Saree 3500 lb 5x4.5" 5-Bolt Trailer Hub Kit — 2-Set Complete Assemblies for Tapered Spindles, Coated & Bearing-Ready

Saree 3500lb 5-bolt (5×4.5") trailer hub kit supplies two fully equipped, rust-resistant hub assemblies engineered for 1-1/16" to 1-3/8" tapered spindles.

Replace worn hubs with this complete two-set kit from Saree built to match common 3,500 lb axle applications. Each set is manufactured to a high U.S. industrial standard using gray cast iron, factory-coated finishes and precision bearings so you receive a ready-to-install assembly. The kit bundles all mounting and sealing parts — from bearings and grease seals to lug nuts and dust caps — eliminating trips to the parts store and reducing installation time.

Will this hub kit fit my trailer axle?

This 5×4.5" hub kit is designed specifically for tapered spindles with 1-1/16" outer cone bearings (L44649) and 1-3/8" inner cone bearings (L68149). It is compatible with many popular 3,500 lb axle brands that use tapered spindle designs.

• Fits 5×4.5" bolt pattern, 5-lug wheels.
• Designed for L44649 (outer) and L68149 (inner) bearings.
• Works with tapered spindles — not for straight spindles.
• Compatible with Dexter, Al-Ko, Lippert-style 3,500 lb axle models.

What components and hardware are included in the two-set package?

Each purchase contains two complete hub assemblies and the full complement of installation hardware so you can service both sides of an axle or a tandem-axle trailer. Parts are sized to standard trailer specifications to simplify replacement work.

• 2 hub assemblies (5×4.5" bolt pattern) — two-piece packaging inside outer box.
• 2 L44649 outer bearings and 2 L68149 inner bearings.
• 10 lug nuts (1/2"-20), 4 galvanized dust caps, 2 grease seals (OD 2.56", ID 1.72").
• 2 castle nuts, 2 washers (ID 1"), 2 cotter pins and installation hardware.

How does the kit resist corrosion and wear over time?

Saree applies a protective finish and tests components to resist rust and surface damage, giving longer usable life in road and coastal environments. Critical wear parts are heat-treated and selected for strength to reduce breakage and friction-related failures.

• Black coated hub bodies with 96-hour salt spray resistance testing.
• Galvanized dust caps for improved corrosion protection and wear resistance.
• Hardened lug nuts rated to a 10.9 specification to reduce fracture risk.
• High-quality bearings to lower noise and reduce friction on the spindle.

How simple is installation, and what should I check after fitting?

Installation follows standard hub-and-bearing replacement steps; the kit contains all required parts to complete the job. After installation, torque lug nuts correctly, set proper bearing pre-load, and inspect seals and dust caps for a tight fit to prevent leakage.

• Includes castle nuts, washers, and cotter pins for secure spindle retention.
• Grease seals and dust caps included to protect bearings from contaminants.
• Torque lug nuts to vehicle/wheel manufacturer spec and recheck after initial miles.
• Verify tapered spindle fit — do not attempt on straight spindles.

Who is this for? This Saree two-set hub kit is intended for trailer owners, DIY mechanics and fleet operators who need a reliable, cost-effective replacement for 3,500 lb tapered-spindle axles. It suits boat trailers, utility trailers, campers and small equipment trailers that use a 5×4.5" bolt pattern and L44649/L68149 bearings. If you want a boxed, ready-to-install solution with corrosion-resistant finishes and hardened mounting hardware, this kit provides a practical, all-in-one option. If your trailer uses a straight spindle or a different bearing specification, verify spindle and bearing dimensions before purchase.