SEM Solve automotive panel cleaner — 14.75 oz concentrated solvent for pre-paint prep, fast-evaporating, residue-free

SEM 38373 Solve is a professional virgin solvent blend designed to thoroughly clean automotive panels before repair and refinishing.

When you need a surface free of contamination prior to bonding, priming or painting, SEM Solve offers a powerful, fast-acting clean without leaving residues that interfere with adhesion. Formulated for body shops and DIY restorers, this concentrated solvent removes common contaminants that compromise finish quality and helps establish a consistent base for subsequent coatings.

What types of contaminants does SEM Solve remove?

SEM Solve targets materials that commonly remain on vehicle panels after driving, repair or workshop handling. It lifts away sticky and oily residues so primers and paints can adhere more predictably.

• Adhesives and tape residues
• Wax and polish build-up
• Road tar and asphalt spots
• Grease and light oil films
• Paint overspray and silicone contamination

How should I use SEM 38373 Solve for best results?

Apply SEM Solve to a clean, lint-free cloth and wipe the area in one direction until contaminants are removed. Allow the surface to flash off briefly; it evaporates quickly to leave a surface ready for primer or further work.

• Use with microfiber or tack cloths for lint-free wiping
• Test on an inconspicuous area with painted finishes sensitive to solvents
• Work in a well-ventilated area and avoid prolonged skin contact
• Repeat application for heavy contamination until cloth shows no residue

Will SEM Solve affect paint or trim finishes?

SEM Solve is formulated to remove contaminants while minimizing impact on intact factory paint when used correctly. However, strong solvents can soften certain plastics, decals, or aged paint, so performing a small test and using gentle technique is recommended.

• Safe for use before priming and refinishing when used per instructions
• Avoid extended dwell time on plastics, rubber or delicate trims
• Follow with recommended panel preparation steps from coating manufacturers

How does SEM Solve fit into a professional prep workflow?

SEM Solve is a preparatory step between mechanical prep (sanding, filling) and coating application. It removes invisible contaminants that sanding alone won't eliminate, helping primers and topcoats perform consistently.

• Use after sanding and cleaning to ensure adhesion points are contaminant-free
• Integrates with masking and bodywork stages in repair shops
• Compatible as a pre-paint wipe prior to SEM primers and paints

Who is this for? SEM 38373 Solve is intended for collision repair technicians, refinish professionals and careful hobbyists who require a reliable solvent wipe to prepare metal and painted surfaces. If your workflow demands consistent adhesion and a contaminant-free substrate before primer or topcoat, this product is designed to speed prep while reducing the risk of finish issues caused by adhesives, waxes, tar or grease.

Ingredients

Organic solvent blend