RUNBAITOO 6-inch Oval LED Trailer Tail Lights - Red, 2-Pack, Dual-Brightness Waterproof

These RUNBAITOO 6-inch oval red LED tail lights are a waterproof, dual-brightness stop/turn/brake and tail lamp pair designed for 12V vehicles.

Built to replace or upgrade conventional incandescent lights, this two-piece set uses ten high-intensity SMD LEDs per lamp and a sealed ABS housing with a polycarbonate lens to resist moisture, dust, and impact. The units provide two brightness levels — lower intensity for running/tail lights and higher intensity for braking and turn signaling — and come with self-tapping screws for surface mounting. They are hardwired (not plug-and-play) and compatible with a wide range of trucks, trailers, RVs, boats, buses, and agricultural equipment.

How bright are these LEDs and how do the dual brightness modes work?

Each lamp contains 10 SMD LEDs that switch between low and high output depending on the function. The low-intensity mode serves as the tail/running light, while the high-intensity mode activates for brake and turn signals, improving visibility to following drivers.

• 10 SMD LEDs per unit for clear illumination
• Low brightness for continuous tail light use
• High brightness for brake and turn signaling
• Designed to be visible both day and night

What wiring and installation steps should I expect?

These lights are hardwired and use a three-conductor system: white for ground, red for brake/high-brightness, and black for tail/low-brightness. The package includes eight self-tapping screws for surface installation; you will need a drill/driver and basic wiring tools to complete the connection.

• White = ground, Red = brake/high beam
• Black = tail/low beam
• Includes 8 self-tapping screws for metal surface mounting
• Requires drilling and wire splicing; not a plug-and-play harness

Are these lights durable and weather-resistant?

The housing is molded from ABS with a polycarbonate lens and sealed by ultrasonic welding to keep out water, dust, and shocks. That construction helps them hold up to road vibration, rain, and occasional splashes on trailers or boats.

• ABS housing for impact resistance
• PC (polycarbonate) lens for clarity and strength
• Ultrasonic welded seal for waterproofing
• Rated for outdoor, commercial, and recreational environments

What vehicles and situations are these lights best suited for?

They work with standard 12V electrical systems and are appropriate for trucks, utility trailers, RVs, campers, buses, tractors, dump trucks, and work trailers. Use them when you need a compact oval fixture with strong stop/turn visibility and rugged weather protection.

• Compatible with 12V systems on trucks and trailers
• Good for RVs, boats, buses, and farm equipment
• Ideal replacement for worn incandescent tail lights
• Compact 6-inch oval fits many mounting locations

Who this is for: Drivers and fleet managers who want a low-profile, weatherproof LED tail light that improves signalling visibility without complex retrofitting. This product suits DIY mechanics replacing old lamps, owners of trailers and RVs upgrading lighting for safety, and commercial operators seeking durable, maintenance-light fixtures. The kit includes two oval LED lights and eight self-tapping screws; expect a straightforward surface-mount installation and a standard 12V wiring hookup.