RANSOTO Control Arm Bushing Kit for Polaris Sportsman 1996–2018 — 28pc long & short direct-fit, restores tight steering

RANSOTO's 28-piece control arm bushing kit replaces worn front and rear A-arm bushings on Polaris Sportsman models from 1996–2018 to restore tighter steering and reduce suspension noise.

If your Polaris Sportsman feels loose in the front end, squeaks over rough terrain, or shows early tire wear, worn A-arm bushings are a common culprit. This comprehensive RANSOTO kit supplies both long and short bushings plus lower control arm sleeves so you can refresh the entire chassis pivot system in one maintenance session. Each component is designed as a direct-fit replacement for many OEM numbers and built from durable, low-friction materials intended for off-road use.

Which Polaris models and years does this kit fit?

This set is engineered for a broad range of Polaris Sportsman ATVs spanning model years 1996 through 2018, including 335, 400, 450, 500, 570, 800, and ETX variations. Fitment depends on your machine's A-arm configuration (front or rear), so check your model specifics before ordering. The kit covers common OEM bushing variants to reduce compatibility guesses.

• Compatible models: Sportsman 335, 400, 450, 500, 570, 800, ETX (1996–2018)
• Includes pieces for both front and rear A-arms where applicable
• Designed to replace multiple OEM part numbers for broad fitment

What comes in the 28-piece kit and how will it help my ATV?

The kit contains 8 lower control arm bushings plus 20 long and short A-arm bushings to fully address pivot wear across both axles. Replacing all worn bushings at once restores original alignment tolerance, reduces play in steering, and eliminates clunks and squeaks caused by degraded factory components. The comprehensive approach prevents mismatched new/old parts that accelerate uneven wear.

• Contents: 28 total bushings—8 lower control arm sleeves and 20 A-arm long/short bushings
• Restores chassis tightness for improved handling and predictable steering
• Reduces suspension noise and prevents premature tire wear

What materials are used and how durable are these bushings off-road?

RANSOTO uses high-grade, wear-resistant materials with self-lubricating properties to outperform original plastic bushings. The construction resists abrasion from mud and grit and tolerates water exposure better than many stock options. While not a lifetime part, these bushings are built for extended service intervals under typical off-road conditions.

• Made from premium self-lubricating, impact-resistant polymer
• Engineered to withstand mud, water, and repeated heavy loads
• Lower maintenance: reduced need for constant greasing

How difficult is installation and what should I prepare?

Installation requires basic mechanical tools and some ATV disassembly to access A-arms and control arm pivots. Pressing out old bushings and pressing in new ones is straightforward with a bench-mounted or hydraulic press; specialty tools can speed the job. If you prefer, a competent ATV shop can perform the swap using this all-inclusive kit.

• Prepare a press or bushing driver set, hand tools, jack stands, and lubricant
• Expect several hours for a DIY job depending on experience and tools
• Bring the kit to a professional if you lack pressing equipment

Who is this for: This RANSOTO 28-piece bushing kit is aimed at Polaris Sportsman owners and mechanics who want a full suspension pivot refresh without hunting down individual parts. It suits riders restoring older machines, preparing ATVs for heavy trail use, or addressing steering looseness and suspension noise. The kit simplifies maintenance by including all the common A-arm and lower-control-arm bushings needed for many Sportsman model years.