Titanium Pipe Shield 6" x 24" is a flexible, double-layer exhaust heat shield that reduces surface temperatures and directs heat away from nearby components.

Built for motorcycles, ATVs, custom exhausts and any application with cylindrical ducting, this 6" x 24" titanium-faced shield combines a high-temperature outer skin with an insulated inner layer to manage extreme heat. The shield's design creates an air gap for added cooling, and the included hardware — a wide hose clamp and reinforced rivets — makes mounting on round or irregular pipes straightforward. Gloves are included and recommended for safe handling during installation.

How does the Racewill shield lower surface temperatures?

The Racewill shield uses a double-layer system: a titanium outer face that reflects radiant heat and an inner silica-rich fabric that resists conduction. A spacer bracket maintains an air gap between the shield and pipe, increasing convective cooling so the visible surface runs cooler than the bare exhaust.

• Titanium outer layer reflects heat and withstands high temperatures
• Silica inner lining limits heat transfer to nearby parts
• Spacer bracket creates an insulating air gap for added cooling

Will it fit my exhaust or custom pipe shapes?

This shield is made to be flexible and adaptable, wrapping around round, oval or slightly irregular pipes. The 3.5" wide hose clamp is removable and repositionable, letting you cinch or loosen the shield to match pipe diameter and contour.

• Flexible construction conforms to many pipe profiles
• Universal clamp adjusts diameter for snug fitment
• Trim or overlap sections as needed for custom installations

What hardware and durability features are included?

Racewill improved the rivet assembly by adding washers under the rivet heads to prevent breakage and loosening over time. The shield also ships with a beefy hose clamp for secure mounting, and the materials are rated for sustained high-temperature exposure.

• Washer-backed rivets resist pull-through and loosening
• Heavy-duty removable hose clamp for secure attachment
• Materials engineered for repeated heat cycles up to 1350°F

How should I install and maintain the heat shield safely?

Wear the included gloves during handling and installation to protect from sharp edges and residual heat. Position the shield with the titanium face outward, secure the clamp, and verify clearance from moving parts. Occasional inspection of rivets and clamp torque will maintain long-term performance.

• Use included gloves to avoid burns and abrasions during install
• Mount titanium side outward and maintain air gap where possible
• Check fasteners periodically and tighten as necessary

Who is this for: The Racewill Titanium Pipe Shield 6" x 24" is aimed at riders, mechanics and fabricators who need a lightweight, durable way to protect wiring, hoses, bodywork and nearby components from exhaust heat. It suits DIY installers, custom-build shops and performance enthusiasts who want a versatile shield that’s simple to fit and built to handle high temperatures.